Received: by 2002:a05:6a10:a0d1:0:0:0:0 with SMTP id j17csp3234386pxa; Sat, 8 Aug 2020 14:33:58 -0700 (PDT) X-Google-Smtp-Source: ABdhPJyP1wDJrnHXhrJP742M+y7JI0tLvU/0Lqk8oHUKje5R/gnNeBPD0mwAdDzSMZOQwh3ZdTqe X-Received: by 2002:a05:6402:3193:: with SMTP id di19mr14241528edb.98.1596922437771; Sat, 08 Aug 2020 14:33:57 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1596922437; cv=none; d=google.com; s=arc-20160816; b=qTYx0KSTiZLx6Rif+SG8Bu6CpaOckJBo8U3iLoYAJvOzWnfLipSY1Da1LD1jPrCkmi lriZM53pnPV7GDp8Hi1JDHDDvFThycYUmF8jtJpg1OPLJ00R6Kg34LkRUtV0KWyiQqLS zn8ueFPqYQClIVoZFBK3/PwcgDcvOFJ1L3ml6eJzUyUP1JoxmL1zf0tA8TL7/Vgdu26E /kezwe//FzsM1Ahd5Mrx70+qN/JA6ADX1KJnI3BWVz7bZh8EFllUnb45wb/BR08Eyo6p Ul9/m7p14HAIN+cplj579LhxrXLLex/vNeMbJwikVfGtI0euXwPenNsGePvSr8fSydLy wA2A== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:in-reply-to:content-disposition :mime-version:references:message-id:subject:cc:to:from:date :dkim-signature; bh=thbXREp9wJ4z298DpcJ7UsetbD+sGZZ/XCM4Sv57/XM=; b=dmv8Bbwfsau7NZXoV9j0ULOhdEfNsPtuyklmCyf+U6bBX9JMBvkiJTpAs0DScGMgBk yeMKSrEJkwinu73inflnMeVAqpFIDfdnT1fFVNSqvQj8U1KnXt1OvWc5FqPFGBnL9hqb kfohvkD7bJPqtKSD5xpC7zqHos+6gtRf1a8bH7Wt5xSo2Mw+GLmeIvLysEKwqDmFIoXV 1P90zOt70iOjuvAVKwwW4RdprMgaQb0Sy1ZwG4/bXiHF4LpFDJ3bMRt4ib/vW/rcL2Ab +k3piGY0RocYeqHMS/aiAZHFbictSR3lCigB3DQ9IYg6tUtnvg9X32hYzslnfB/GRJ3I t57Q== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass (test mode) header.i=@ideasonboard.com header.s=mail header.b="Fek3+/P9"; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id p12si7627923ejz.478.2020.08.08.14.33.34; Sat, 08 Aug 2020 14:33:57 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass (test mode) header.i=@ideasonboard.com header.s=mail header.b="Fek3+/P9"; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726250AbgHHVao (ORCPT + 99 others); Sat, 8 Aug 2020 17:30:44 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47752 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726069AbgHHVan (ORCPT ); Sat, 8 Aug 2020 17:30:43 -0400 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [IPv6:2001:4b98:dc2:55:216:3eff:fef7:d647]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5261CC061756 for ; Sat, 8 Aug 2020 14:30:43 -0700 (PDT) Received: from pendragon.ideasonboard.com (85-76-78-184-nat.elisa-mobile.fi [85.76.78.184]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 401BEF9; Sat, 8 Aug 2020 23:30:38 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1596922238; bh=rMrN6tpHw+1csZp8+MZyJOHRLUYOOBBXq7NbEu75OaA=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=Fek3+/P9AUwgxe03d5yPiRKyQV0/otTqFAuQj9/QIiTvKqhHeRjbP8yNmB7WD7r19 62uFxmPrO2aiNCSU3RjDbY5fvVau8EEdyByzDKZ7F6RPwzaSBMp+cB+szVxuts+Mse Ijgo0PZkJ5RK2TlCj6yvn2KamKIA0JM7+Ynk03yc= Date: Sun, 9 Aug 2020 00:30:22 +0300 From: Laurent Pinchart To: Vinay Simha B N Cc: Andrzej Hajda , Neil Armstrong , Jonas Karlman , Jernej Skrabec , David Airlie , Daniel Vetter , open list , "open list:DRM DRIVERS" Subject: Re: [PATCH v8 2/2] display/drm/bridge: TC358775 DSI/LVDS driver Message-ID: <20200808213022.GW6186@pendragon.ideasonboard.com> References: <1594388491-15129-1-git-send-email-simhavcs@gmail.com> <1594388491-15129-2-git-send-email-simhavcs@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Vinay, On Fri, Aug 07, 2020 at 06:22:59PM +0530, Vinay Simha B N wrote: > Hi All, > > Please Review the patch I'm afraid I won't have time for at least a couple of weeks. > On Wed, Jul 29, 2020 at 6:01 PM Vinay Simha B N wrote: > > > Hi All, > > > > Please Review the patch > > > > On Fri, Jul 10, 2020 at 7:11 PM Vinay Simha BN wrote: > > > >> This driver is tested with two panels individually with Apq8016-IFC6309 > >> board > >> > >> https://www.inforcecomputing.com/products/single-board-computers-sbc/qualcomm-snapdragon-410-inforce-6309-micro-sbc > >> > >> 1. 1366x768@60 auo,b101xtn01 data-mapping = "jeida-24" > >> 2. 