Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: Vou0g69t7zYbuD3w2fRfvSXgXE9sLznISKF1FzkK0m2Xooh8bIMaXU4b90j57bNETNayN36VVm
 bZu5rSXSdDiA==
IronPort-SDR: 6I9X6m+Z61OZ8Atkmrna7xxMRQP1yGd6+RImi/UozIiV1cdsHkepI0iXwZLJKTsebq1bn4HcWs
 kkG1UOH0M/fg==
Date:   Wed, 8 Jul 2020 21:45:21 +0300
From:   Imre Deak <imre.deak@intel.com>
To:     Lyude Paul <lyude@redhat.com>
Cc:     dri-devel@lists.freedesktop.org, David Airlie <airlied@linux.ie>,
        linux-kernel@vger.kernel.org,
        Thomas Zimmermann <tzimmermann@suse.de>,
        Lee Shawn C <shawn.c.lee@intel.com>
Subject: Re: [PATCH 1/2] drm/probe_helper: Add
 drm_connector_helper_funcs.mode_valid_ctx
Message-ID: <20200708184521.GC21536@ideak-desk.fi.intel.com>
Reply-To: imre.deak@intel.com
References: <20200526182313.4005-1-lyude@redhat.com>
 <20200526182313.4005-2-lyude@redhat.com>
 <20200707224036.GA22747@ideak-desk.fi.intel.com>
 <b8d176ed8838ea0d63b794f5fd5d54b71afc0d69.camel@redhat.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <b8d176ed8838ea0d63b794f5fd5d54b71afc0d69.camel@redhat.com>
User-Agent: Mutt/1.9.4 (2018-02-28)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Wed, Jul 08, 2020 at 01:25:14PM -0400, Lyude Paul wrote:
> 
> JFYI - found an issue with this patch that wouldn't have shown up on i915, info
> down below: 
> 
> On Wed, 2020-07-08 at 01:40 +0300, Imre Deak wrote:
> > Sorry for the delay, the review as I promised:
> > 
> > On Tue, May 26, 2020 at 02:23:09PM -0400, Lyude Paul wrote:
> > > This is just an atomic version of mode_valid, which is intended to be
> > > used for situations where a driver might need to check the atomic state
> > > of objects other than the connector itself. One such example is with
> > > MST, where the maximum possible bandwidth on a connector can change
> > > dynamically irregardless of the display configuration.
> > > 
> > > Signed-off-by: Lyude Paul <lyude@redhat.com>
> > > Cc: Lee Shawn C <shawn.c.lee@intel.com>
> > > Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
> > > ---
> > >  drivers/gpu/drm/drm_crtc_helper_internal.h |  6 +-
> > >  drivers/gpu/drm/drm_probe_helper.c         | 65 ++++++++++++++--------
> > >  include/drm/drm_modeset_helper_vtables.h   | 41 ++++++++++++++
> > >  3 files changed, 88 insertions(+), 24 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/drm_crtc_helper_internal.h
> > > b/drivers/gpu/drm/drm_crtc_helper_internal.h
> > > index f0a66ef47e5ad..ca767cba6094d 100644
> > > --- a/drivers/gpu/drm/drm_crtc_helper_internal.h
> > > +++ b/drivers/gpu/drm/drm_crtc_helper_internal.h
> > > @@ -73,8 +73,10 @@ enum drm_mode_status drm_crtc_mode_valid(struct drm_crtc
> > > *crtc,
> > >  					 const struct drm_display_mode *mode);
> > >  enum drm_mode_status drm_encoder_mode_valid(struct drm_encoder *encoder,
> > >  					    const struct drm_display_mode
> > > *mode);
> > > -enum drm_mode_status drm_connector_mode_valid(struct drm_connector
> > > *connector,
> > > -					      struct drm_display_mode *mode);
> > > +enum drm_mode_status
> > > +drm_connector_mode_valid(struct drm_connector *connector,
> > > +			 struct drm_display_mode *mode,
> > > +			 struct drm_modeset_acquire_ctx *ctx);
> > >  
> > >  struct drm_encoder *
> > >  drm_connector_get_single_encoder(struct drm_connector *connector);
> > > diff --git a/drivers/gpu/drm/drm_probe_helper.c
> > > b/drivers/gpu/drm/drm_probe_helper.c
> > > index 466dfbba82564..3132784736841 100644
> > > --- a/drivers/gpu/drm/drm_probe_helper.c
> > > +++ b/drivers/gpu/drm/drm_probe_helper.c
> > > @@ -86,16 +86,17 @@ drm_mode_validate_flag(const struct drm_display_mode
> > > *mode,
> > >  	return MODE_OK;
> > >  }
> > >  
> > > -static enum drm_mode_status
> > > +static int
> > >  drm_mode_validate_pipeline(struct drm_display_mode *mode,
> > > -			    struct drm_connector *connector)
> > > +			   struct drm_connector *connector,
> > > +			   struct drm_modeset_acquire_ctx *ctx)
> > >  {
> > >  	struct drm_device *dev = connector->dev;
> > > -	enum drm_mode_status ret = MODE_OK;
> > >  	struct drm_encoder *encoder;
> > > +	int ret = MODE_OK;
> > >  
> > >  	/* Step 1: Validate against connector */
> > > -	ret = drm_connector_mode_valid(connector, mode);
> > > +	ret = drm_connector_mode_valid(connector, mode, ctx);
> > >  	if (ret != MODE_OK)
> > >  		return ret;
> > >  
> > > @@ -196,16 +197,23 @@ enum drm_mode_status drm_encoder_mode_valid(struct
> > > drm_encoder *encoder,
> > >  	return encoder_funcs->mode_valid(encoder, mode);
> > >  }
> > >  
> > > -enum drm_mode_status drm_connector_mode_valid(struct drm_connector
> > > *connector,
> > > -					      struct drm_display_mode *mode)
> > > +int
> > > +drm_connector_mode_valid(struct drm_connector *connector,
> > > +			 struct drm_display_mode *mode,
> > > +			 struct drm_modeset_acquire_ctx *ctx)
> > >  {
> > >  	const struct drm_connector_helper_funcs *connector_funcs =
> > >  		connector->helper_private;
> > >  
> > > -	if (!connector_funcs || !connector_funcs->mode_valid)
> > > +	if (!connector_funcs)
> > >  		return MODE_OK;
> > >  
> > > -	return connector_funcs->mode_valid(connector, mode);
> > > +	if (connector_funcs->mode_valid_ctx)
> > > +		return connector_funcs->mode_valid_ctx(connector, mode, ctx);
> > > +	else if (connector_funcs->mode_valid)
> > > +		return connector_funcs->mode_valid(connector, mode);
> > > +	else
> > > +		return MODE_OK;
> > >  }
> > >  
> > >  #define DRM_OUTPUT_POLL_PERIOD (10*HZ)
> > > @@ -375,8 +383,9 @@ EXPORT_SYMBOL(drm_helper_probe_detect);
> > >   *      (if specified)
> > >   *    - drm_mode_validate_flag() checks the modes against basic connector
> > >   *      capabilities (interlace_allowed,doublescan_allowed,stereo_allowed)
> > > - *    - the optional &drm_connector_helper_funcs.mode_valid helper can
> > > perform
> > > - *      driver and/or sink specific checks
> > > + *    - the optional &drm_connector_helper_funcs.mode_valid or
> > > + *      &drm_connector_helper_funcs.mode_valid_ctx helpers can perform
> > > driver
> > > + *      and/or sink specific checks
> > >   *    - the optional &drm_crtc_helper_funcs.mode_valid,
> > >   *      &drm_bridge_funcs.mode_valid and
> > > &drm_encoder_helper_funcs.mode_valid
> > >   *      helpers can perform driver and/or source specific checks which are
> > > also
> > > @@ -507,22 +516,34 @@ int drm_helper_probe_single_connector_modes(struct
> > > drm_connector *connector,
> > >  		mode_flags |= DRM_MODE_FLAG_3D_MASK;
> > >  
> > >  	list_for_each_entry(mode, &connector->modes, head) {
> > > -		if (mode->status == MODE_OK)
> > > -			mode->status = drm_mode_validate_driver(dev, mode);
> > > +		if (mode->status != MODE_OK)
> > > +			continue;
> > > +
> > > +		mode->status = drm_mode_validate_driver(dev, mode);
> > > +		if (mode->status != MODE_OK)
> > > +			continue;
> > >  
> > > -		if (mode->status == MODE_OK)
> > > -			mode->status = drm_mode_validate_size(mode, maxX, maxY);
> > > +		mode->status = drm_mode_validate_size(mode, maxX, maxY);
> > > +		if (mode->status != MODE_OK)
> > > +			continue;
> > >  
> > > -		if (mode->status == MODE_OK)
> > > -			mode->status = drm_mode_validate_flag(mode, mode_flags);
> > > +		mode->status = drm_mode_validate_flag(mode, mode_flags);
> > > +		if (mode->status != MODE_OK)
> > > +			continue;
> > >  
> > > -		if (mode->status == MODE_OK)
> > > -			mode->status = drm_mode_validate_pipeline(mode,
> > > -								  connector);
> > > +		ret = drm_mode_validate_pipeline(mode, connector, &ctx);
> > > +		if (ret == -EDEADLK) {
> > > +			drm_modeset_backoff(&ctx);
> > > +			goto retry;
> > > +		} else if (WARN_ON_ONCE(ret < 0)) {
> > > +			mode->status = MODE_BAD;
> 
> This check is wrong actually. We define negative values for drm_mode_status
> (MODE_BAD, MODE_ERROR, MODE_STALE) which, at least with how drivers currently
> seem to use them, are something we want to treat as not-unexpected errors and
> not WARN_ON.

