Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To:     linux-amlogic@lists.infradead.org, khilman@baylibre.com
Cc:     linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        narmstrong@baylibre.com,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH v2 3/3] arm64: dts: amlogic: meson-g12: add the Mali OPP table and use DVFS
Date:   Sun, 19 Jul 2020 19:32:13 +0200
Message-Id: <20200719173213.639540-4-martin.blumenstingl@googlemail.com>
In-Reply-To: <20200719173213.639540-1-martin.blumenstingl@googlemail.com>
References: <20200719173213.639540-1-martin.blumenstingl@googlemail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Add the OPP table for the Mali Bifrost GPU and drop the hardcoded
initial clock configuration. This enables GPU DVFS and thus saves power
when the GPU is not in use while still being able switch to a higher
clock on demand.

Set the GP0_PLL clock to 744MHz (which is the only frequency which
cannot be derived from the FCLK dividers) as the clock driver avoids
setting the parent clock rates so the HIFI PLL clock isn't changed (as
that's reserved for audio).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 .../boot/dts/amlogic/meson-g12-common.dtsi    | 49 +++++++++++++------
 1 file changed, 34 insertions(+), 15 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 41805f2ed8fc..1e83ec5b8c91 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -52,6 +52,39 @@ efuse: efuse {
 		secure-monitor = <&sm>;
 	};
 
+	gpu_opp_table: gpu-opp-table {
+		compatible = "operating-points-v2";
+
+		opp-124999998 {
+			opp-hz = /bits/ 64 <124999998>;
+			opp-microvolt = <800000>;
+		};
+		opp-249999996 {
+			opp-hz = /bits/ 64 <249999996>;
+			opp-microvolt = <800000>;
+		};
+		opp-285714281 {
+			opp-hz = /bits/ 64 <285714281>;
+			opp-microvolt = <800000>;
+		};
+		opp-399999994 {
+			opp-hz = /bits/ 64 <399999994>;
+			opp-microvolt = <800000>;
+		};
+		opp-499999992 {
+			opp-hz = /bits/ 64 <499999992>;
+			opp-microvolt = <800000>;
+		};
+		opp-666666656 {
+			opp-hz = /bits/ 64 <666666656>;
+			opp-microvolt = <800000>;
+		};
+		opp-799999987 {
+			opp-hz = /bits/ 64 <799999987>;
+			opp-microvolt = <800000>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -2362,21 +2395,7 @@ mali: gpu@ffe40000 {
 			interrupt-names = "job", "mmu", "gpu";
 			clocks = <&clkc CLKID_MALI>;
 			resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
-
-			/*
-			 * Mali clocking is provided by two identical clock paths
-			 * MALI_0 and MALI_1 muxed to a single clock by a glitch
-			 * free mux to safely change frequency while running.
-			 */
-			assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
-					  <&clkc CLKID_MALI_0>,
-					  <&clkc CLKID_MALI>; /* Glitch free mux */
-			assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>,
-						 <0>, /* Do Nothing */
-						 <&clkc CLKID_MALI_0>;
-			assigned-clock-rates = <0>, /* Do Nothing */
-					       <800000000>,
-					       <0>; /* Do Nothing */
+			operating-points-v2 = <&gpu_opp_table>;
 			#cooling-cells = <2>;
 		};
 	};
-- 
2.27.0