Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Chris Healy <cphealy@gmail.com>
To:     shawnguo@kernel.org, s.hauer@pengutronix.de, stefan@agner.ch,
        robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        festevam@gmail.com
Cc:     Andrew Lunn <andrew@lunn.ch>, Chris Healy <cphealy@gmail.com>
Subject: [PATCH v2] arm: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX
Date:   Wed,  8 Jul 2020 17:11:54 -0700
Message-Id: <20200709001154.7403-1-cphealy@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: Andrew Lunn <andrew@lunn.ch>

The SFF soldered onto the board expect the ports to use 1000BaseX.  It
makes no sense to have the ports set to SGMII, since they don't even
support that mode.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Chris Healy <cphealy@gmail.com>
---
v2:
- convert spaces back to tabs
- Correct from line to show Andrew as the original author

 arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index b642520199ba..040a1f8b6130 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -186,7 +186,7 @@
 					port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_2";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff1>;
 					};
@@ -194,7 +194,7 @@
 					port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_3";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff2>;
 					};
@@ -202,7 +202,7 @@
 					port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_4";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff3>;
 					};
@@ -210,7 +210,7 @@
 					port@5 {
 						reg = <5>;
 						label = "eth_fc_1000_5";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff4>;
 					};
@@ -218,7 +218,7 @@
 					port@6 {
 						reg = <6>;
 						label = "eth_fc_1000_6";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff5>;
 					};
@@ -226,7 +226,7 @@
 					port@7 {
 						reg = <7>;
 						label = "eth_fc_1000_7";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff6>;
 					};
@@ -234,7 +234,7 @@
 					port@9 {
 						reg = <9>;
 						label = "eth_fc_1000_1";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff0>;
 					};
@@ -269,7 +269,7 @@
 					port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_8";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff7>;
 					};
@@ -277,7 +277,7 @@
 					port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_9";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff8>;
 					};
@@ -285,7 +285,7 @@
 					port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_10";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff9>;
 					};
-- 
2.21.3