Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH v8 08/10] gpu: host1x: mipi: Keep MIPI clock enabled till
 calibration is done
To:     Sowjanya Komatineni <skomatineni@nvidia.com>,
        Thierry Reding <thierry.reding@gmail.com>
Cc:     jonathanh@nvidia.com, frankc@nvidia.com, hverkuil@xs4all.nl,
        sakari.ailus@iki.fi, robh+dt@kernel.org, helen.koike@collabora.com,
        gregkh@linuxfoundation.org, linux-media@vger.kernel.org,
        devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
        linux-kernel@vger.kernel.org
References: <1596469346-937-1-git-send-email-skomatineni@nvidia.com>
 <1596469346-937-9-git-send-email-skomatineni@nvidia.com>
 <20200805134600.GA3351349@ulmo>
 <103efe31-1abc-54f2-6004-490d7bb1b61a@gmail.com>
 <dcd58ae7-58ed-11d1-0e10-7f522b651b30@gmail.com>
 <addb92e5-7c7a-6fba-117d-c7880b2d4597@nvidia.com>
 <ed80bf2f-213f-286a-59b2-fc85e4181b3d@gmail.com>
 <6eede805-80fd-016f-22f8-b6d25f6587af@nvidia.com>
 <1c12e40e-de7f-0599-a941-82760b4c7668@gmail.com>
 <9ef0b875-e826-43e2-207e-168d2081ff6a@nvidia.com>
 <4689cfe9-e7c4-48bf-217f-3a31b59b8bda@nvidia.com>
From:   Dmitry Osipenko <digetx@gmail.com>
Message-ID: <0e78c5ca-c529-1e98-891d-30351c9aae81@gmail.com>
Date:   Wed, 5 Aug 2020 20:34:22 +0300
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.10.0
MIME-Version: 1.0
In-Reply-To: <4689cfe9-e7c4-48bf-217f-3a31b59b8bda@nvidia.com>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

05.08.2020 20:29, Sowjanya Komatineni пишет:
...
> UART_FST_MIPI_CAL is the clock used for calibration logic which is FSM
> that goes thru sequence codes and when done waits for pads to be in
> LP-11 to apply results.
> 
> MIPI_CLK is controller gate clock which is also need to be kept enabled
> as incase if it sees LP-11 it updates registers so its recommended to
> have this clock enabled.
> 
> We can cancel_calibration() in CSI only when csi/sensor stream on fails
> and in which case there will be no LP-11 so we can unconditionally
> disable MIPI_CLK.
> 

There is no guarantee that the fail comes before the LP-11. For example,
some odd camera driver may have a complicated enable sequence which may
fail after enabling the hardware streaming.