Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH 6/6] phy: stm32: use NULL instead of zero
To:     Vinod Koul <vkoul@kernel.org>,
        Kishon Vijay Abraham I <kishon@ti.com>
CC:     <linux-kernel@vger.kernel.org>
References: <20200708132809.265967-1-vkoul@kernel.org>
 <20200708132809.265967-6-vkoul@kernel.org>
From:   Amelie DELAUNAY <amelie.delaunay@st.com>
Message-ID: <2f81b551-c0ec-686d-7662-9b3092b82a4e@st.com>
Date:   Wed, 8 Jul 2020 15:35:25 +0200
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.8.0
MIME-Version: 1.0
In-Reply-To: <20200708132809.265967-6-vkoul@kernel.org>
Content-Type: text/plain; charset="utf-8"; format=flowed
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Vinod,

On 7/8/20 3:28 PM, Vinod Koul wrote:
> devm_clk_get() and devm_reset_control_get() expect a const char *id for
> the last arg, but a value of zero was provided. This results in below
> sparse warning:
> 
> drivers/phy/st/phy-stm32-usbphyc.c:330:42: warning: Using plain integer as NULL pointer
> drivers/phy/st/phy-stm32-usbphyc.c:343:52: warning: Using plain integer as NULL pointer
> 
> Instead of zero, use NULL
> 
> Cc: Amelie Delaunay <amelie.delaunay@st.com>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Amelie Delaunay <amelie.delaunay@st.com>

Thanks!

Regards,
Amelie

> ---
>   drivers/phy/st/phy-stm32-usbphyc.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
> index 56bdea4b0bd9..2b3639cba51a 100644
> --- a/drivers/phy/st/phy-stm32-usbphyc.c
> +++ b/drivers/phy/st/phy-stm32-usbphyc.c
> @@ -327,7 +327,7 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
>   	if (IS_ERR(usbphyc->base))
>   		return PTR_ERR(usbphyc->base);
>   
> -	usbphyc->clk = devm_clk_get(dev, 0);
> +	usbphyc->clk = devm_clk_get(dev, NULL);
>   	if (IS_ERR(usbphyc->clk)) {
>   		ret = PTR_ERR(usbphyc->clk);
>   		dev_err(dev, "clk get failed: %d\n", ret);
> @@ -340,7 +340,7 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
>   		return ret;
>   	}
>   
> -	usbphyc->rst = devm_reset_control_get(dev, 0);
> +	usbphyc->rst = devm_reset_control_get(dev, NULL);
>   	if (!IS_ERR(usbphyc->rst)) {
>   		reset_control_assert(usbphyc->rst);
>   		udelay(2);
>