Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: xEF04k7vHhvCQJV1WadxNAnGZELsioh6TrgotSN7PbFIyl17MUUTbE0emBqZhi1kixXbzffLYy
 5GxWLBl7AHsr2TxOTEkcTmJ62HTO2uWRTWr2EDETJ/FWRSoWmqNh2h+taC+IOTmaPiiWmovVll
 wsrdXJdBeYj0jTGpxH0Np2I8O3LQlD6BwgBI6rECtdq9O+AelMhCNnsea554Pb2b01JZPLxxFk
 CQw/8XslEZh4jVOf5oAHyNEbGqj892rMJgFwnXfavEV1q8nwnTK453EjfhD7qd5BOJ1LsAx3/b
 /64=
References: <20200618141326.25723-1-lars.povlsen@microchip.com> <20200618141326.25723-3-lars.povlsen@microchip.com> <aee90bbf-f0ff-b0cb-b10a-9a2f3bb6acca@intel.com>
From:   Lars Povlsen <lars.povlsen@microchip.com>
To:     Adrian Hunter <adrian.hunter@intel.com>
CC:     Lars Povlsen <lars.povlsen@microchip.com>,
        Ulf Hansson <ulf.hansson@linaro.org>,
        SoC Team <soc@kernel.org>,
        "Microchip Linux Driver Support" <UNGLinuxDriver@microchip.com>,
        <linux-mmc@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>,
        Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: Re: [PATCH v4 2/3] sdhci: sparx5: Add Sparx5 SoC eMMC driver
In-Reply-To: <aee90bbf-f0ff-b0cb-b10a-9a2f3bb6acca@intel.com>
Date:   Wed, 22 Jul 2020 13:54:31 +0200
Message-ID: <87wo2vkbns.fsf@soft-dev15.microsemi.net>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk


Adrian Hunter writes:

> On 18/06/20 5:13 pm, Lars Povlsen wrote:
>> This adds the eMMC driver for the Sparx5 SoC. It is based upon the
>> designware IP, but requires some extra initialization and quirks.
>>
>> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
>
> Acked-by: Adrian Hunter <adrian.hunter@intel.com>
>

Adrian,

Thanks for the ack. I was expecting to see this in linux-next, anything
holding it back?

pinctrl and hwmon drivers have been merged.

Thanks,

---Lars

>> ---
>>  drivers/mmc/host/Kconfig           |  13 ++
>>  drivers/mmc/host/Makefile          |   1 +
>>  drivers/mmc/host/sdhci-of-sparx5.c | 269 +++++++++++++++++++++++++++++
>>  3 files changed, 283 insertions(+)
>>  create mode 100644 drivers/mmc/host/sdhci-of-sparx5.c
>>
>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
>> index 3b706af35ec31..a3bad4b4ed7ea 100644
>> --- a/drivers/mmc/host/Kconfig
>> +++ b/drivers/mmc/host/Kconfig
>> @@ -213,6 +213,19 @@ config MMC_SDHCI_OF_DWCMSHC
>>         If you have a controller with this interface, say Y or M here.
>>         If unsure, say N.
>>
>> +config MMC_SDHCI_OF_SPARX5
>> +     tristate "SDHCI OF support for the MCHP Sparx5 SoC"
>> +     depends on MMC_SDHCI_PLTFM
>> +     depends on ARCH_SPARX5
>> +     select MMC_SDHCI_IO_ACCESSORS
>> +     help
>> +       This selects the Secure Digital Host Controller Interface (SDHCI)
>> +       found in the MCHP Sparx5 SoC.
>> +
>> +       If you have a Sparx5 SoC with this interface, say Y or M here.
>> +
>> +       If unsure, say N.
>> +
>>  config MMC_SDHCI_CADENCE
>>       tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller"
>>       depends on MMC_SDHCI_PLTFM
>> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
>> index 4d5bcb0144a0a..451c25fc2c692 100644
>> --- a/drivers/mmc/host/Makefile
>> +++ b/drivers/mmc/host/Makefile
>> @@ -94,6 +94,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_AT91)             += sdhci-of-at91.o
>>  obj-$(CONFIG_MMC_SDHCI_OF_ESDHC)     += sdhci-of-esdhc.o
>>  obj-$(CONFIG_MMC_SDHCI_OF_HLWD)              += sdhci-of-hlwd.o
>>  obj-$(CONFIG_MMC_SDHCI_OF_DWCMSHC)   += sdhci-of-dwcmshc.o
>> +obj-$(CONFIG_MMC_SDHCI_OF_SPARX5)    += sdhci-of-sparx5.o
>>  obj-$(CONFIG_MMC_SDHCI_BCM_KONA)     += sdhci-bcm-kona.o
>>  obj-$(CONFIG_MMC_SDHCI_IPROC)                += sdhci-iproc.o
>>  obj-$(CONFIG_MMC_SDHCI_MSM)          += sdhci-msm.o
>> diff --git a/drivers/mmc/host/sdhci-of-sparx5.c b/drivers/mmc/host/sdhci-of-sparx5.c
>> new file mode 100644
>> index 0000000000000..2b262c12e5530
>> --- /dev/null
>> +++ b/drivers/mmc/host/sdhci-of-sparx5.c
>> @@ -0,0 +1,269 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +/*
>> + * drivers/mmc/host/sdhci-of-sparx5.c
>> + *
>> + * MCHP Sparx5 SoC Secure Digital Host Controller Interface.
>> + *
>> + * Copyright (c) 2019 Microchip Inc.
>> + *
>> + * Author: Lars Povlsen <lars.povlsen@microchip.com>
>> + */
>> +
>> +#include <linux/sizes.h>
>> +#include <linux/delay.h>
>> +#include <linux/module.h>
>> +#include <linux/regmap.h>
>> +#include <linux/of_device.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/dma-mapping.h>
>> +
>> +#include "sdhci-pltfm.h"
>> +
>> +#define CPU_REGS_GENERAL_CTRL        (0x22 * 4)
>> +#define  MSHC_DLY_CC_MASK    GENMASK(16, 13)
>> +#define  MSHC_DLY_CC_SHIFT   13
>> +#define  MSHC_DLY_CC_MAX     15
>> +
>> +#define CPU_REGS_PROC_CTRL   (0x2C * 4)
>> +#define  ACP_CACHE_FORCE_ENA BIT(4)
>> +#define  ACP_AWCACHE         BIT(3)
>> +#define  ACP_ARCACHE         BIT(2)
>> +#define  ACP_CACHE_MASK              (ACP_CACHE_FORCE_ENA|ACP_AWCACHE|ACP_ARCACHE)
>> +
>> +#define MSHC2_VERSION                        0x500   /* Off 0x140, reg 0x0 */
>> +#define MSHC2_TYPE                   0x504   /* Off 0x140, reg 0x1 */
>> +#define MSHC2_EMMC_CTRL                      0x52c   /* Off 0x140, reg 0xB */
>> +#define  MSHC2_EMMC_CTRL_EMMC_RST_N  BIT(2)
>> +#define  MSHC2_EMMC_CTRL_IS_EMMC     BIT(0)
>> +
>> +struct sdhci_sparx5_data {
>> +     struct sdhci_host *host;
>> +     struct regmap *cpu_ctrl;
>> +     int delay_clock;
>> +};
>> +
>> +#define BOUNDARY_OK(addr, len) \
>> +     ((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1)))
>> +
>> +/*
>> + * If DMA addr spans 128MB boundary, we split the DMA transfer into two
>> + * so that each DMA transfer doesn't exceed the boundary.
>> + */
>> +static void sdhci_sparx5_adma_write_desc(struct sdhci_host *host, void **desc,
>> +                                       dma_addr_t addr, int len,
