Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20200630164204.1.I2cc415fa5793b3e55acfd521ba8f0a71e79aa5f1@changeid>
 <20200701043001.73qhxyyjx6bayn2m@wunner.de> <20200701113904.7zh534vmlvjvojia@mobilestation>
In-Reply-To: <20200701113904.7zh534vmlvjvojia@mobilestation>
From:   Alain Michaud <alainmichaud@google.com>
Date:   Wed, 1 Jul 2020 08:46:21 -0400
Message-ID: <CALWDO_VbstuRPw-M13gf9JxsHb3Jhr7KEnCpFMoV6ZdDUohG1Q@mail.gmail.com>
Subject: Re: [PATCH] Revert "serial: 8250: Fix max baud limit in generic 8250 port"
To:     Serge Semin <Sergey.Semin@baikalelectronics.ru>,
        BlueZ <linux-bluetooth@vger.kernel.org>
Cc:     Lukas Wunner <lukas@wunner.de>,
        Daniel Winkler <danielwinkler@google.com>,
        Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
        linux-serial@vger.kernel.org, linux-mediatek@lists.infradead.org,
        chromeos-bluetooth-upstreaming 
        <chromeos-bluetooth-upstreaming@chromium.org>,
        Aaron Sierra <asierra@xes-inc.com>,
        Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Jiri Slaby <jslaby@suse.com>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        LKML <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Adding the bluetooth list as well per the Bluetooth impact.


On Wed, Jul 1, 2020 at 7:39 AM Serge Semin
<Sergey.Semin@baikalelectronics.ru> wrote:
>
> Hello Lukas,
>
> On Wed, Jul 01, 2020 at 06:30:01AM +0200, Lukas Wunner wrote:
> > On Tue, Jun 30, 2020 at 04:42:11PM -0700, Daniel Winkler wrote:
> > > This reverts commit 0eeaf62981ecc79e8395ca8caa1570eaf3a12257.
> >
> > That is not an upstream commit.  You probably mean:
> >
> >     commit 7b668c064ec33f3d687c3a413d05e355172e6c92
> >     Author: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> >     Date:   Thu May 7 02:31:32 2020 +0300
> >
> >     serial: 8250: Fix max baud limit in generic 8250 port
> >
> > And you didn't cc the commit author (hereby fixed).
> >
> > Thanks,
> >
> > Lukas
>
> Thanks for Cc'ing me.
>
> >
> > >
> > > The change regresses the QCA6174A-3 bluetooth chip, preventing
> > > firmware from being properly loaded. We have verified that without
> > > this patch, the chip works as intended.
>
> That text doesn't say what is really wrong and why the firmware couldn't be loaded.
> The original commit gets back the 8250 port baud rate limitation so if the baud
> gets out of the range [uartclk / 16 / UART_DIV_MAX; (port->uartclk + tolerance) /
> 16], then it will be clamped to be within it. That range is what the standard
> 8250 port supports. Acceptance of out of that range values will cause a
> problem further in calling serial8250_get_divisor() and uart_get_divisor()
> methods (see the original patch log message) for standard 8250 ports. Any different
> behavior must be taken into account by a custom set_termios() callbacks or at
> least must be workarounded so the standard 8250 ports wouldn't be affected. So in
> order to investigate the root cause of the problem it would be good to at least
> know what your platform was and what UART port has been used in the attempt to
> load the QCA6174A-3 chip firmware.
>
> -Sergey
>
> > >
> > > Signed-off-by: Daniel Winkler <danielwinkler@google.com>
> > > ---
> > >
> > >  drivers/tty/serial/8250/8250_port.c | 4 +---
> > >  1 file changed, 1 insertion(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
> > > index 1632f7d25acca..e057c65ac1580 100644
> > > --- a/drivers/tty/serial/8250/8250_port.c
> > > +++ b/drivers/tty/serial/8250/8250_port.c
> > > @@ -2618,8 +2618,6 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port,
> > >                                          struct ktermios *termios,
> > >                                          struct ktermios *old)
> > >  {
> > > -   unsigned int tolerance = port->uartclk / 100;
> > > -
> > >     /*
> > >      * Ask the core to calculate the divisor for us.
> > >      * Allow 1% tolerance at the upper limit so uart clks marginally
> > > @@ -2628,7 +2626,7 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port,
> > >      */
> > >     return uart_get_baud_rate(port, termios, old,
> > >                               port->uartclk / 16 / UART_DIV_MAX,
> > > -                             (port->uartclk + tolerance) / 16);
> > > +                             port->uartclk);
> > >  }
> > >
> > >  void
> > > --
> > > 2.27.0.212.ge8ba1cc988-goog
>
> --
> You received this message because you are subscribed to the Google Groups "ChromeOS Bluetooth Upstreaming" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to chromeos-bluetooth-upstreaming+unsubscribe@chromium.org.
> To post to this group, send email to chromeos-bluetooth-upstreaming@chromium.org.
> To view this discussion on the web visit https://groups.google.com/a/chromium.org/d/msgid/chromeos-bluetooth-upstreaming/20200701113904.7zh534vmlvjvojia%40mobilestation.