Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Peter Ujfalusi <peter.ujfalusi@ti.com>
To:     <vkoul@kernel.org>
CC:     <dmaengine@vger.kernel.org>, <dan.j.williams@intel.com>,
        <linux-arm-kernel@lists.infradead.org>, <nm@ti.com>,
        <grygorii.strashko@ti.com>, <lokeshvutla@ti.com>, <nsekhar@ti.com>,
        <kishon@ti.com>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 0/2] dmaengine: ti: k3-psil: Add support for j7200
Date:   Mon, 3 Aug 2020 15:57:11 +0300
Message-ID: <20200803125713.17829-1-peter.ujfalusi@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi,

Changes since v1:
- Drop unrelated empty line change in patch 1 (k3-psil.c)

j7200 uses the same DMA hardware but have different set of peripherals, needing
different PSI-L thread map compared to j721e.

To simplify the runtime PSI-L map selection we will switch to use
soc_device_match.

See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1

Regards,
Peter
---
Peter Ujfalusi (2):
  dmaengine: ti: k3-psil: Use soc_device_match to get the psil map
  dmaengine: ti: k3-psil: add map for j7200

 drivers/dma/ti/Makefile        |   5 +-
 drivers/dma/ti/k3-psil-j7200.c | 175 +++++++++++++++++++++++++++++++++
 drivers/dma/ti/k3-psil-priv.h  |   1 +
 drivers/dma/ti/k3-psil.c       |  19 +++-
 4 files changed, 194 insertions(+), 6 deletions(-)
 create mode 100644 drivers/dma/ti/k3-psil-j7200.c

-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki