Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Dongdong Yang <contribute.kernel@gmail.com>
To:     gregkh@linuxfoundation.org, rjw@rjwysocki.net,
        viresh.kumar@linaro.org, mingo@redhat.com, peterz@infradead.org,
        juri.lelli@redhat.com, vincent.guittot@linaro.org,
        dietmar.eggemann@arm.com, rostedt@goodmis.org, bsegall@google.com,
        mgorman@suse.de
Cc:     linux-kernel@vger.kernel.org, devel@driverdev.osuosl.org,
        linux-pm@vger.kernel.org, yangdongdong@xiaomi.com,
        tanggeliang@xiaomi.com, taojun@xiaomi.com, huangqiwu@xiaomi.com,
        rocking@linux.alibaba.com, fengwei@xiaomi.com,
        zhangguoquan@xiaomi.com, gulinghua@xiaomi.com, duhui@xiaomi.com
Subject: [PATCH] sched: Provide USF for the portable equipment.
Date:   Thu, 30 Jul 2020 21:35:43 +0800
Message-Id: <1596116273-2290-1-git-send-email-contribute.kernel@gmail.com>
In-Reply-To: <cover.1596101307.git.yangdongdong@xiaomi.com>
References: <cover.1596101307.git.yangdongdong@xiaomi.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: Dongdong Yang <yangdongdong@xiaomi.com>

The power consumption and UI response are more cared
for by the portable equipment users. USF(User Sensitive
Feedback factor) auxiliary cpufreq governor is
providing more utils adjustment settings to a high
level by scenario identification.

From the view of portable equipment, screen off status
usually stands for no request from the user, however,
the kernel is still expected to notify the user
in time on modem, network or powerkey events occur.
In some scenarios, such as listening to music,
low power processors, such as DSP, take more actions
and CPU load requirements cut down.  It would bring
more power consumption benefit if high level have
interfaces to adjust utils according to the current
scenario and load.

In addition, the portable equipment user usually heavy
interact with devices by touch, and other peripherals.
The boost preemptive counts are marking the load
requirement urgent, vice versa. If such feedback
factor could be set to high level according to the
scenario, it would contribute to the power consumption
and UI response.

If no USF sysfs inode is set, and no screen on or
off event, adjust_task_pred_demand shall not be invoked.
Once sched_usf_up_l0_r/down_r/non_ux_r be set,
adjust_task_pred_demand_impl shall be called back
to update settings according to high level scenario
identification.

We can get about 17% mean power consumption save
at listening to music with speaker on "screen
off" scenario, as below statistical data from 7766
XiaoMi devices for two weeks with
sched_usf_non_ux_r be set:

        day1         day2         day3         day4
count   7766.000000  7766.000000  7766.000000  7766.000000
mean    88.035525    85.500282    83.829305    86.054997
std     111.049980   108.258834   107.562583   108.558240
min     0.099000     0.037000     0.067000     0.045000
25%     34.765500    34.021750    34.101500    34.423000
50%     54.950000    55.286500    54.189500    54.248500
75%     95.954000    93.942000    91.738000    94.0592500
80%     114.675000   107.430000   106.378000   108.673000
85%     137.851000   129.511000   127.156500   131.750750
90%     179.669000   170.208500   164.027000   172.348000
95%     272.395000   257.845500   247.750500   263.275750
98%     399.034500   412.170400   391.484000   402.835600

        day5         day6        day7         day8
count   7766.000000  7766.00000  7766.000000  7766.000000
mean    82.532677    79.21923    77.611380    81.075081
std     104.870079   101.34819   103.140037   97.506221
min     0.051000     0.02900     0.007000     0.068000
25%     32.873000    33.44400    31.965500    33.863500
50%     52.180500    51.56550    50.806500    53.080000
75%     90.905750    86.82625    83.859250    89.973000
80%     105.455000   99.64700    97.271000    104.225000
85%     128.300000   118.47825   116.570250   126.648250
90%     166.647500   149.18000   150.649500   161.087000
95%     247.208500   224.36050   226.380000   245.291250
98%     393.002000   347.92060   369.791800   378.778600