>> +                                       unsigned int cmd)
>> +{
>> +     int tmplen, offset;
>> +
>> +     if (likely(!len || BOUNDARY_OK(addr, len))) {
>> +             sdhci_adma_write_desc(host, desc, addr, len, cmd);
>> +             return;
>> +     }
>> +
>> +     pr_debug("%s: write_desc: splitting dma len %d, offset 0x%0llx\n",
>> +              mmc_hostname(host->mmc), len, addr);
>> +
>> +     offset = addr & (SZ_128M - 1);
>> +     tmplen = SZ_128M - offset;
>> +     sdhci_adma_write_desc(host, desc, addr, tmplen, cmd);
>> +
>> +     addr += tmplen;
>> +     len -= tmplen;
>> +     sdhci_adma_write_desc(host, desc, addr, len, cmd);
>> +}
>> +
>> +static void sparx5_set_cacheable(struct sdhci_host *host, u32 value)
>> +{
>> +     struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> +     struct sdhci_sparx5_data *sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
>> +
>> +     pr_debug("%s: Set Cacheable = 0x%x\n", mmc_hostname(host->mmc), value);
>> +
>> +     /* Update ACP caching attributes in HW */
>> +     regmap_update_bits(sdhci_sparx5->cpu_ctrl,
>> +                        CPU_REGS_PROC_CTRL, ACP_CACHE_MASK, value);
>> +}
>> +
>> +static void sparx5_set_delay(struct sdhci_host *host, u8 value)
>> +{
>> +     struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> +     struct sdhci_sparx5_data *sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
>> +
>> +     pr_debug("%s: Set DLY_CC = %u\n", mmc_hostname(host->mmc), value);
>> +
>> +     /* Update DLY_CC in HW */
>> +     regmap_update_bits(sdhci_sparx5->cpu_ctrl,
>> +                        CPU_REGS_GENERAL_CTRL,
>> +                        MSHC_DLY_CC_MASK,
>> +                        (value << MSHC_DLY_CC_SHIFT));
>> +}
>> +
>> +static void sdhci_sparx5_set_emmc(struct sdhci_host *host)
>> +{
>> +     if (!mmc_card_is_removable(host->mmc)) {
>> +             u8 value;
>> +
>> +             value = sdhci_readb(host, MSHC2_EMMC_CTRL);
>> +             if (!(value & MSHC2_EMMC_CTRL_IS_EMMC)) {
>> +                     value |= MSHC2_EMMC_CTRL_IS_EMMC;
>> +                     pr_debug("%s: Set EMMC_CTRL: 0x%08x\n",
>> +                              mmc_hostname(host->mmc), value);
>> +                     sdhci_writeb(host, value, MSHC2_EMMC_CTRL);
>> +             }
>> +     }
>> +}
>> +
>> +static void sdhci_sparx5_reset_emmc(struct sdhci_host *host)
>> +{
>> +     u8 value;
>> +
>> +     pr_debug("%s: Toggle EMMC_CTRL.EMMC_RST_N\n", mmc_hostname(host->mmc));
>> +     value = sdhci_readb(host, MSHC2_EMMC_CTRL) &
>> +             ~MSHC2_EMMC_CTRL_EMMC_RST_N;
>> +     sdhci_writeb(host, value, MSHC2_EMMC_CTRL);
>> +     /* For eMMC, minimum is 1us but give it 10us for good measure */
>> +     usleep_range(10, 20);
>> +     sdhci_writeb(host, value | MSHC2_EMMC_CTRL_EMMC_RST_N,
>> +                  MSHC2_EMMC_CTRL);
>> +     /* For eMMC, minimum is 200us but give it 300us for good measure */
>> +     usleep_range(300, 400);
>> +}
>> +
>> +static void sdhci_sparx5_reset(struct sdhci_host *host, u8 mask)
>> +{
>> +     pr_debug("%s: *** RESET: mask %d\n", mmc_hostname(host->mmc), mask);
>> +
>> +     sdhci_reset(host, mask);
>> +
>> +     /* Be sure CARD_IS_EMMC stays set */
>> +     sdhci_sparx5_set_emmc(host);
>> +}
>> +
>> +static const struct sdhci_ops sdhci_sparx5_ops = {
>> +     .set_clock              = sdhci_set_clock,
>> +     .set_bus_width          = sdhci_set_bus_width,
>> +     .set_uhs_signaling      = sdhci_set_uhs_signaling,
>> +     .get_max_clock          = sdhci_pltfm_clk_get_max_clock,
>> +     .reset                  = sdhci_sparx5_reset,
>> +     .adma_write_desc        = sdhci_sparx5_adma_write_desc,
>> +};
>> +
>> +static const struct sdhci_pltfm_data sdhci_sparx5_pdata = {
>> +     .quirks  = 0,
>> +     .quirks2 = SDHCI_QUIRK2_HOST_NO_CMD23 | /* Controller issue */
>> +                SDHCI_QUIRK2_NO_1_8_V, /* No sdr104, ddr50, etc */
>> +     .ops = &sdhci_sparx5_ops,
>> +};
>> +
