Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <CAFXsbZo3xXXgCSd4AgDs8U46hBR0+HkQgzsvwJ=B6rUiondydA@mail.gmail.com>
In-Reply-To: <CAFXsbZo3xXXgCSd4AgDs8U46hBR0+HkQgzsvwJ=B6rUiondydA@mail.gmail.com>
From:   Fabio Estevam <festevam@gmail.com>
Date:   Mon, 6 Jul 2020 20:17:36 -0300
Message-ID: <CAOMZO5C1TeUzTYtdBWvtcuc=U52SvC4RFmU8_RRDf6RprABD6w@mail.gmail.com>
Subject: Re: [PATCH] arm: DT: vf610-zii-scu4-aib.dts: Configure fibre ports to 1000BaseX
To:     Chris Healy <cphealy@gmail.com>
Cc:     Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Stefan Agner <stefan@agner.ch>,
        Rob Herring <robh+dt@kernel.org>,
        linux ARM <linux-arm-kernel@lists.infradead.org>,
        linux-kernel <linux-kernel@vger.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>, Andrew Lunn <andrew@lunn.ch>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Chris,

Subject style is usually:

ARM: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX

On Sun, Jul 5, 2020 at 10:02 PM Chris Healy <cphealy@gmail.com> wrote:
>
> The SFF soldered onto the board expect the ports to use 1000BaseX.  It
> makes no sense to have the ports set to SGMII, since they don't even
> support that mode.
>
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> Signed-off-by: Chris Healy <cphealy@gmail.com>

Not clear here if the original Author is Andrew and you are forwarding
his patch.

If this is the case, then Andrew's name should appear in the From line.