Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: y+xMnq2GAQgtEWDtmL4bmzkhkk4lXElI63eQuexne7YYr4sGuwOSIYc4WR7ewvbfrbfZ/l+wwf
 nJJd6vFrfp0g==
IronPort-SDR: SEXxIdaiYrAS7dJAlg01lHMaS35WrigDFWIcLFw6W1gvezAyHk1k6v+hE5lueYNP61iRHnwB0+
 Kt3w2PsxjQbA==
From:   "Ramuthevar,Vadivel MuruganX" 
        <vadivel.muruganx.ramuthevar@linux.intel.com>
To:     linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org,
        devicetree@vger.kernel.org, miquel.raynal@bootlin.com
Cc:     richard@nod.at, vigneshr@ti.com, arnd@arndb.de,
        brendanhiggins@google.com, tglx@linutronix.de,
        boris.brezillon@collabora.com, anders.roxell@linaro.org,
        masonccyang@mxic.com.tw, robh+dt@kernel.org,
        linux-mips@vger.kernel.org, hauke.mehrtens@intel.com,
        andriy.shevchenko@intel.com, qi-ming.wu@intel.com,
        cheol.yong.kim@intel.com,
        "Ramuthevar,Vadivel MuruganX" 
        <vadivel.muruganx.ramuthevar@linux.intel.com>
Subject: [PATCH v12 0/2] mtd: rawnand: Add NAND controller support on Intel LGM SoC
Date:   Wed,  1 Jul 2020 10:13:44 +0800
Message-Id: <20200701021346.54282-1-vadivel.muruganx.ramuthevar@linux.intel.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This patch adds the new IP of Nand Flash Controller(NFC) support
on Intel's Lightning Mountain(LGM) SoC.

DMA is used for burst data transfer operation, also DMA HW supports
aligned 32bit memory address and aligned data access by default.
DMA burst of 8 supported. Data register used to support the read/write
operation from/to device.

NAND controller also supports in-built HW ECC engine.

NAND controller driver implements ->exec_op() to replace legacy hooks,
these specific call-back method to execute NAND operations.

Thanks Miquel, Boris, Andy, Arnd and Rob for the review comments and suggestions.
---
v12:
  - address Miquel Raynal review comments update
  - add/modify the comments for better understanding
  - handle the check_only variable
  - update the ecc function based on the existing drivers
  - add newline
  - verify that mtd->name is set after nand_set_flash_node()
  - add the check WARN_ON(ret);
v11-resend:
  - Rebase to v5.8-rc1
v11:
  - No Change
v10:
  - No Change
v9:
  - No change
v8:
  - fix the kbuild bot warnings
  - correct the typo's
v7:
  - indentation issue is fixed
  - add error check for retrieve the resource from dt
v6:
  - update EBU_ADDR_SELx register base value build it from DT
  - Add tabs in in Kconfig
v5:
  - replace by 'HSNAND_CLE_OFFS | HSNAND_CS_OFFS' to NAND_WRITE_CMD and NAND_WRITE_ADDR
  - remove the unused macros
  - update EBU_ADDR_MASK(x) macro
  - update the EBU_ADDR_SELx register values to be written
v4:
  - add ebu_nand_cs structure for multiple-CS support
  - mask/offset encoding for 0x51 value
  - update macro HSNAND_CTL_ENABLE_ECC
  - drop the op argument and un-used macros.
  - updated the datatype and macros
  - add function disable nand module
  - remove ebu_host->dma_rx = NULL;
  - rename MMIO address range variables to ebu and hsnand
  - implement ->setup_data_interface()
  - update label err_cleanup_nand and err_cleanup_dma
  - add return value check in the nand_remove function
  - add/remove tabs and spaces as per coding standard
  - encoded CS ids by reg property
v3:
  - Add depends on MACRO in Kconfig
  - file name update in Makefile
  - file name update to intel-nand-controller
  - modification of MACRO divided like EBU, HSNAND and NAND
  - add NAND_ALE_OFFS, NAND_CLE_OFFS and NAND_CS_OFFS
  - rename lgm_ to ebu_ and _va suffix is removed in the whole file
  - rename structure and varaibles as per review comments.
  - remove lgm_read_byte(), lgm_dev_ready() and cmd_ctrl() un-used function
  - update in exec_op() as per review comments
  - rename function lgm_dma_exit() by lgm_dma_cleanup()
  - hardcoded magic value  for base and offset replaced by MACRO defined
  - mtd_device_unregister() + nand_cleanup() instead of nand_release()
v2:
  - implement the ->exec_op() to replaces the legacy hook-up.
  - update the commit message
  - add MIPS maintainers and xway_nand driver author in CC

v1:
 - initial version
 
dt-bindings: mtd: Add Nand Flash Controller support for Intel LGM SoC
---
v12:
  - No change
v11-resend:
  - No change
v11:
  - Fixed the compatible issue with example
10:
  - fix bot errors
v9:
  - Rob's review comments address
  - dual licensed
  - compatible change
  - add reg-names
  - drop clock-names and clock-cells
  - correct typo's
v8:
  No change
v7:
  - Rob's review comments addressed
  - dt-schema build issue fixed with upgraded dt-schema
v6:
  - Rob's review comments addressed in YAML file
  - add addr_sel0 and addr_sel1 reg-names in YAML example
v5:
  - add the example in YAML file
v4:
  - No change
v3:
  - No change
v2:
  YAML compatible string update to intel, lgm-nand-controller
v1:
  - initial version


Ramuthevar Vadivel Murugan (2):
  dt-bindings: mtd: Add Nand Flash Controller support for Intel LGM SoC
  mtd: rawnand: Add NAND controller support on Intel LGM SoC

 .../devicetree/bindings/mtd/intel,lgm-nand.yaml    |  99 +++
 drivers/mtd/nand/raw/Kconfig                       |   8 +
 drivers/mtd/nand/raw/Makefile                      |   1 +
 drivers/mtd/nand/raw/intel-nand-controller.c       | 757 +++++++++++++++++++++
 4 files changed, 865 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/intel,lgm-nand.yaml
 create mode 100644 drivers/mtd/nand/raw/intel-nand-controller.c

-- 
2.11.0