Received: by 2002:a05:6902:102b:0:0:0:0 with SMTP id x11csp2398758ybt; Fri, 3 Jul 2020 08:07:22 -0700 (PDT) X-Google-Smtp-Source: ABdhPJysRt8eFDqY3MQwWtlDbAo2wgYIhzTKmQEPkmzrWJnn3+gLUv3T5DdZtlM+InCrpBzdEQ6I X-Received: by 2002:a17:906:57da:: with SMTP id u26mr33720081ejr.157.1593788841916; Fri, 03 Jul 2020 08:07:21 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1593788841; cv=none; d=google.com; s=arc-20160816; b=noJkqo9n5/96dhaSEn9YiMGHNKeDMKNViASH0oBW8U7EhgNUNWqurNJRk0I8FWsq2G zBTcQfefFNzdrq/lKILngvm7uBJtB/CS5E4lEmg4ZcElW6uIQPFoJKEygqfuFImQMIWh 1t6aGrPAj9KYns0s4D+MZElUDhYUKN2wubcEEC0FclENoUMI3nGSP7jPwF5Cj/gLJj0u OvKirylDUMXxiT/6LMOThE6ofdMo6/VveBG80P9hiO+LdyItcXA58vWSQg/XFdDFyWuv jZtV3tRruvZvTiGmIZ4G4z3GfOkzqvo1Fv7f034WSIkgDJQ8rDD+R2PeKnFFLQc4Yi7y gKdw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:in-reply-to:content-disposition :mime-version:references:message-id:subject:cc:to:from:date; bh=RYofaZWQ9GCTmt+gHtZszBwZar+5Gk4KkGFa9lDJHYM=; b=KMWzKm/j8Jf9z8yXPxtOcYKrH9BrMKHHz3WZzIG6YTfut/c6ltmzon0kfCoyJOkr7X qo6YNtz0QehGHCtG+U6Nptkhz1+5/z4hUnekFlKTmzZLzynOcnSl3E4+GGhT/9qoFyO/ rA7XpEbA4TBmkhEJtSTDYapM+lzA05K3GfFxRf53ewopyCRy+xj+96cFhlxu5/FhoeqY +u+4A8ChmwyGIzN+5GDdKAwEoiFglF33utWPwo4eZM947b7jv2r2AuHgkpDvYP8m/pSA 78jhCh3sWvNEOrIyaP/JxVclaMvcH2sK9UmzmOkawsX8tkTruQeaN4CRCUvSfkWfkioj YjFA== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id co20si7930250edb.131.2020.07.03.08.06.58; Fri, 03 Jul 2020 08:07:21 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726142AbgGCPGp (ORCPT + 99 others); Fri, 3 Jul 2020 11:06:45 -0400 Received: from asavdk3.altibox.net ([109.247.116.14]:49802 "EHLO asavdk3.altibox.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726039AbgGCPGo (ORCPT ); Fri, 3 Jul 2020 11:06:44 -0400 Received: from ravnborg.org (unknown [188.228.123.71]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by asavdk3.altibox.net (Postfix) with ESMTPS id 051642002D; Fri, 3 Jul 2020 17:06:38 +0200 (CEST) Date: Fri, 3 Jul 2020 17:06:37 +0200 From: Sam Ravnborg To: Vinay Simha BN Cc: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , David Airlie , open list , "open list:DRM DRIVERS" , Rob Herring Subject: Re: [PATCH v6 1/2] dt-binding: Add DSI/LVDS TC358775 bridge bindings Message-ID: <20200703150637.GD25632@ravnborg.org> References: <20200702123651.12177-1-simhavcs@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20200702123651.12177-1-simhavcs@gmail.com> X-CMAE-Score: 0 X-CMAE-Analysis: v=2.3 cv=f+hm+t6M c=1 sm=1 tr=0 a=S6zTFyMACwkrwXSdXUNehg==:117 a=S6zTFyMACwkrwXSdXUNehg==:17 a=kj9zAlcOel0A:10 a=pGLkceISAAAA:8 a=gEfo2CItAAAA:8 a=e5mUnYsNAAAA:8 a=0rtKju-ii_ScJ6bGwYQA:9 a=j2Z7r55SUaVgpyYN:21 a=LqFKNBjxuT_MqUgU:21 a=CjuIK1q_8ugA:10 a=sptkURWiP4Gy88Gu7hUp:22 a=Vxmtnl_E_bksehYqCbjh:22 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Vinay. On Thu, Jul 02, 2020 at 06:06:33PM +0530, Vinay Simha BN wrote: > Signed-off-by: Vinay Simha BN > > --- > v1: > Initial version wast .txt file > > v2: > From txt to yaml file format > > v3: > * Andrzej Hajda review comments incorporated > dual port lvds implemented > > * Laurent Pinchart review comments incorporated > dsi lanes property removed and it is dynamically > picked from the dsi ports > VESA/JEIDA format picked from panel-lvds dts > > v4: > * Sam Ravnborg review comments incorporated > }' is indented properly in examples data-lanes > description for single-link and dual-link lvds > --- > .../display/bridge/toshiba,tc358775.yaml | 215 ++++++++++++++++++ > 1 file changed, 215 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > new file mode 100644 > index 000000000000..9ddd63bee403 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > @@ -0,0 +1,215 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 One detail that I missed - any specific reason this is not (GPL-2.0-only OR BSD-2-Clause) This is the preferred license for new bindings - as checkpatch also tells you. Sam > +--- > +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Toshiba