Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Al Cooper <alcooperx@gmail.com>
To:     linux-kernel@vger.kernel.org
Cc:     Al Cooper <alcooperx@gmail.com>, devicetree@vger.kernel.org,
        Felipe Balbi <balbi@kernel.org>,
        Florian Fainelli <florian.fainelli@broadcom.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        linux-usb@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
        Sasi Kumar <sasi.kumar@broadcom.com>
Subject: [PATCH v2 1/7] dt-bindings: usb: bdc: Update compatible strings
Date:   Tue, 21 Jul 2020 10:43:20 -0400
Message-Id: <20200721144326.7976-2-alcooperx@gmail.com>
In-Reply-To: <20200721144326.7976-1-alcooperx@gmail.com>
References: <20200721144326.7976-1-alcooperx@gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Remove "brcm,bdc-v0.16" because it was never used on any system.
Add "brcm,bdc-udc-v2" which exists for any STB system with BDC.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
---
 Documentation/devicetree/bindings/usb/brcm,bdc.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.txt b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
index 63e63af3bf59..c9f52b97cef1 100644
--- a/Documentation/devicetree/bindings/usb/brcm,bdc.txt
+++ b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
@@ -4,7 +4,7 @@ Broadcom USB Device Controller (BDC)
 Required properties:
 
 - compatible: must be one of:
-                "brcm,bdc-v0.16"
+                "brcm,bdc-udc-v2"
                 "brcm,bdc"
 - reg: the base register address and length
 - interrupts: the interrupt line for this controller
@@ -21,7 +21,7 @@ On Broadcom STB platforms, these properties are required:
 Example:
 
         bdc@f0b02000 {
-                compatible = "brcm,bdc-v0.16";
+                compatible = "brcm,bdc-udc-v2";
                 reg = <0xf0b02000 0xfc4>;
                 interrupts = <0x0 0x60 0x0>;
                 phys = <&usbphy_0 0x0>;
-- 
2.17.1