Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH v3 5/7] iommu/vt-d: Fix devTLB flush for vSVA
To:     Jacob Pan <jacob.jun.pan@linux.intel.com>,
        iommu@lists.linux-foundation.org,
        LKML <linux-kernel@vger.kernel.org>,
        Lu Baolu <baolu.lu@linux.intel.com>,
        Joerg Roedel <joro@8bytes.org>,
        David Woodhouse <dwmw2@infradead.org>
Cc:     Yi Liu <yi.l.liu@intel.com>, "Tian, Kevin" <kevin.tian@intel.com>,
        Raj Ashok <ashok.raj@intel.com>
References: <1593617636-79385-1-git-send-email-jacob.jun.pan@linux.intel.com>
 <1593617636-79385-6-git-send-email-jacob.jun.pan@linux.intel.com>
From:   Auger Eric <eric.auger@redhat.com>
Message-ID: <f44409e8-7c68-9b26-cf87-b0887668e879@redhat.com>
Date:   Thu, 2 Jul 2020 10:39:26 +0200
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.5.0
MIME-Version: 1.0
In-Reply-To: <1593617636-79385-6-git-send-email-jacob.jun.pan@linux.intel.com>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Jacob, Yi,
On 7/1/20 5:33 PM, Jacob Pan wrote:
> From: Liu Yi L <yi.l.liu@intel.com>
> 
> For guest SVA usage, in order to optimize for less VMEXIT, guest request
> of IOTLB flush also includes device TLB.
> 
> On the host side, IOMMU driver performs IOTLB and implicit devTLB
> invalidation. When PASID-selective granularity is requested by the guest
> we need to derive the equivalent address range for devTLB instead of
> using the address information in the UAPI data. The reason for that is, unlike
> IOTLB flush, devTLB flush does not support PASID-selective granularity.
> This is to say, we need to set the following in the PASID based devTLB
> invalidation descriptor:
> - entire 64 bit range in address ~(0x1 << 63)
> - S bit = 1 (VT-d CH 6.5.2.6).
> 
> Without this fix, device TLB flush range is not set properly for PASID
> selective granularity. This patch also merged devTLB flush code for both
> implicit and explicit cases.
> 
> Fixes: 6ee1b77ba3ac ("iommu/vt-d: Add svm/sva invalidate function")
> Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
> Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> ---
>  drivers/iommu/intel/iommu.c | 28 ++++++++++++++++++----------
>  1 file changed, 18 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
> index 96340da57075..6a0c62c7395c 100644
> --- a/drivers/iommu/intel/iommu.c
> +++ b/drivers/iommu/intel/iommu.c
> @@ -5408,7 +5408,7 @@ intel_iommu_sva_invalidate(struct iommu_domain *domain, struct device *dev,
>  	sid = PCI_DEVID(bus, devfn);
>  
>  	/* Size is only valid in address selective invalidation */
> -	if (inv_info->granularity != IOMMU_INV_GRANU_PASID)
> +	if (inv_info->granularity == IOMMU_INV_GRANU_ADDR)
>  		size = to_vtd_size(inv_info->addr_info.granule_size,
>  				   inv_info->addr_info.nb_granules);
>  
> @@ -5417,6 +5417,7 @@ intel_iommu_sva_invalidate(struct iommu_domain *domain, struct device *dev,
>  			 IOMMU_CACHE_INV_TYPE_NR) {
>  		int granu = 0;
>  		u64 pasid = 0;
> +		u64 addr = 0;
>  
>  		granu = to_vtd_granularity(cache_type, inv_info->granularity);
>  		if (granu == -EINVAL) {
> @@ -5456,24 +5457,31 @@ intel_iommu_sva_invalidate(struct iommu_domain *domain, struct device *dev,
>  					(granu == QI_GRAN_NONG_PASID) ? -1 : 1 << size,
>  					inv_info->addr_info.flags & IOMMU_INV_ADDR_FLAGS_LEAF);
>  
> +			if (!info->ats_enabled)
> +				break;
>  			/*
>  			 * Always flush device IOTLB if ATS is enabled. vIOMMU
>  			 * in the guest may assume IOTLB flush is inclusive,
>  			 * which is more efficient.
>  			 */
> -			if (info->ats_enabled)
> -				qi_flush_dev_iotlb_pasid(iommu, sid,
> -						info->pfsid, pasid,
> -						info->ats_qdep,
> -						inv_info->addr_info.addr,
> -						size);
> -			break;
> +			fallthrough;
>  		case IOMMU_CACHE_INV_TYPE_DEV_IOTLB:
> +			/*
> +			 * There is no PASID selective flush for device TLB, so
> +			 * the equivalent of that is we set the size to be the
> +			 * entire range of 64 bit. User only provides PASID info
> +			 * without address info. So we set addr to 0.
The "PASID selective flush for device TLB" terminology above sounds a
bit confusing to me. I would rather say Intel device TLB has no support
for OMMU_INV_GRANU_PASID granularity but only supports
IOMMU_INV_GRANU_ADDR. Indeed 6.5.2.6 title is "PASID-based-Device-TLB
Invalidate Descriptor"
> +			 */
> +			if (inv_info->granularity == IOMMU_INV_GRANU_PASID) {
> +				size = 64 - VTD_PAGE_SHIFT;
> +				addr = 0;
I have my answer for previous patch review question. In that case the
addr is not formatted with the least significant 0 matching the size_order.

> +			} else if (inv_info->granularity == IOMMU_INV_GRANU_ADDR)
> +				addr = inv_info->addr_info.addr;
> +
>  			if (info->ats_enabled)
>  				qi_flush_dev_iotlb_pasid(iommu, sid,
>  						info->pfsid, pasid,
> -						info->ats_qdep,
> -						inv_info->addr_info.addr,
> +						info->ats_qdep, addr,
>  						size);
>  			else
>  				pr_warn_ratelimited("Passdown device IOTLB flush w/o ATS!\n");
> 

Besides

Reviewed-by: Eric Auger <eric.auger@redhat.com>

Thanks

Eric