Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Mon, 13 Jul 2020 15:10:06 +0800
From:   Shawn Guo <shawnguo@kernel.org>
To:     Ran Wang <ran.wang_1@nxp.com>
Cc:     Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
        linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: ls1043a: update USB nodes status to match
 board config
Message-ID: <20200713071005.GJ12113@dragon>
References: <20200707074031.13943-1-ran.wang_1@nxp.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20200707074031.13943-1-ran.wang_1@nxp.com>
User-Agent: Mutt/1.9.4 (2018-02-28)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Tue, Jul 07, 2020 at 03:40:31PM +0800, Ran Wang wrote:
> ls1043a-rdb and ls1043a-qds board’s default HW config (such as
> pin mux selection) would not enable some USB controllers’
> data path, which causing over-current detected on those
> controllers. This will hit the case of ‘xhci driver prevent bus suspend
> if a root hub port detected over-current condition’, causing system
> failed to be suspended. So disable them in device tree to resolve this
> issue.
> 
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>

Applied, thanks.