Ah, yes, missed that.

> This is a bit annoying because it does mean there's some overlap between
> drm_mode_status and some legitimate errno values (EPERM, ENOENT, ESRCH). Luckily
> I can't see any reason why drivers would want to return those, but I think we
> should probably print a debugging message when we get any errno values just so
> developers don't get confused (also going to add a IS_ERR() equivalent for
> drm_mode_status, but with a different name)

Maybe I'm missing something, but having negative values in
drm_mode_status doesn't make sense to me, as all the non-zero values
there just mean the mode is incorrect for some reason and should be
pruned.

Would it make sense to better separate the mode-status value and any
error return value from mode_valid_ctx(), by adding a drm_mode_status *
parameter to the hook and drm_mode_validate_pipeline()?

> 
> > > +		} else {
> > > +			mode->status = ret;
> > > +		}
> > >  
> > > -		if (mode->status == MODE_OK)
> > > -			mode->status = drm_mode_validate_ycbcr420(mode,
> > > -								  connector);
> > > +		if (mode->status != MODE_OK)
> > > +			continue;
> > > +		mode->status = drm_mode_validate_ycbcr420(mode, connector);
> > >  	}
> > >  
> > >  prune:
> > > diff --git a/include/drm/drm_modeset_helper_vtables.h
> > > b/include/drm/drm_modeset_helper_vtables.h
> > > index 421a30f084631..8f020c3424b2b 100644
> > > --- a/include/drm/drm_modeset_helper_vtables.h
> > > +++ b/include/drm/drm_modeset_helper_vtables.h
> > > @@ -968,6 +968,47 @@ struct drm_connector_helper_funcs {
> > >  	 */
> > >  	enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
> > >  					   struct drm_display_mode *mode);
> > > +
> > > +	/**
> > > +	 * @mode_valid_ctx:
> > > +	 *
> > > +	 * Callback to validate a mode for a connector, irrespective of the
> > > +	 * specific display configuration.
> > > +	 *
> > > +	 * This callback is used by the probe helpers to filter the mode list
> > > +	 * (which is usually derived from the EDID data block from the sink).
> > > +	 * See e.g. drm_helper_probe_single_connector_modes().
> > > +	 *
> > > +	 * This function is optional, and is the atomic version of
> > > +	 * &drm_connector_funcs.mode_valid.
> > > +	 *
> > > +	 * To allow for accessing the atomic state of modesetting objects, the
> > > +	 * helper libraries always call this with ctx set to a valid context,
> > > +	 * and &drm_mode_config.connection_mutex will always be locked with
> > > +	 * the ctx parameter set to @ctx. This allows for taking additional
> > > +	 * locks as required.
> > > +	 *
> > > +	 * Even though additional locks may be acquired, this callback is
> > > +	 * still expected not to take any constraints into account which would
> > > +	 * be influenced by the currently set display state - such constraints
> > > +	 * should be handled in the driver's atomic check. For example, if a
> > > +	 * connector shares display bandwidth with other connectors then it
> > > +	 * would be ok to validate a mode uses against the maximum possible
> >                                      ^mode against?
> > 
> > Reviewed-by: Imre Deak <imre.deak@intel.com>
> > 
> > > +	 * bandwidth of the connector. But it wouldn't be ok to take the
> > > +	 * current bandwidth usage of other connectors into account, as this
> > > +	 * would change depending on the display state.
> > > +	 *
> > > +	 * Returns:
> > > +	 *
> > > +	 * Either &drm_mode_status.MODE_OK, one of the failure reasons in
> > > +	 * &enum drm_mode_status, or -EDEADLK if a deadlock would have
> > > +	 * occurred and we need to backoff.
> > > +	 *
> > > +	 */
> > > +	int (*mode_valid_ctx)(struct drm_connector *connector,
> > > +			      struct drm_display_mode *mode,
> > > +			      struct drm_modeset_acquire_ctx *ctx);
> > > +
> > >  	/**
> > >  	 * @best_encoder:
> > >  	 *
> > > -- 
> > > 2.26.2
> > > 
> > > _______________________________________________
> > > dri-devel mailing list
> > > dri-devel@lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>