Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII;
 format=flowed
Content-Transfer-Encoding: 7bit
Date:   Thu, 02 Jul 2020 01:52:51 +0530
From:   Sibi Sankar <sibis@codeaurora.org>
To:     Rishabh Bhatnagar <rishabhb@codeaurora.org>
Cc:     linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
        bjorn.andersson@linaro.org, mathieu.poirier@linaro.org,
        tsoni@codeaurora.org, psodagud@codeaurora.org,
        sidgup@codeaurora.org, linux-kernel-owner@vger.kernel.org
Subject: Re: [PATCH v6 3/3] remoteproc: Add coredump debugfs entry
In-Reply-To: <1593460933-4262-4-git-send-email-rishabhb@codeaurora.org>
References: <1593460933-4262-1-git-send-email-rishabhb@codeaurora.org>
 <1593460933-4262-4-git-send-email-rishabhb@codeaurora.org>
Message-ID: <483d227972b66a86b08d1abd8c396d0a@codeaurora.org>
User-Agent: Roundcube Webmail/1.3.9
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On 2020-06-30 01:32, Rishabh Bhatnagar wrote:
> Add coredump debugfs entry to configure the type of dump that will
> be collected during recovery. User can select between default or
> inline coredump functionality. Also coredump collection can be
> disabled through this interface.
> This functionality can be configured differently for different
> remote processors.
> 
> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> ---
>  drivers/remoteproc/remoteproc_debugfs.c | 86 
> +++++++++++++++++++++++++++++++++
>  1 file changed, 86 insertions(+)
> 
> diff --git a/drivers/remoteproc/remoteproc_debugfs.c
> b/drivers/remoteproc/remoteproc_debugfs.c
> index 732770e..cca0a91 100644
> --- a/drivers/remoteproc/remoteproc_debugfs.c
> +++ b/drivers/remoteproc/remoteproc_debugfs.c
> @@ -28,6 +28,90 @@
>  static struct dentry *rproc_dbg;
> 
>  /*
> + * A coredump-configuration-to-string lookup table, for exposing a
> + * human readable configuration via debugfs. Always keep in sync with
> + * enum rproc_coredump_mechanism
> + */
> +static const char * const rproc_coredump_str[] = {
> +	[RPROC_COREDUMP_DEFAULT]	= "default",
> +	[RPROC_COREDUMP_INLINE]	= "inline",
> +	[RPROC_COREDUMP_DISABLED]	= "disabled",
> +};
> +
> +/* Expose the current coredump configuration via debugfs */
> +static ssize_t rproc_coredump_read(struct file *filp, char __user 
> *userbuf,
> +				   size_t count, loff_t *ppos)
> +{
> +	struct rproc *rproc = filp->private_data;
> +	const char *buf = rproc_coredump_str[rproc->dump_conf];

Nit: It would be nice to have a
line feed after the string.

Tested-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>

> +
> +	return simple_read_from_buffer(userbuf, count, ppos, buf, 
> strlen(buf));
> +}
> +
> +/*
> + * By writing to the 'coredump' debugfs entry, we control the behavior 
> of the
> + * coredump mechanism dynamically. The default value of this entry is
> "default".
> + *
> + * The 'coredump' debugfs entry supports these commands:
> + *
> + * default:	This is the default coredump mechanism. When the 
> remoteproc
> + *		crashes the entire coredump will be copied to a separate buffer
> + *		and exposed to userspace.
> + *
> + * inline:	The coredump will not be copied to a separate buffer and 
> the
> + *		recovery process will have to wait until data is read by
> + *		userspace. But this avoid usage of extra memory.
> + *
> + * disabled:	This will disable coredump. Recovery will proceed without
> + *		collecting any dump.
> + */
> +static ssize_t rproc_coredump_write(struct file *filp,
> +				    const char __user *user_buf, size_t count,
> +				    loff_t *ppos)
> +{
> +	struct rproc *rproc = filp->private_data;
> +	int ret, err = 0;
> +	char buf[20];
> +
> +	if (count > sizeof(buf))
> +		return -EINVAL;
> +
> +	ret = copy_from_user(buf, user_buf, count);
> +	if (ret)
> +		return -EFAULT;
> +
> +	/* remove end of line */
> +	if (buf[count - 1] == '\n')
> +		buf[count - 1] = '\0';
> +
> +	if (rproc->state == RPROC_CRASHED) {
> +		dev_err(&rproc->dev, "can't change coredump configuration\n");
> +		err = -EBUSY;
> +		goto out;
> +	}
> +
> +	if (!strncmp(buf, "disable", count)) {
> +		rproc->dump_conf = RPROC_COREDUMP_DISABLED;
> +	} else if (!strncmp(buf, "inline", count)) {
> +		rproc->dump_conf = RPROC_COREDUMP_INLINE;
> +	} else if (!strncmp(buf, "default", count)) {
> +		rproc->dump_conf = RPROC_COREDUMP_DEFAULT;
> +	} else {
> +		dev_err(&rproc->dev, "Invalid coredump configuration\n");
> +		err = -EINVAL;
> +	}
> +out:
> +	return err ? err : count;
> +}
> +
> +static const struct file_operations rproc_coredump_fops = {
> +	.read = rproc_coredump_read,
> +	.write = rproc_coredump_write,
> +	.open = simple_open,
> +	.llseek = generic_file_llseek,
> +};
> +
> +/*
>   * Some remote processors may support dumping trace logs into a shared
>   * memory buffer. We expose this trace buffer using debugfs, so users
>   * can easily tell what's going on remotely.
> @@ -337,6 +421,8 @@ void rproc_create_debug_dir(struct rproc *rproc)
>  			    rproc, &rproc_rsc_table_fops);
>  	debugfs_create_file("carveout_memories", 0400, rproc->dbg_dir,
>  			    rproc, &rproc_carveouts_fops);
> +	debugfs_create_file("coredump", 0600, rproc->dbg_dir,
> +			    rproc, &rproc_coredump_fops);
>  }
> 
>  void __init rproc_init_debugfs(void)

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.