Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Kevin Hilman <khilman@baylibre.com>
To:     linux-amlogic@lists.infradead.org,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc:     linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/3] ARM: dts: use the SDHC MMC controller for eMMC
Date:   Mon, 13 Jul 2020 12:03:29 -0700
Message-Id: <159466696386.22745.6301055317421562776.b4-ty@baylibre.com>
In-Reply-To: <20200620163654.37207-1-martin.blumenstingl@googlemail.com>
References: <20200620163654.37207-1-martin.blumenstingl@googlemail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Sat, 20 Jun 2020 18:36:51 +0200, Martin Blumenstingl wrote:
> Amlogic Meson6/8/8b/8m2 SoCs have two built-in MMC controllers:
> - SDIO (which is supported on mainline for a long time now but is
>   limited to ~40MHz bus frequency)
> - SDHC (which supports up to HS-200 modes at ~100MHz bus frequency but
>   for which we didn't have a driver)
> 
> Boards with NAND flash will now be able to use the SDIO controller for
> SDIO based wifi cards and the SDHC controller for the SD card slot.
> Boards with eMMC, SD card and SDIO wifi can only use two out of three
> MMC based devices for now until the MMC core and Meson SDIO driver gain
> support for multiple "mmc-slots" per controller.
> 
> [...]

Applied, thanks!

[1/3] ARM: dts: meson: add the SDHC MMC controller
      commit: 73106f75bf9498ff5d50f1052ad3cf03730d806d
[2/3] ARM: dts: meson8b: ec100: enable the SDHC controller
      commit: 73501b890a6f15460613878b463319d0e0cd1632
[3/3] ARM: dts: meson8b: odroidc1: enable the SDHC controller
      commit: d6a3873c7be6d58914ea5584dc7875f2045d6721

Best regards,
-- 
Kevin Hilman <khilman@baylibre.com>