Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20200724214221.28125-1-grygorii.strashko@ti.com> <a91d2bad-b794-fe07-679a-e5096aa5ace8@oracle.com>
In-Reply-To: <a91d2bad-b794-fe07-679a-e5096aa5ace8@oracle.com>
From:   Arnd Bergmann <arnd@arndb.de>
Date:   Sat, 25 Jul 2020 09:57:41 +0200
Message-ID: <CAK8P3a3N70PbotC18K-SG9+XgfApHNZyCYvUgOyfrxrP55zSEw@mail.gmail.com>
Subject: Re: [RESEND PATCH] ARM: dts: keystone-k2g-evm: fix rgmii phy-mode for
 ksz9031 phy
To:     "santosh.shilimkar@oracle.com" <santosh.shilimkar@oracle.com>
Cc:     "arm@kernel.org" <arm@kernel.org>, Olof Johansson <olof@lixom.net>,
        Grygorii Strashko <grygorii.strashko@ti.com>,
        Murali Karicheri <m-karicheri2@ti.com>,
        Santosh Shilimkar <ssantosh@kernel.org>,
        Sekhar Nori <nsekhar@ti.com>,
        Linux ARM <linux-arm-kernel@lists.infradead.org>,
        "David S . Miller" <davem@davemloft.net>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        Networking <netdev@vger.kernel.org>,
        DTML <devicetree@vger.kernel.org>,
        Oleksij Rempel <o.rempel@pengutronix.de>,
        Andrew Lunn <andrew@lunn.ch>,
        Philippe Schenker <philippe.schenker@toradex.com>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Fri, Jul 24, 2020 at 11:57 PM santosh.shilimkar@oracle.com
<santosh.shilimkar@oracle.com> wrote:
> On 7/24/20 2:42 PM, Grygorii Strashko wrote:
> > Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the
> > KSZ9031 PHY") the networking is broken on keystone-k2g-evm board.
> >
> > The above board have phy-mode = "rgmii-id" and it is worked before because
> > KSZ9031 PHY started with default RGMII internal delays configuration (TX
> > off, RX on 1.2 ns) and MAC provided TX delay by default.
> > After above commit, the KSZ9031 PHY starts handling phy mode properly and
> > enables both RX and TX delays, as result networking is become broken.
> >
> > Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous
> > behavior.
> >
> > Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> > Cc: Andrew Lunn <andrew@lunn.ch>
> > Cc: Philippe Schenker <philippe.schenker@toradex.com>
> > Fixes: bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
> > Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> > ---
> > Fix for one more broken TI board with KSZ9031 PHY.
> Can you please apply this patch to your v5.8 fixes branch and send it
> upstream ? Without the fix K2G EVM board is broken with v5.8.
>
> Am hoping you can pick this up with pull request since it just one
> patch.

I've applied it now, but would point out that it's generally better if you could
forward the patch to soc@kernel.org with your Signed-off-by if you come
across a similar patch again. That way it ends up in patchwork, and we
are more likely to pick it up quickly.

       Arnd