        day9         day10        day11        day12
count   7766.000000  7766.000000  7766.000000  7766.000000
mean    79.989170    83.859417    78.032930    77.060542
std     104.226122   108.893043   102.561715   99.844276
min     0.118000     0.017000     0.028000     0.039000
25%     32.056250    33.454500    31.176250    30.897750
50%     51.506000    54.056000    48.969500    49.069000
75%     88.513500    92.953500    83.506750    84.096000
80%     102.876000   107.845000   97.717000    98.073000
85%     124.363000   128.288000   118.366500   116.869250
90%     160.557000   167.084000   154.342500   148.187500
95%     231.149000   242.925750   236.759000   228.131250
98%     367.206600   388.619100   385.269100   376.541600

        day13        day14
count   7766.000000  7766.000000
mean    75.528036    73.702878
std     90.750594    86.796016
min     0.066000     0.054000
25%     31.170500    31.608500
50%     48.758500    49.215000
75%     84.522750    83.053000
80%     97.879000    94.875000
85%     116.680250   113.573750
90%     149.083500   144.089500
95%     226.177750   211.488750
98%     347.011100   331.317100

Signed-off-by: Dongdong Yang <yangdongdong@xiaomi.com>
Signed-off-by: Jun Tao <taojun@xiaomi.com>
Signed-off-by: Qiwu Huang <huangqiwu@xiaomi.com>
Signed-off-by: Geliang Tang <tanggeliang@xiaomi.com>
Signed-off-by: Peng Wang <rocking@linux.alibaba.com>
---
 drivers/staging/Kconfig          |   2 +
 drivers/staging/Makefile         |   1 +
 drivers/staging/fbsched/Kconfig  |  10 ++
 drivers/staging/fbsched/Makefile |   2 +
 drivers/staging/fbsched/usf.c    | 351 +++++++++++++++++++++++++++++++++++++++
 kernel/sched/cpufreq_schedutil.c |  11 +-
 6 files changed, 376 insertions(+), 1 deletion(-)
 create mode 100644 drivers/staging/fbsched/Kconfig
 create mode 100644 drivers/staging/fbsched/Makefile
 create mode 100644 drivers/staging/fbsched/usf.c

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 4ec5528..05b231e 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -120,4 +120,6 @@ source "drivers/staging/qlge/Kconfig"
 
 source "drivers/staging/wfx/Kconfig"
 
