Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20200708232501.6200-1-cphealy@gmail.com>
In-Reply-To: <20200708232501.6200-1-cphealy@gmail.com>
From:   Fabio Estevam <festevam@gmail.com>
Date:   Wed, 8 Jul 2020 21:11:53 -0300
Message-ID: <CAOMZO5Dshsx++kdd3rdew8CJXTA7ktKnpaoJjtTGW9pfvDeHEQ@mail.gmail.com>
Subject: Re: [PATCH v2] ARM: dts: vf610-zii-dev-rev-c: Configure fiber port to 1000BaseX
To:     Chris Healy <cphealy@gmail.com>
Cc:     Andrew Lunn <andrew@lunn.ch>, Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Stefan Agner <stefan@agner.ch>,
        Rob Herring <robh+dt@kernel.org>,
        "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
        <linux-arm-kernel@lists.infradead.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        linux-kernel <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Wed, Jul 8, 2020 at 8:25 PM Chris Healy <cphealy@gmail.com> wrote:
>
> The SFF soldered onto the board expects the port to use 1000BaseX.  It
> makes no sense to have the port set to SGMII, since it doesn't even
> support that mode.
>
> Signed-off-by: Chris Healy <cphealy@gmail.com>

Reviewed-by: Fabio Estevam <festevam@gmail.com>