Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Maxime Ripard <maxime@cerno.tech>
To:     Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
        Eric Anholt <eric@anholt.net>
Cc:     dri-devel@lists.freedesktop.org,
        linux-rpi-kernel@lists.infradead.org,
        bcm-kernel-feedback-list@broadcom.com,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        Dave Stevenson <dave.stevenson@raspberrypi.com>,
        Tim Gover <tim.gover@raspberrypi.com>,
        Phil Elwell <phil@raspberrypi.com>,
        Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH v4 53/78] drm/vc4: hdmi: Add PHY init and disable function
Date:   Wed,  8 Jul 2020 19:42:01 +0200
Message-Id: <9ac309938e18a55c1c48d3520fe51a61f3c09b1f.1594230107.git-series.maxime@cerno.tech>
In-Reply-To: <cover.7a1aa1784976093af26cb31fd283cf5b3ed568bb.1594230107.git-series.maxime@cerno.tech>
References: <cover.7a1aa1784976093af26cb31fd283cf5b3ed568bb.1594230107.git-series.maxime@cerno.tech>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The HDMI PHY in the BCM2711 HDMI controller is significantly more
complicated to setup than in the older BCM283x SoCs.

Let's add hooks to enable and disable the PHY.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/Makefile       |  1 +
 drivers/gpu/drm/vc4/vc4_hdmi.c     | 14 +++++++-------
 drivers/gpu/drm/vc4/vc4_hdmi.h     | 13 +++++++++++++
 drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 25 +++++++++++++++++++++++++
 4 files changed, 46 insertions(+), 7 deletions(-)
 create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_phy.c

diff --git a/drivers/gpu/drm/vc4/Makefile b/drivers/gpu/drm/vc4/Makefile
index b303703bc7f3..d0163e18e9ca 100644
--- a/drivers/gpu/drm/vc4/Makefile
+++ b/drivers/gpu/drm/vc4/Makefile
@@ -12,6 +12,7 @@ vc4-y := \
 	vc4_kms.o \
 	vc4_gem.o \
 	vc4_hdmi.o \
+	vc4_hdmi_phy.o \
 	vc4_vec.o \
 	vc4_hvs.o \
 	vc4_irq.o \
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 80bc3dd9d4a8..068041145d1c 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -321,7 +321,9 @@ static void vc4_hdmi_encoder_disable(struct drm_encoder *encoder)
 
 	HDMI_WRITE(HDMI_RAM_PACKET_CONFIG, 0);
 
-	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+	if (vc4_hdmi->variant->phy_disable)
+		vc4_hdmi->variant->phy_disable(vc4_hdmi);
+
 	HDMI_WRITE(HDMI_VID_CTL,
 		   HDMI_READ(HDMI_VID_CTL) & ~VC4_HD_VID_CTL_ENABLE);
 
@@ -381,12 +383,8 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
 	if (vc4_hdmi->variant->reset)
 		vc4_hdmi->variant->reset(vc4_hdmi);
 
-	/* PHY should be in reset, like
-	 * vc4_hdmi_encoder_disable() does.
-	 */
-	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
-
-	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0);
+	if (vc4_hdmi->variant->phy_init)
+		vc4_hdmi->variant->phy_init(vc4_hdmi, mode);
 
 	if (debug_dump_regs) {
 		struct drm_printer p = drm_info_printer(&vc4_hdmi->pdev->dev);
@@ -1433,6 +1431,8 @@ static const struct vc4_hdmi_variant bcm2835_variant = {
 
 	.init_resources		= vc4_hdmi_init_resources,
 	.reset			= vc4_hdmi_reset,
+	.phy_init		= vc4_hdmi_phy_init,
+	.phy_disable		= vc4_hdmi_phy_disable,
 };
 
 static const struct of_device_id vc4_hdmi_dt_match[] = {
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 17a30589f39c..32c80161c786 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -21,6 +21,8 @@ to_vc4_hdmi_encoder(struct drm_encoder *encoder)
 	return container_of(encoder, struct vc4_hdmi_encoder, base.base);
 }
 
+struct drm_display_mode;
+
 struct vc4_hdmi;
 struct vc4_hdmi_register;
 
@@ -38,6 +40,13 @@ struct vc4_hdmi_variant {
 
 	/* Callback to reset the HDMI block */
 	void (*reset)(struct vc4_hdmi *vc4_hdmi);
+
+	/* Callback to initialize the PHY according to the mode */
+	void (*phy_init)(struct vc4_hdmi *vc4_hdmi,
+			 struct drm_display_mode *mode);
+
+	/* Callback to disable the PHY */
+	void (*phy_disable)(struct vc4_hdmi *vc4_hdmi);
 };
 
 /* HDMI audio information */
@@ -95,4 +104,8 @@ encoder_to_vc4_hdmi(struct drm_encoder *encoder)
 	return container_of(_encoder, struct vc4_hdmi, encoder);
 }
 
+void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi,
+		       struct drm_display_mode *mode);
+void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi);
+
 #endif /* _VC4_HDMI_H_ */
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi_phy.c b/drivers/gpu/drm/vc4/vc4_hdmi_phy.c
new file mode 100644
index 000000000000..5a1746877bb5
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_hdmi_phy.c
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015 Broadcom
+ * Copyright (c) 2014 The Linux Foundation. All rights reserved.
+ * Copyright (C) 2013 Red Hat
+ * Author: Rob Clark <robdclark@gmail.com>
+ */
+
+#include "vc4_hdmi.h"
+#include "vc4_hdmi_regs.h"
+
+void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi, struct drm_display_mode *mode)
+{
+	/* PHY should be in reset, like
+	 * vc4_hdmi_encoder_disable() does.
+	 */
+
+	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0);
+}
+
+void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi)
+{
+	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+}
-- 
git-series 0.9.1