>> +int sdhci_sparx5_probe(struct platform_device *pdev)
>> +{
>> +     int ret;
>> +     const char *syscon = "microchip,sparx5-cpu-syscon";
>> +     struct sdhci_host *host;
>> +     struct sdhci_pltfm_host *pltfm_host;
>> +     struct sdhci_sparx5_data *sdhci_sparx5;
>> +     struct device_node *np = pdev->dev.of_node;
>> +     u32 value;
>> +     u32 extra;
>> +
>> +     host = sdhci_pltfm_init(pdev, &sdhci_sparx5_pdata,
>> +                             sizeof(*sdhci_sparx5));
>> +
>> +     if (IS_ERR(host))
>> +             return PTR_ERR(host);
>> +
>> +     /*
>> +      * extra adma table cnt for cross 128M boundary handling.
>> +      */
>> +     extra = DIV_ROUND_UP_ULL(dma_get_required_mask(&pdev->dev), SZ_128M);
>> +     if (extra > SDHCI_MAX_SEGS)
>> +             extra = SDHCI_MAX_SEGS;
>> +     host->adma_table_cnt += extra;
>> +
>> +     pltfm_host = sdhci_priv(host);
>> +     sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
>> +     sdhci_sparx5->host = host;
>> +
>> +     pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
>> +     if (IS_ERR(pltfm_host->clk)) {
>> +             ret = PTR_ERR(pltfm_host->clk);
>> +             dev_err(&pdev->dev, "failed to get core clk: %d\n", ret);
>> +             goto free_pltfm;
>> +     }
>> +     ret = clk_prepare_enable(pltfm_host->clk);
>> +     if (ret)
>> +             goto free_pltfm;
>> +
>> +     if (!of_property_read_u32(np, "microchip,clock-delay", &value) &&
>> +         (value > 0 && value <= MSHC_DLY_CC_MAX))
>> +             sdhci_sparx5->delay_clock = value;
>> +
>> +     sdhci_get_of_property(pdev);
>> +
>> +     ret = mmc_of_parse(host->mmc);
>> +     if (ret)
>> +             goto err_clk;
>> +
>> +     sdhci_sparx5->cpu_ctrl = syscon_regmap_lookup_by_compatible(syscon);
>> +     if (IS_ERR(sdhci_sparx5->cpu_ctrl)) {
>> +             dev_err(&pdev->dev, "No CPU syscon regmap !\n");
>> +             ret = PTR_ERR(sdhci_sparx5->cpu_ctrl);
>> +             goto err_clk;
>> +     }
>> +
>> +     if (sdhci_sparx5->delay_clock >= 0)
>> +             sparx5_set_delay(host, sdhci_sparx5->delay_clock);
>> +
>> +     if (!mmc_card_is_removable(host->mmc)) {
>> +             /* Do a HW reset of eMMC card */
>> +             sdhci_sparx5_reset_emmc(host);
>> +             /* Update EMMC_CTRL */
>> +             sdhci_sparx5_set_emmc(host);
>> +             /* If eMMC, disable SD and SDIO */
>> +             host->mmc->caps2 |= (MMC_CAP2_NO_SDIO|MMC_CAP2_NO_SD);
>> +     }
>> +
>> +     ret = sdhci_add_host(host);
>> +     if (ret)
>> +             goto err_clk;
>> +
>> +     /* Set AXI bus master to use un-cached access (for DMA) */
>> +     if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA) &&
>> +         IS_ENABLED(CONFIG_DMA_DECLARE_COHERENT))
>> +             sparx5_set_cacheable(host, ACP_CACHE_FORCE_ENA);
>> +
>> +     pr_debug("%s: SDHC version: 0x%08x\n",
>> +              mmc_hostname(host->mmc), sdhci_readl(host, MSHC2_VERSION));
>> +     pr_debug("%s: SDHC type:    0x%08x\n",
>> +              mmc_hostname(host->mmc), sdhci_readl(host, MSHC2_TYPE));
>> +
>> +     return ret;
>> +
>> +err_clk:
>> +     clk_disable_unprepare(pltfm_host->clk);
>> +free_pltfm:
>> +     sdhci_pltfm_free(pdev);
>> +     return ret;
>> +}
>> +
>> +static const struct of_device_id sdhci_sparx5_of_match[] = {
>> +     { .compatible = "microchip,dw-sparx5-sdhci" },
>> +     { }
>> +};
>> +MODULE_DEVICE_TABLE(of, sdhci_sparx5_of_match);
>> +
>> +static struct platform_driver sdhci_sparx5_driver = {
>> +     .driver = {
>> +             .name = "sdhci-sparx5",
>> +             .of_match_table = sdhci_sparx5_of_match,
>> +             .pm = &sdhci_pltfm_pmops,
>> +     },
>> +     .probe = sdhci_sparx5_probe,
>> +     .remove = sdhci_pltfm_unregister,
>> +};
>> +
>> +module_platform_driver(sdhci_sparx5_driver);
>> +
>> +MODULE_DESCRIPTION("Sparx5 SDHCI OF driver");
>> +MODULE_AUTHOR("Lars Povlsen <lars.povlsen@microchip.com>");
>> +MODULE_LICENSE("GPL v2");
>>

-- 
Lars Povlsen,
Microchip