TC358775 DSI to LVDS bridge bindings > + > +maintainers: > + - Vinay Simha BN > + > +description: | > + This binding supports DSI to LVDS bridge TC358775 > + > + MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane. > + Video frame size: > + Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel > + limited by 135 MHz LVDS speed > + Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display > + panel, limited by 270 MHz LVDS speed. > + > +properties: > + compatible: > + const: toshiba,tc358775 > + > + reg: > + maxItems: 1 > + description: i2c address of the bridge, 0x0f > + > + vdd-supply: > + maxItems: 1 > + description: 1.2V LVDS Power Supply > + > + vddio-supply: > + maxItems: 1 > + description: 1.8V IO Power Supply > + > + stby-gpios: > + maxItems: 1 > + description: Standby pin, Low active > + > + reset-gpios: > + maxItems: 1 > + description: Hardware reset, Low active > + > + ports: > + type: object > + description: > + A node containing input and output port nodes with endpoint definitions > + as documented in > + Documentation/devicetree/bindings/media/video-interfaces.txt > + properties: > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + port@0: > + type: object > + description: | > + DSI Input. The remote endpoint phandle should be a > + reference to a valid mipi_dsi_host device node. > + > + port@1: > + type: object > + description: | > + Video port for LVDS output (panel or connector). > + > + port@2: > + type: object > + description: | > + Video port for Dual link LVDS output (panel or connector). > + > + required: > + - port@0 > + - port@1 > + > +required: > + - compatible > + - reg > + - vdd-supply > + - vddio-supply > + - stby-gpios > + - reset-gpios > + - ports > + > +examples: > + - | > + #include > + > + /* For single-link LVDS display panel */ > + > + i2c@78b8000 { > + /* On High speed expansion */ > + label = "HS-I2C2"; > + reg = <0x078b8000 0x500>; > + clock-frequency = <400000>; /* fastmode operation */ > + #address-cells = <1>; > + #size-cells = <0>; > + > + tc_bridge: bridge@f { > + compatible = "toshiba,tc358775"; > + reg = <0x0f>; > + > + vdd-supply = <&pm8916_l2>; > + vddio-supply = <&pm8916_l6>; > + > + stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>; > + reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + d2l_in_test: endpoint { > + remote-endpoint = <&dsi0_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + lvds_out: endpoint { > + remote-endpoint = <&panel_in>; > + }; > + }; > + }; > + }; > + }; > + > + dsi@1a98000 { > + reg = <0x1a98000 0x25c>; > + reg-names = "dsi_ctrl"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@1 { > + reg = <1>; > + dsi0_out: endpoint { > + remote-endpoint = <&d2l_in_test>; > + data-lanes = <0 1 2 3>; > + }; > + }; > + }; > + }; > + > + - | > + /* For dual-link LVDS display panel */ > + > + i2c@78b8000 { > + /* On High speed expansion */ > + label = "HS-I2C2"; > + reg = <0x078b8000 0x500>; > + clock-frequency = <400000>; /* fastmode operation */ > + #address-cells = <1>; > + #size-cells = <0>; > + > + tc_bridge_dual: bridge@f { > + compatible = "toshiba,tc358775"; > + reg = <0x0f>; > + > + vdd-supply = <&pm8916_l2>; > + vddio-supply = <&pm8916_l6>; > + > + stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>; > + reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + d2l_in_dual: endpoint { > + remote-endpoint = <&dsi0_out_dual>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + lvds0_out: endpoint { > + remote-endpoint = <&panel_in0>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + lvds1_out: endpoint { > + remote-endpoint = <&panel_in1>; > + }; > + }; > + }; > + }; > + }; > + > + dsi@1a98000 { > + reg = <0x1a98000 0x25c>; > + reg-names = "dsi_ctrl"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@1 { > + reg = <1>; > + dsi0_out_dual: endpoint { > + remote-endpoint = <&d2l_in_dual>; > + data-lanes = <0 1 2 3>; > + }; > + }; > + }; > + }; > +... > -- > 2.17.1 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel