Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Sumit Semwal <sumit.semwal@linaro.org>
To:     agross@kernel.org, bjorn.andersson@linaro.org, lgirdwood@gmail.com,
        broonie@kernel.org, robh+dt@kernel.org
Cc:     nishakumari@codeaurora.org, linux-arm-msm@vger.kernel.org,
        linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
        kgunda@codeaurora.org, rnayak@codeaurora.org,
        Sumit Semwal <sumit.semwal@linaro.org>
Subject: [RESEND PATCH v5 3/4] arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators
Date:   Fri, 10 Jul 2020 10:59:18 +0530
Message-Id: <20200710052919.2611-4-sumit.semwal@linaro.org>
In-Reply-To: <20200710052919.2611-1-sumit.semwal@linaro.org>
References: <20200710052919.2611-1-sumit.semwal@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: Nisha Kumari <nishakumari@codeaurora.org>

This patch adds devicetree nodes for LAB and IBB regulators.

Signed-off-by: Nisha Kumari <nishakumari@codeaurora.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
  [sumits: Updated for better compatible strings and names]

---
v5: sumits: removed interrupt-names, since there is only one
            interrupt per node
v4: sumits: removed labibb label which is not needed
v3: sumits: updated interrupt-names as per review comments
v2: sumits: updated for better compatible string and names
---
 arch/arm64/boot/dts/qcom/pmi8998.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index 23f9146a161e..d016b12967eb 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -25,5 +25,17 @@ pmi8998_lsid1: pmic@3 {
 		reg = <0x3 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		labibb {
+			compatible = "qcom,pmi8998-lab-ibb";
+
+			ibb: ibb {
+				interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			lab: lab {
+				interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
 	};
 };
-- 
2.27.0