+source "drivers/staging/fbsched/Kconfig"
+
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 4d34198..e016ec6 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -50,3 +50,4 @@ obj-$(CONFIG_FIELDBUS_DEV)     += fieldbus/
 obj-$(CONFIG_KPC2000)		+= kpc2000/
 obj-$(CONFIG_QLGE)		+= qlge/
 obj-$(CONFIG_WFX)		+= wfx/
+obj-$(CONFIG_SCHED_USF)		+= fbsched/
diff --git a/drivers/staging/fbsched/Kconfig b/drivers/staging/fbsched/Kconfig
new file mode 100644
index 0000000..954b6af
--- /dev/null
+++ b/drivers/staging/fbsched/Kconfig
@@ -0,0 +1,10 @@
+config SCHED_USF
+	bool "User Sensitive Factors for Scheduler"
+	depends on CPU_FREQ_GOV_SCHEDUTIL && FB
+	help
+	  Select this option to enable the adjustment on the cpufreq with
+	  the user sensitive factors on schedule. It is special for portable
+	  equipment which more power care and quick response requirement on
+	  screen on.
+
+	  If unsure, say N.
diff --git a/drivers/staging/fbsched/Makefile b/drivers/staging/fbsched/Makefile
new file mode 100644
index 0000000..f56aa6c
--- /dev/null
+++ b/drivers/staging/fbsched/Makefile
@@ -0,0 +1,2 @@
+LINUXINCLUDE += -include $(srctree)/kernel/sched/sched.h
+obj-$(CONFIG_SCHED_USF) += usf.o
diff --git a/drivers/staging/fbsched/usf.c b/drivers/staging/fbsched/usf.c
new file mode 100644
index 0000000..8582992
--- /dev/null
+++ b/drivers/staging/fbsched/usf.c
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 XiaoMi Inc.
+ * Author: Yang Dongdong <yangdongdong@xiaomi.com>
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See http://www.gnu.org/licenses/gpl-2.0.html for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/kthread.h>
+#include <linux/cpu.h>
+#include <linux/sysfs.h>
+#include <linux/kthread.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/kallsyms.h>
+#include <linux/debugfs.h>
+#include <linux/fb.h>
+#include <linux/notifier.h>
+
+#define BOOST_MIN_V -100
+#define BOOST_MAX_V 100
+#define LEVEL_TOP 3
+
+#define USF_TAG	"[usf_sched]"
+
+extern void (*adjust_task_pred_demand)(int cpuid,
+				       unsigned long *util,
+				       struct rq *rq);
+DEFINE_PER_CPU(unsigned long[PID_MAX_LIMIT], task_hist_nivcsw);
+
+static struct {
+	bool is_sched_usf_enabled;
+	int enable_debug;
+	int is_screen_on;
+	struct kobject *kobj;
+	struct dentry *debugfs_entry;
+	int sysctl_sched_usf_up_l0;
+	int sysctl_sched_usf_down;
+	int sysctl_sched_usf_non_ux;
+	int usf_up_l0;
+	int usf_down;
+	int usf_non_ux;
+} usf_vdev;
+
+static void adjust_task_pred_demand_impl(int cpuid,
+					 unsigned long *util,
+					 struct rq *rq)
+{
+	/* sysctl_sched_latency/sysctl_sched_min_granularity */
+	u32 bl_sw_num = 3;
+
+	if (!usf_vdev.is_sched_usf_enabled || !rq || !rq->curr)
+		return;
+
+	if (usf_vdev.is_screen_on) {
+		if (rq->curr->nivcsw >
+		    (per_cpu(task_hist_nivcsw, cpuid)[rq->curr->pid]
+		     + bl_sw_num + 1)) {
+			(*util) += (*util) >> usf_vdev.usf_up_l0;
+		} else if (rq->curr->nivcsw <
+			   (per_cpu(task_hist_nivcsw, cpuid)[rq->curr->pid]
+			    + bl_sw_num - 1) && (rq->nr_running < bl_sw_num)) {
+			(*util) >>= usf_vdev.usf_down;
+		}
+		per_cpu(task_hist_nivcsw, cpuid)[rq->curr->pid] =
+		    rq->curr->nivcsw;
+	} else if (rq->curr->mm) {
+		(*util) >>= usf_vdev.usf_non_ux;
+	}
+
+	if (unlikely(usf_vdev.enable_debug))
+		trace_printk
+		    ("%s: cpu_id=%d non_ux=%d usf_up=%d usf_down=%d util=%lu\n",
+		     USF_TAG, cpuid, usf_vdev.usf_non_ux,
+		     usf_vdev.usf_up_l0, usf_vdev.usf_down, *util);
+}
+
+static int usf_lcd_notifier(struct notifier_block *nb,
+			    unsigned long val, void *data)
+{
+	struct fb_event *evdata = data;
+	unsigned int blank;
+
+	if (!evdata)
+		return 0;
+
+	if (val != FB_EVENT_BLANK)
+		return 0;
+
+	if (evdata->data && val == FB_EVENT_BLANK) {
+		blank = *(int *)(evdata->data);
+
+		switch (blank) {
+		case FB_BLANK_POWERDOWN:
+			usf_vdev.is_screen_on = 0;
+			if (usf_vdev.sysctl_sched_usf_non_ux != 0)
+				adjust_task_pred_demand =
+				    &adjust_task_pred_demand_impl;
+			else
+				adjust_task_pred_demand = NULL;
+
+			break;
+
+		case FB_BLANK_UNBLANK:
+			usf_vdev.is_screen_on = 1;
+			if (usf_vdev.sysctl_sched_usf_up_l0 != 0 ||
+			    usf_vdev.sysctl_sched_usf_down != 0)
+				adjust_task_pred_demand =
+				    &adjust_task_pred_demand_impl;
+			else
+				adjust_task_pred_demand = NULL;
+			break;
+		default:
+			break;
+		}
+
+		usf_vdev.is_sched_usf_enabled = 1;
+		if (usf_vdev.enable_debug)
+			trace_printk("%s : usf_vdev.is_screen_on:%d\n",
+				     __func__, usf_vdev.is_screen_on);
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block usf_lcd_nb = {
+	.notifier_call = usf_lcd_notifier,
+	.priority = INT_MAX,
+};
+
+static ssize_t store_sched_usf_up_l0_r(struct kobject *kobj,
+				       struct kobj_attribute *attr,
+				       const char *buf, size_t count)
+{
+	int val = 0;
+	int ret;
+
+	ret = kstrtoint(buf, 0, &val);
+	if (ret) {
+		pr_err(USF_TAG "set state fail ret=%d\n", ret);
+		return ret;
+	}
+
+	if ((val >= 0) && (val <= BOOST_MAX_V)) {
+		usf_vdev.sysctl_sched_usf_up_l0 = val;
+		usf_vdev.usf_up_l0 = LEVEL_TOP -
+				DIV_ROUND_UP(val, BOOST_MAX_V / 2);
+	} else {
+		pr_err(USF_TAG "%d should fall into [%d %d]",
+		       val, 0, BOOST_MAX_V);
+	}
+	if ((usf_vdev.sysctl_sched_usf_up_l0 == 0) &&
+	    (usf_vdev.sysctl_sched_usf_down == 0))
+		adjust_task_pred_demand = NULL;
+	else
+		adjust_task_pred_demand = &adjust_task_pred_demand_impl;
+
+	return count;
+}
+
+static ssize_t store_sched_usf_down_r(struct kobject *kobj,
+				      struct kobj_attribute *attr,
+				      const char *buf, size_t count)
+{
+	int val = 0;
+	int ret;
+
+	ret = kstrtoint(buf, 0, &val);
+	if (ret) {
+		pr_err(USF_TAG "set state fail ret=%d\n", ret);
+		return ret;
+	}
+
+	if ((val >= BOOST_MIN_V) && (val <= 0)) {
+		usf_vdev.sysctl_sched_usf_down = val;
+		usf_vdev.usf_down = DIV_ROUND_UP(-val, -BOOST_MIN_V / 2);
+	} else {
+		pr_err(USF_TAG "%d should fall into [%d %d]",
+		       val, BOOST_MIN_V, 0);
+	}
+	if ((usf_vdev.sysctl_sched_usf_up_l0 == 0) &&
+	    (usf_vdev.sysctl_sched_usf_down == 0))
+		adjust_task_pred_demand = NULL;
+	else
+		adjust_task_pred_demand = &adjust_task_pred_demand_impl;
+
+	return count;
+}
+
+static ssize_t store_sched_usf_non_ux_r(struct kobject *kobj,
+					struct kobj_attribute *attr,
+					const char *buf, size_t count)
+{
+	int val = 0;
+	int ret;
+
+	ret = kstrtoint(buf, 0, &val);
+	if (ret) {
+		pr_err(USF_TAG "set state fail ret=%d\n", ret);
+		return ret;
+	}
+
+	if ((val >= BOOST_MIN_V) && (val <= 0)) {
+		usf_vdev.sysctl_sched_usf_non_ux = val;
+		usf_vdev.usf_non_ux = DIV_ROUND_UP(-val, -BOOST_MIN_V / 2);
+	} else {
+		pr_err(USF_TAG "%d should fall into [%d %d]",
+		       val, BOOST_MIN_V, 0);
+	}
+	if (usf_vdev.sysctl_sched_usf_non_ux == 0)
+		adjust_task_pred_demand = NULL;
+	else
+		adjust_task_pred_demand = &adjust_task_pred_demand_impl;
+
+	return count;
+}
+
+#define usf_attr_rw(_name)						\
+static struct kobj_attribute _name =					\
+__ATTR(_name, 0664, show_##_name, store_##_name)
+
+#define usf_show_node(_name, _value)					\
+static ssize_t show_##_name						\
+(struct kobject *kobj, struct kobj_attribute *attr,  char *buf)		\
+{									\
+	unsigned int len = 0;						\
+	unsigned int max_len = 8;					\
+	len +=								\
+	    snprintf(buf + len, max_len - len, "%d",			\
+		     usf_vdev.sysctl_##_value);				\
+	return len;							\
+}
+
+usf_show_node(sched_usf_up_l0_r, sched_usf_up_l0);
+usf_show_node(sched_usf_down_r, sched_usf_down);
+usf_show_node(sched_usf_non_ux_r, sched_usf_non_ux);
+
+usf_attr_rw(sched_usf_up_l0_r);
+usf_attr_rw(sched_usf_down_r);
+usf_attr_rw(sched_usf_non_ux_r);
+
+static struct attribute *sched_attrs[] = {
+	&sched_usf_up_l0_r.attr,
+	&sched_usf_down_r.attr,
+	&sched_usf_non_ux_r.attr,
+	NULL,
+};
+
+static struct attribute_group sched_attr_group = {
+	.attrs = sched_attrs,
+};
+
+static int usf_dbg_get(void *data, u64 *val)
+{
+	*val = (u64)usf_vdev.enable_debug;
+
+	return 0;
+}
+
+static int usf_dbg_set(void *data, u64 val)
+{
+	usf_vdev.enable_debug = !!val;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(usf_dbg_fops, usf_dbg_get,
+			usf_dbg_set, "%llu\n");
+
+static int __init intera_monitor_init(void)
+{
+	int res = -1;
+	struct attribute_group *attr_group;
+
+	res = fb_register_client(&usf_lcd_nb);
+	if (res < 0) {
+		pr_err("Failed to register usf_lcd_nb!\n");
+		return res;
+	}
+
+	/*
+	 * create a sched_usf in cpu_subsys:
+	 * /sys/devices/system/cpu/sched_usf/...
+	 */
+	attr_group = &sched_attr_group;
+	usf_vdev.kobj = kobject_create_and_add("sched_usf",
+					       &cpu_subsys.dev_root->kobj);
+
+	if (!usf_vdev.kobj) {
+		pr_err("Failed to create sched_usf!\n");
+		res = -ENOMEM;
+		goto out;
+	} else {
+		res = sysfs_create_group(usf_vdev.kobj, attr_group);
+		if (res) {
+			kobject_put(usf_vdev.kobj);
+			goto out;
+		} else {
+			kobject_uevent(usf_vdev.kobj, KOBJ_ADD);
+		}
+	}
+
+	usf_vdev.enable_debug = 0;
+	usf_vdev.debugfs_entry = debugfs_create_file("usf_dbg",
+						     0660, NULL, NULL,
+						     &usf_dbg_fops);
+	if (!usf_vdev.debugfs_entry)
+		pr_err("Failed to create usf_dbg!\n");
+
+	usf_vdev.is_sched_usf_enabled = 0;
+	usf_vdev.sysctl_sched_usf_up_l0 = 0;
+	usf_vdev.sysctl_sched_usf_down = 0;
+	usf_vdev.sysctl_sched_usf_non_ux = 0;
+	adjust_task_pred_demand = NULL;
+
+	return 0;
+out:
+	fb_unregister_client(&usf_lcd_nb);
+	return res;
+}
+
+module_init(intera_monitor_init);
+
+static void __exit intera_monitor_exit(void)
+{
+	if (usf_vdev.kobj)
+		kobject_put(usf_vdev.kobj);
+	if (usf_vdev.debugfs_entry)
+		debugfs_remove(usf_vdev.debugfs_entry);
+	fb_unregister_client(&usf_lcd_nb);
+	usf_vdev.is_sched_usf_enabled = 0;
+	usf_vdev.sysctl_sched_usf_up_l0 = 0;
+	usf_vdev.sysctl_sched_usf_down = 0;
+	usf_vdev.sysctl_sched_usf_non_ux = 0;
+	adjust_task_pred_demand = NULL;
+}
+
+module_exit(intera_monitor_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("XiaoMi USF SCHED");
+MODULE_AUTHOR("Yang Dongdong <yangdongdong@xiaomi.com>");
diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
index 7fbaee2..7bc3429 100644
--- a/kernel/sched/cpufreq_schedutil.c
+++ b/kernel/sched/cpufreq_schedutil.c
@@ -289,12 +289,21 @@ unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs,
 	return min(max, util);
 }
 
+#ifdef CONFIG_SCHED_USF
+void (*adjust_task_pred_demand)(int cpuid, unsigned long *util,
+	struct rq *rq) = NULL;
+EXPORT_SYMBOL(adjust_task_pred_demand);
+#endif
+
 static unsigned long sugov_get_util(struct sugov_cpu *sg_cpu)
 {
 	struct rq *rq = cpu_rq(sg_cpu->cpu);
 	unsigned long util = cpu_util_cfs(rq);
 	unsigned long max = arch_scale_cpu_capacity(sg_cpu->cpu);
-
+#ifdef CONFIG_SCHED_USF
+	if (adjust_task_pred_demand)
+		adjust_task_pred_demand(sg_cpu->cpu, &util, rq);
+#endif
 	sg_cpu->max = max;
 	sg_cpu->bw_dl = cpu_bw_dl(rq);
 
-- 
2.7.4