800x480@60 innolux,at070tn92 data-mapping = "vesa-24" > >> > >> - power off sequence in proper order > >> - put_unaligned_be16, put_unaligned_le32 macros used > >> - static function for mode_valid > >> - len initialized > >> - MODE_CLOCK_HIGH handled properly > >> - bus_formats handeld in mode_valid > >> - GENMASK and FIELD_PREP used > >> - Kconfig proper indentation > >> - error handling enpoint data-lanes > >> - check for bus_formats unsupported > >> - display_timings naming local variables > >> - help modified > >> - ~vsdelay dynamic value set based on the > >> calculation of dsi speed, output speed, blanking > >> - panel->connector_type removed > >> - dual port implemented > >> - devm_drm_panel_bridge_add method used instead of panel > >> description modified > >> - regulator enable and disable with proper orders and delays > >> as per the spec > >> - removed drm_connector_status > >> - added bus_formats > >> - mdelay to usleep_range > >> - magic number to macros for CLRSI and mux registers > >> description modified > >> - replaced u32 instead of uint32_t > >> - updated alphabetic order of headers > >> - added SPDX identifier license > >> > >> Signed-off-by: Vinay Simha BN > >> > >> --- > >> v1: > >> Initial version > >> > >> v2: > >> * Andrzej Hajda review comments incorporated > >> SPDX identifier > >> development debug removed > >> alphabetic order headers > >> u32 instead of unit32_t > >> magic numbers to macros for CLRSI and mux registers > >> ignored return value > >> > >> * Laurent Pinchart review comments incorporated > >> mdelay to usleep_range > >> bus_formats added > >> > >> v3: > >> * Andrzej Hajda review comments incorporated > >> drm_connector_status removed > >> u32 rev removed and local variabl is used > >> regulator enable disable with proper orders and delays > >> as per the spec > >> devm_drm_panel_bridge_add method used instead of panel > >> description modified > >> dual port implemented > >> > >> v4: > >> * Sam Ravnborg review comments incorporated > >> panel->connector_type removed > >> > >> * Reported-by: kernel test robot > >> parse_dt to static function > >> removed the if (endpoint), since data-lanes has to be > >> present for dsi dts ports > >> > >> v5: > >> ~vsdelay dynamic value set based on the > >> calculation of dsi speed, output speed, blanking > >> > >> v6: > >> * Sam Ravnborg review comments incorporated > >> help modified > >> display_timings naming local variables > >> check for bus_formats unsupported > >> error handling enpoint data-lanes > >> > >> v7: > >> * Sam Ravnborg review comments incorporated > >> Kconfig proper indentation > >> GENMASK and FIELD_PREP used > >> bus_formats handeld in mode_valid > >> MODE_CLOCK_HIGH handled properly > >> > >> * Reported-by: kernel test robot > >> len initialized > >> static function for mode_valid > >> > >> v8: > >> * Andrzej Hajda review comments incorporated > >> power off sequence in proper order > >> put_unaligned_be16, put_unaligned_le32 macros used > >> * change log modified in reverse chronological order > >> --- > >> drivers/gpu/drm/bridge/Kconfig | 10 + > >> drivers/gpu/drm/bridge/Makefile | 1 + > >> drivers/gpu/drm/bridge/tc358775.c | 749 > >> ++++++++++++++++++++++++++++++++++++++ > >> 3 files changed, 760 insertions(+) > >> create mode 100644 drivers/gpu/drm/bridge/tc358775.c > >> > >> diff --git a/drivers/gpu/drm/bridge/Kconfig > >> b/drivers/gpu/drm/bridge/Kconfig > >> index 43271c2..25c3097 100644 > >> --- a/drivers/gpu/drm/bridge/Kconfig > >> +++ b/drivers/gpu/drm/bridge/Kconfig > >> @@ -181,6 +181,16 @@ config DRM_TOSHIBA_TC358768 > >> help > >> Toshiba TC358768AXBG/TC358778XBG DSI bridge chip driver. > >> > >> +config DRM_TOSHIBA_TC358775 > >> + tristate "Toshiba TC358775 DSI/LVDS bridge" > >> + depends on OF > >> + select DRM_KMS_HELPER > >> + select REGMAP_I2C > >> + select DRM_PANEL > >> + select DRM_MIPI_DSI > >> + help > >> + Toshiba TC358775 DSI/LVDS bridge chip driver. > >> + > >> config DRM_TI_TFP410 > >> tristate "TI TFP410 DVI/HDMI bridge" > >> depends on OF > >> diff --git a/drivers/gpu/drm/bridge/Makefile > >> b/drivers/gpu/drm/bridge/Makefile > >> index d63d4b7..23c770b 100644 > >> --- a/drivers/gpu/drm/bridge/Makefile > >> +++ b/drivers/gpu/drm/bridge/Makefile > >> @@ -15,6 +15,7 @@ obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o > >> obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o > >> obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o > >> obj-$(CONFIG_DRM_TOSHIBA_TC358768) += tc358768.o > >> +obj-$(CONFIG_DRM_TOSHIBA_TC358775) += tc358775.o > >> obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/ > >> obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o > >> obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o > >> diff --git a/drivers/gpu/drm/bridge/tc358775.c > >> b/drivers/gpu/drm/bridge/tc358775.c > >> new file mode 100644 > >> index 0000000..7da15cd > >> --- /dev/null > >> +++ b/drivers/gpu/drm/bridge/tc358775.c > >> @@ -0,0 +1,749 @@ > >> +// SPDX-License-Identifier: GPL-2.0 > >> +/* > >> + * TC358775 DSI to LVDS bridge driver > >> + * > >> + * Copyright (C) 2020 SMART Wireless Computing > >> + * Author: Vinay Simha BN > >> + * > >> + */ > >> +/* #define DEBUG */ > >> +#include > >> +#include > >> +#include > >> +#include > >> +#include > >> +#include > >> +#include > >> +#include > >> +#include > >> + > >> +#include > >> + > >> +#include > >> +#include > >> +#include > >> +#include > >> +#include > >> +#include > >> +#include > >> +#include > >> + > >> +#define FLD_VAL(val, start, end) FIELD_PREP(GENMASK(start, end), val) > >> + > >> +/* Registers */ > >> + > >> +/* DSI D-PHY Layer Registers */ > >> +#define D0W_DPHYCONTTX 0x0004 /* Data Lane 0 DPHY Tx Control */ > >> +#define CLW_DPHYCONTRX 0x0020 /* Clock Lane DPHY Rx Control */ > >> +#define D0W_DPHYCONTRX 0x0024 /* Data Lane 0 DPHY Rx Control */ > >> +#define D1W_DPHYCONTRX 0x0028 /* Data Lane 1 DPHY Rx Control */ > >> +#define D2W_DPHYCONTRX 0x002C /* Data Lane 2 DPHY Rx Control */ > >> +#define D3W_DPHYCONTRX 0x0030 /* Data Lane 3 DPHY Rx Control */ > >> +#define COM_DPHYCONTRX 0x0038 /* DPHY Rx Common Control */ > >> +#define CLW_CNTRL 0x0040 /* Clock Lane Control */ > >> +#define D0W_CNTRL 0x0044 /* Data Lane 0 Control */ > >> +#define D1W_CNTRL 0x0048 /* Data Lane 1 Control */ > >> +#define D2W_CNTRL 0x004C /* Data Lane 2 Control */ > >> +#define D3W_CNTRL 0x0050 /* Data Lane 3 Control */ > >> +#define DFTMODE_CNTRL 0x0054 /* DFT Mode Control */ > >> + > >> +/* DSI PPI Layer Registers */ > >> +#define PPI_STARTPPI 0x0104 /* START control bit of PPI-TX function. > >> */ > >> +#define PPI_START_FUNCTION 1 > >> + > >> +#define PPI_BUSYPPI 0x0108 > >> +#define PPI_LINEINITCNT 0x0110 /* Line Initialization Wait Counter */ > >> +#define PPI_LPTXTIMECNT 0x0114 > >> +#define PPI_LANEENABLE 0x0134 /* Enables each lane at the PPI layer. */ > >> +#define PPI_TX_RX_TA 0x013C /* DSI Bus Turn Around timing parameters > >> */ > >> + > >> +/* Analog timer function enable */ > >> +#define PPI_CLS_ATMR 0x0140 /* Delay for Clock Lane in LPRX */ > >> +#define PPI_D0S_ATMR 0x0144 /* Delay for Data Lane 0 in LPRX */ > >> +#define PPI_D1S_ATMR 0x0148 /* Delay for Data Lane 1 in LPRX */ > >> +#define PPI_D2S_ATMR 0x014C /* Delay for Data Lane 2 in LPRX */ > >> +#define PPI_D3S_ATMR 0x0150 /* Delay for Data Lane 3 in LPRX */ > >> + > >> +#define PPI_D0S_CLRSIPOCOUNT 0x0164 /* For lane 0 */ > >> +#define PPI_D1S_CLRSIPOCOUNT 0x0168 /* For lane 1 */ > >> +#define PPI_D2S_CLRSIPOCOUNT 0x016C /* For lane 2 */ > >> +#define PPI_D3S_CLRSIPOCOUNT 0x0170 /* For lane 3 */ > >> + > >> +#define CLS_PRE 0x0180 /* Digital Counter inside of PHY IO */ > >> +#define D0S_PRE 0x0184 /* Digital Counter inside of PHY IO */ > >> +#define D1S_PRE 0x0188 /* Digital Counter inside of PHY IO */ > >> +#define D2S_PRE 0x018C /* Digital Counter inside of PHY IO */ > >> +#define D3S_PRE 0x0190 /* Digital Counter inside of PHY IO */ > >> +#define CLS_PREP 0x01A0 /* Digital Counter inside of PHY IO */ > >> +#define D0S_PREP 0x01A4 /* Digital Counter inside of PHY IO */ > >> +#define D1S_PREP 0x01A8 /* Digital Counter inside of PHY IO */ > >> +#define D2S_PREP 0x01AC /* Digital Counter inside of PHY IO */ > >> +#define D3S_PREP 0x01B0 /* Digital Counter inside of PHY IO */ > >> +#define CLS_ZERO 0x01C0 /* Digital Counter inside of PHY IO */ > >> +#define D0S_ZERO 0x01C4 /* Digital Counter inside of PHY IO */ > >> +#define D1S_ZERO 0x01C8 /* Digital Counter inside of PHY IO */ > >> +#define D2S_ZERO 0x01CC /* Digital Counter inside of PHY IO */ > >> +#define D3S_ZERO 0x01D0 /* Digital Counter inside of PHY IO */ > >> + > >> +#define PPI_CLRFLG 0x01E0 /* PRE Counters has reached set values */ > >> +#define PPI_CLRSIPO 0x01E4 /* Clear SIPO values, Slave mode use > >> only. */ > >> +#define HSTIMEOUT 0x01F0 /* HS Rx Time Out Counter */ > >> +#define HSTIMEOUTENABLE 0x01F4 /* Enable HS Rx Time Out Counter */ > >> +#define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX function > >> */ > >> +#define DSI_RX_START 1 > >> + > >> +#define DSI_BUSYDSI 0x0208 > >> +#define DSI_LANEENABLE 0x0210 /* Enables each lane at the Protocol > >> layer. */ > >> +#define DSI_LANESTATUS0 0x0214 /* Displays lane is in HS RX mode. */ > >> +#define DSI_LANESTATUS1 0x0218 /* Displays lane is in ULPS or STOP > >> state */ > >> + > >> +#define DSI_INTSTATUS 0x0220 /* Interrupt Status */ > >> +#define DSI_INTMASK 0x0224 /* Interrupt Mask */ > >> +#define DSI_INTCLR 0x0228 /* Interrupt Clear */ > >> +#define DSI_LPTXTO 0x0230 /* Low Power Tx Time Out Counter */ > >> + > >> +#define DSIERRCNT 0x0300 /* DSI Error Count */ > >> +#define APLCTRL 0x0400 /* Application Layer Control */ > >> +#define RDPKTLN 0x0404 /* Command Read Packet Length */ > >> + > >> +#define VPCTRL 0x0450 /* Video Path Control */ > >> +#define HTIM1 0x0454 /* Horizontal Timing Control 1 */ > >> +#define HTIM2 0x0458 /* Horizontal Timing Control 2 */ > >> +#define VTIM1 0x045C /* Vertical Timing Control 1 */ > >> +#define VTIM2 0x0460 /* Vertical Timing Control 2 */ > >> +#define VFUEN 0x0464 /* Video Frame Timing Update Enable */ > >> +#define VFUEN_EN BIT(0) /* Upload Enable */ > >> + > >> +/* Mux Input Select for LVDS LINK Input */ > >> +#define LV_MX0003 0x0480 /* Bit 0 to 3 */ > >> +#define LV_MX0407 0x0484 /* Bit 4 to 7 */ > >> +#define LV_MX0811 0x0488 /* Bit 8 to 11 */ > >> +#define LV_MX1215 0x048C /* Bit 12 to 15 */ > >> +#define LV_MX1619 0x0490 /* Bit 16 to 19 */ > >> +#define LV_MX2023 0x0494 /* Bit 20 to 23 */ > >> +#define LV_MX2427 0x0498 /* Bit 24 to 27 */ > >> +#define LV_MX(b0, b1, b2, b3) (FLD_VAL(b0, 4, 0) | FLD_VAL(b1, 12, 8) | > >> \ > >> + FLD_VAL(b2, 20, 16) | FLD_VAL(b3, 28, 24)) > >> + > >> +/* Input bit numbers used in mux registers */ > >> +enum { > >> + LVI_R0, > >> + LVI_R1, > >> + LVI_R2, > >> + LVI_R3, > >> + LVI_R4, > >> + LVI_R5, > >> + LVI_R6, > >> + LVI_R7, > >> + LVI_G0, > >> + LVI_G1, > >> + LVI_G2, > >> + LVI_G3, > >> + LVI_G4, > >> + LVI_G5, > >> + LVI_G6, > >> + LVI_G7, > >> + LVI_B0, > >> + LVI_B1, > >> + LVI_B2, > >> + LVI_B3, > >> + LVI_B4, > >> + LVI_B5, > >> + LVI_B6, > >> + LVI_B7, > >> + LVI_HS, > >> + LVI_VS, > >> + LVI_DE, > >> + LVI_L0 > >> +}; > >> + > >> +#define LVCFG 0x049C /* LVDS Configuration */ > >> +#define LVPHY0 0x04A0 /* LVDS PHY 0 */ > >> +#define LV_PHY0_RST(v) FLD_VAL(v, 22, 22) /* PHY reset */ > >> +#define LV_PHY0_IS(v) FLD_VAL(v, 15, 14) > >> +#define LV_PHY0_ND(v) FLD_VAL(v, 4, 0) /* Frequency range > >> select */ > >> +#define LV_PHY0_PRBS_ON(v) FLD_VAL(v, 20, 16) /* Clock/Data Flag > >> pins */ > >> + > >> +#define LVPHY1 0x04A4 /* LVDS PHY 1 */ > >> +#define SYSSTAT 0x0500 /* System Status */ > >> +#define SYSRST 0x0504 /* System Reset */ > >> + > >> +#define SYS_RST_I2CS BIT(0) /* Reset I2C-Slave controller */ > >> +#define SYS_RST_I2CM BIT(1) /* Reset I2C-Master controller */ > >> +#define SYS_RST_LCD BIT(2) /* Reset LCD controller */ > >> +#define SYS_RST_BM BIT(3) /* Reset Bus Management controller */ > >> +#define SYS_RST_DSIRX BIT(4) /* Reset DSI-RX and App controller */ > >> +#define SYS_RST_REG BIT(5) /* Reset Register module */ > >> + > >> +/* GPIO Registers */ > >> +#define GPIOC 0x0520 /* GPIO Control */ > >> +#define GPIOO 0x0524 /* GPIO Output */ > >> +#define GPIOI 0x0528 /* GPIO Input */ > >> + > >> +/* I2C Registers */ > >> +#define I2CTIMCTRL 0x0540 /* I2C IF Timing and Enable Control */ > >> +#define I2CMADDR 0x0544 /* I2C Master Addressing */ > >> +#define WDATAQ 0x0548 /* Write Data Queue */ > >> +#define RDATAQ 0x054C /* Read Data Queue */ > >> + > >> +/* Chip ID and Revision ID Register */ > >> +#define IDREG 0x0580 > >> + > >> +#define LPX_PERIOD 4 > >> +#define TTA_GET 0x40000 > >> +#define TTA_SURE 6 > >> +#define SINGLE_LINK 1 > >> +#define DUAL_LINK 2 > >> + > >> +#define TC358775XBG_ID 0x00007500 > >> + > >> +/* Debug Registers */ > >> +#define DEBUG00 0x05A0 /* Debug */ > >> +#define DEBUG01 0x05A4 /* LVDS Data */ > >> + > >> +#define DSI_CLEN_BIT BIT(0) > >> +#define DIVIDE_BY_3 3 /* PCLK=DCLK/3 */ > >> +#define DIVIDE_BY_6 6 /* PCLK=DCLK/6 */ > >> +#define LVCFG_LVEN_BIT BIT(0) > >> + > >> +#define L0EN BIT(1) > >> + > >> +#define TC358775_VPCTRL_VSDELAY__MASK 0x3FF00000 > >> +#define TC358775_VPCTRL_VSDELAY__SHIFT 20 > >> +static inline u32 TC358775_VPCTRL_VSDELAY(uint32_t val) > >> +{ > >> + return ((val) << TC358775_VPCTRL_VSDELAY__SHIFT) & > >> + TC358775_VPCTRL_VSDELAY__MASK; > >> +} > >> + > >> +#define TC358775_VPCTRL_OPXLFMT__MASK 0x00000100 > >> +#define TC358775_VPCTRL_OPXLFMT__SHIFT 8 > >> +static inline u32 TC358775_VPCTRL_OPXLFMT(uint32_t val) > >> +{ > >> + return ((val) << TC358775_VPCTRL_OPXLFMT__SHIFT) & > >> + TC358775_VPCTRL_OPXLFMT__MASK; > >> +} > >> + > >> +#define TC358775_VPCTRL_MSF__MASK 0x00000001 > >> +#define TC358775_VPCTRL_MSF__SHIFT 0 > >> +static inline u32 TC358775_VPCTRL_MSF(uint32_t val) > >> +{ > >> + return ((val) << TC358775_VPCTRL_MSF__SHIFT) & > >> + TC358775_VPCTRL_MSF__MASK; > >> +} > >> + > >> +#define TC358775_LVCFG_PCLKDIV__MASK 0x000000f0 > >> +#define TC358775_LVCFG_PCLKDIV__SHIFT 4 > >> +static inline u32 TC358775_LVCFG_PCLKDIV(uint32_t val) > >> +{ > >> + return ((val) << TC358775_LVCFG_PCLKDIV__SHIFT) & > >> + TC358775_LVCFG_PCLKDIV__MASK; > >> +} > >> + > >> +#define TC358775_LVCFG_LVDLINK__MASK 0x00000002 > >> +#define TC358775_LVCFG_LVDLINK__SHIFT 0 > >> +static inline u32 TC358775_LVCFG_LVDLINK(uint32_t val) > >> +{ > >> + return ((val) << TC358775_LVCFG_LVDLINK__SHIFT) & > >> + TC358775_LVCFG_LVDLINK__MASK; > >> +} > >> + > >> +enum tc358775_ports { > >> + TC358775_DSI_IN, > >> + TC358775_LVDS_OUT0, > >> + TC358775_LVDS_OUT1, > >> +}; > >> + > >> +struct tc_data { > >> + struct i2c_client *i2c; > >> + struct device *dev; > >> + > >> + struct drm_bridge bridge; > >> + struct drm_bridge *panel_bridge; > >> + > >> + struct device_node *host_node; > >> + struct mipi_dsi_device *dsi; > >> + u8 num_dsi_lanes; > >> + > >> + struct regulator *vdd; > >> + struct regulator *vddio; > >> + struct gpio_desc *reset_gpio; > >> + struct gpio_desc *stby_gpio; > >> + u8 lvds_link; /* single-link or dual-link */ > >> + u8 bpc; > >> +}; > >> + > >> +static inline struct tc_data *bridge_to_tc(struct drm_bridge *b) > >> +{ > >> + return container_of(b, struct tc_data, bridge); > >> +} > >> + > >> +static void tc_bridge_pre_enable(struct drm_bridge *bridge) > >> +{ > >> + struct tc_data *tc = bridge_to_tc(bridge); > >> + struct device *dev = &tc->dsi->dev; > >> + int ret; > >> + > >> + ret = regulator_enable(tc->vddio); > >> + if (ret < 0) > >> + dev_err(dev, "regulator vddio enable failed, %d\n", ret); > >> + usleep_range(10000, 11000); > >> + > >> + ret = regulator_enable(tc->vdd); > >> + if (ret < 0) > >> + dev_err(dev, "regulator vdd enable failed, %d\n", ret); > >> + usleep_range(10000, 11000); > >> + > >> + gpiod_set_value(tc->stby_gpio, 0); > >> + usleep_range(10000, 11000); > >> + > >> + gpiod_set_value(tc->reset_gpio, 0); > >> + usleep_range(10, 20); > >> +} > >> + > >> +static void tc_bridge_post_disable(struct drm_bridge *bridge) > >> +{ > >> + struct tc_data *tc = bridge_to_tc(bridge); > >> + struct device *dev = &tc->dsi->dev; > >> + int ret; > >> + > >> + gpiod_set_value(tc->reset_gpio, 1); > >> + usleep_range(10, 20); > >> + > >> + gpiod_set_value(tc->stby_gpio, 1); > >> + usleep_range(10000, 11000); > >> + > >> + ret = regulator_disable(tc->vdd); > >> + if (ret < 0) > >> + dev_err(dev, "regulator vdd disable failed, %d\n", ret); > >> + usleep_range(10000, 11000); > >> + > >> + ret = regulator_disable(tc->vddio); > >> + if (ret < 0) > >> + dev_err(dev, "regulator vddio disable failed, %d\n", ret); > >> + usleep_range(10000, 11000); > >> +} > >> + > >> +static void d2l_read(struct i2c_client *i2c, u16 addr, u32 *val) > >> +{ > >> + int ret; > >> + u8 buf_addr[2]; > >> + > >> + put_unaligned_be16(addr, buf_addr); > >> + ret = i2c_master_send(i2c, buf_addr, sizeof(buf_addr)); > >> + if (ret < 0) > >> + goto fail; > >> + > >> + ret = i2c_master_recv(i2c, (u8 *)val, sizeof(*val)); > >> + if (ret < 0) > >> + goto fail; > >> + > >> + pr_debug("d2l: I2C : addr:%04x value:%08x\n", addr, *val); > >> + > >> +fail: > >> + dev_err(&i2c->dev, "Error %d reading from subaddress 0x%x\n", > >> + ret, addr); > >> +} > >> + > >> +static void d2l_write(struct i2c_client *i2c, u16 addr, u32 val) > >> +{ > >> + u8 data[6]; > >> + int ret; > >> + > >> + put_unaligned_be16(addr, data); > >> + put_unaligned_le32(val, data + 2); > >> + > >> + ret = i2c_master_send(i2c, data, ARRAY_SIZE(data)); > >> + if (ret < 0) > >> + dev_err(&i2c->dev, "Error %d writing to subaddress > >> 0x%x\n", > >> + ret, addr); > >> +} > >> + > >> +/* helper function to access bus_formats */ > >> +static struct drm_connector *get_connector(struct drm_encoder *encoder) > >> +{ > >> + struct drm_device *dev = encoder->dev; > >> + struct drm_connector *connector; > >> + > >> + list_for_each_entry(connector, &dev->mode_config.connector_list, > >> head) > >> + if (connector->encoder == encoder) > >> + return connector; > >> + > >> + return NULL; > >> +} > >> + > >> +static void tc_bridge_enable(struct drm_bridge *bridge) > >> +{ > >> + struct tc_data *tc = bridge_to_tc(bridge); > >> + u32 hback_porch, hsync_len, hfront_porch, hactive, htime1, htime2; > >> + u32 vback_porch, vsync_len, vfront_porch, vactive, vtime1, vtime2; > >> + u32 val = 0; > >> + u16 dsiclk, clkdiv, byteclk, t1, t2, t3, vsdelay; > >> + struct drm_display_mode *mode; > >> + struct drm_connector *connector = get_connector(bridge->encoder); > >> + > >> + mode = &bridge->encoder->crtc->state->adjusted_mode; > >> + > >> + hback_porch = mode->htotal - mode->hsync_end; > >> + hsync_len = mode->hsync_end - mode->hsync_start; > >> + vback_porch = mode->vtotal - mode->vsync_end; > >> + vsync_len = mode->vsync_end - mode->vsync_start; > >> + > >> + htime1 = (hback_porch << 16) + hsync_len; > >> + vtime1 = (vback_porch << 16) + vsync_len; > >> + > >> + hfront_porch = mode->hsync_start - mode->hdisplay; > >> + hactive = mode->hdisplay; > >> + vfront_porch = mode->vsync_start - mode->vdisplay; > >> + vactive = mode->vdisplay; > >> + > >> + htime2 = (hfront_porch << 16) + hactive; > >> + vtime2 = (vfront_porch << 16) + vactive; > >> + > >> + d2l_read(tc->i2c, IDREG, &val); > >> + > >> + dev_info(tc->dev, "DSI2LVDS Chip ID.%02x Revision ID. %02x **\n", > >> + (val >> 8) & 0xFF, val & 0xFF); > >> + > >> + d2l_write(tc->i2c, SYSRST, SYS_RST_REG | SYS_RST_DSIRX | > >> SYS_RST_BM | > >> + SYS_RST_LCD | SYS_RST_I2CM | SYS_RST_I2CS); > >> + usleep_range(30000, 40000); > >> + > >> + d2l_write(tc->i2c, PPI_TX_RX_TA, TTA_GET | TTA_SURE); > >> + d2l_write(tc->i2c, PPI_LPTXTIMECNT, LPX_PERIOD); > >> + d2l_write(tc->i2c, PPI_D0S_CLRSIPOCOUNT, 3); > >> + d2l_write(tc->i2c, PPI_D1S_CLRSIPOCOUNT, 3); > >> + d2l_write(tc->i2c, PPI_D2S_CLRSIPOCOUNT, 3); > >> + d2l_write(tc->i2c, PPI_D3S_CLRSIPOCOUNT, 3); > >> + > >> + val = ((L0EN << tc->num_dsi_lanes) - L0EN) | DSI_CLEN_BIT; > >> + d2l_write(tc->i2c, PPI_LANEENABLE, val); > >> + d2l_write(tc->i2c, DSI_LANEENABLE, val); > >> + > >> + d2l_write(tc->i2c, PPI_STARTPPI, PPI_START_FUNCTION); > >> + d2l_write(tc->i2c, DSI_STARTDSI, DSI_RX_START); > >> + > >> + if (tc->bpc == 8) > >> + val = TC358775_VPCTRL_OPXLFMT(1); > >> + else /* bpc = 6; */ > >> + val = TC358775_VPCTRL_MSF(1); > >> + > >> + dsiclk = mode->crtc_clock * 3 * tc->bpc / tc->num_dsi_lanes / > >> 1000; > >> + clkdiv = dsiclk / DIVIDE_BY_3 * tc->lvds_link; > >> + byteclk = dsiclk / 4; > >> + t1 = hactive * (tc->bpc * 3 / 8) / tc->num_dsi_lanes; > >> + t2 = ((100000 / clkdiv)) * (hactive + hback_porch + hsync_len + > >> hfront_porch) / 1000; > >> + t3 = ((t2 * byteclk) / 100) - (hactive * (tc->bpc * 3 / 8) / > >> + tc->num_dsi_lanes); > >> + > >> + vsdelay = (clkdiv * (t1 + t3) / byteclk) - hback_porch - > >> hsync_len - hactive; > >> + > >> + val |= TC358775_VPCTRL_VSDELAY(vsdelay); > >> + d2l_write(tc->i2c, VPCTRL, val); > >> + > >> + d2l_write(tc->i2c, HTIM1, htime1); > >> + d2l_write(tc->i2c, VTIM1, vtime1); > >> + d2l_write(tc->i2c, HTIM2, htime2); > >> + d2l_write(tc->i2c, VTIM2, vtime2); > >> + > >> + d2l_write(tc->i2c, VFUEN, VFUEN_EN); > >> + d2l_write(tc->i2c, SYSRST, SYS_RST_LCD); > >> + d2l_write(tc->i2c, LVPHY0, LV_PHY0_PRBS_ON(4) | LV_PHY0_ND(6)); > >> + > >> + dev_dbg(tc->dev, "bus_formats %04x bpc %d\n", > >> + connector->display_info.bus_formats[0], > >> + tc->bpc); > >> + /* > >> + * Default hardware register settings of tc358775 configured > >> + * with MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA jeida-24 format > >> + */ > >> + if (connector->display_info.bus_formats[0] == > >> + MEDIA_BUS_FMT_RGB888_1X7X4_SPWG) { > >> + /* VESA-24 */ > >> + d2l_write(tc->i2c, LV_MX0003, LV_MX(LVI_R0, LVI_R1, > >> LVI_R2, LVI_R3)); > >> + d2l_write(tc->i2c, LV_MX0407, LV_MX(LVI_R4, LVI_R7, > >> LVI_R5, LVI_G0)); > >> + d2l_write(tc->i2c, LV_MX0811, LV_MX(LVI_G1, LVI_G2, > >> LVI_G6, LVI_G7)); > >> + d2l_write(tc->i2c, LV_MX1215, LV_MX(LVI_G3, LVI_G4, > >> LVI_G5, LVI_B0)); > >> + d2l_write(tc->i2c, LV_MX1619, LV_MX(LVI_B6, LVI_B7, > >> LVI_B1, LVI_B2)); > >> + d2l_write(tc->i2c, LV_MX2023, LV_MX(LVI_B3, LVI_B4, > >> LVI_B5, LVI_L0)); > >> + d2l_write(tc->i2c, LV_MX2427, LV_MX(LVI_HS, LVI_VS, > >> LVI_DE, LVI_R6)); > >> + } else { /* MEDIA_BUS_FMT_RGB666_1X7X3_SPWG - JEIDA-18 */ > >> + d2l_write(tc->i2c, LV_MX0003, LV_MX(LVI_R0, LVI_R1, > >> LVI_R2, LVI_R3)); > >> + d2l_write(tc->i2c, LV_MX0407, LV_MX(LVI_R4, LVI_L0, > >> LVI_R5, LVI_G0)); > >> + d2l_write(tc->i2c, LV_MX0811, LV_MX(LVI_G1, LVI_G2, > >> LVI_L0, LVI_L0)); > >> + d2l_write(tc->i2c, LV_MX1215, LV_MX(LVI_G3, LVI_G4, > >> LVI_G5, LVI_B0)); > >> + d2l_write(tc->i2c, LV_MX1619, LV_MX(LVI_L0, LVI_L0, > >> LVI_B1, LVI_B2)); > >> + d2l_write(tc->i2c, LV_MX2023, LV_MX(LVI_B3, LVI_B4, > >> LVI_B5, LVI_L0)); > >> + d2l_write(tc->i2c, LV_MX2427, LV_MX(LVI_HS, LVI_VS, > >> LVI_DE, LVI_L0)); > >> + } > >> + > >> + d2l_write(tc->i2c, VFUEN, VFUEN_EN); > >> + > >> + val = LVCFG_LVEN_BIT; > >> + if (tc->lvds_link == DUAL_LINK) { > >> + val |= TC358775_LVCFG_LVDLINK(1); > >> + val |= TC358775_LVCFG_PCLKDIV(DIVIDE_BY_6); > >> + } else { > >> + val |= TC358775_LVCFG_PCLKDIV(DIVIDE_BY_3); > >> + }; > >> + d2l_write(tc->i2c, LVCFG, val); > >> +} > >> + > >> +static enum drm_mode_status > >> +tc_mode_valid(struct drm_bridge *bridge, > >> + const struct drm_display_info *info, > >> + const struct drm_display_mode *mode) > >> +{ > >> + struct tc_data *tc = bridge_to_tc(bridge); > >> + > >> + /* > >> + * Maximum pixel clock speed 135MHz for single-link > >> + * 270MHz for dual-link > >> + */ > >> + if ((mode->clock > 135000 && tc->lvds_link == SINGLE_LINK) || > >> + (mode->clock > 270000 && tc->lvds_link == DUAL_LINK)) > >> + return MODE_CLOCK_HIGH; > >> + > >> + switch (info->bus_formats[0]) { > >> + case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG: > >> + case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA: > >> + /* RGB888 */ > >> + tc->bpc = 8; > >> + break; > >> + case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG: > >> + /* RGB666 */ > >> + tc->bpc = 6; > >> + break; > >> + default: > >> + dev_warn(tc->dev, > >> + "unsupported LVDS bus format 0x%04x\n", > >> + info->bus_formats[0]); > >> + return MODE_NOMODE; > >> + } > >> + > >> + return MODE_OK; > >> +} > >> + > >> +static int tc358775_parse_dt(struct device_node *np, struct tc_data *tc) > >> +{ > >> + struct device_node *endpoint; > >> + struct device_node *parent; > >> + struct device_node *remote; > >> + struct property *prop; > >> + int len = 0; > >> + > >> + /* > >> + * To get the data-lanes of dsi, we need to access the dsi0_out > >> of port1 > >> + * of dsi0 endpoint from bridge port0 of d2l_in > >> + */ > >> + endpoint = of_graph_get_endpoint_by_regs(tc->dev->of_node, > >> + TC358775_DSI_IN, -1); > >> + if (endpoint) { > >> + /* dsi0_out node */ > >> + parent = of_graph_get_remote_port_parent(endpoint); > >> + of_node_put(endpoint); > >> + if (parent) { > >> + /* dsi0 port 1 */ > >> + endpoint = of_graph_get_endpoint_by_regs(parent, > >> 1, -1); > >> + of_node_put(parent); > >> + if (endpoint) { > >> + prop = of_find_property(endpoint, > >> "data-lanes", > >> + &len); > >> + of_node_put(endpoint); > >> + if (!prop) { > >> + dev_err(tc->dev, > >> + "failed to find data > >> lane\n"); > >> + return -EPROBE_DEFER; > >> + } > >> + } > >> + } > >> + } > >> + > >> + tc->num_dsi_lanes = len / sizeof(u32); > >> + > >> + if (tc->num_dsi_lanes < 1 || tc->num_dsi_lanes > 4) > >> + return -EINVAL; > >> + > >> + tc->host_node = of_graph_get_remote_node(np, 0, 0); > >> + if (!tc->host_node) > >> + return -ENODEV; > >> + > >> + of_node_put(tc->host_node); > >> + > >> + tc->lvds_link = SINGLE_LINK; > >> + endpoint = of_graph_get_endpoint_by_regs(tc->dev->of_node, > >> + TC358775_LVDS_OUT1, -1); > >> + if (endpoint) { > >> + remote = of_graph_get_remote_port_parent(endpoint); > >> + of_node_put(endpoint); > >> + > >> + if (remote) { > >> + if (of_device_is_available(remote)) > >> + tc->lvds_link = DUAL_LINK; > >> + of_node_put(remote); > >> + } > >> + } > >> + > >> + dev_dbg(tc->dev, "no.of dsi lanes: %d\n", tc->num_dsi_lanes); > >> + dev_dbg(tc->dev, "operating in %d-link mode\n", tc->lvds_link); > >> + > >> + return 0; > >> +} > >> + > >> +static int tc_bridge_attach(struct drm_bridge *bridge, > >> + enum drm_bridge_attach_flags flags) > >> +{ > >> + struct tc_data *tc = bridge_to_tc(bridge); > >> + struct device *dev = &tc->i2c->dev; > >> + struct mipi_dsi_host *host; > >> + struct mipi_dsi_device *dsi; > >> + int ret; > >> + > >> + const struct mipi_dsi_device_info info = { .type = "tc358775", > >> + .channel = 0, > >> + .node = NULL, > >> + }; > >> + > >> + host = of_find_mipi_dsi_host_by_node(tc->host_node); > >> + if (!host) { > >> + dev_err(dev, "failed to find dsi host\n"); > >> + return -EPROBE_DEFER; > >> + } > >> + > >> + dsi = mipi_dsi_device_register_full(host, &info); > >> + if (IS_ERR(dsi)) { > >> + dev_err(dev, "failed to create dsi device\n"); > >> + ret = PTR_ERR(dsi); > >> + goto err_dsi_device; > >> + } > >> + > >> + tc->dsi = dsi; > >> + > >> + dsi->lanes = tc->num_dsi_lanes; > >> + dsi->format = MIPI_DSI_FMT_RGB888; > >> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO; > >> + > >> + ret = mipi_dsi_attach(dsi); > >> + if (ret < 0) { > >> + dev_err(dev, "failed to attach dsi to host\n"); > >> + goto err_dsi_attach; > >> + } > >> + > >> + /* Attach the panel-bridge to the dsi bridge */ > >> + return drm_bridge_attach(bridge->encoder, tc->panel_bridge, > >> + &tc->bridge, flags); > >> +err_dsi_attach: > >> + mipi_dsi_device_unregister(dsi); > >> +err_dsi_device: > >> + return ret; > >> +} > >> + > >> +static const struct drm_bridge_funcs tc_bridge_funcs = { > >> + .attach = tc_bridge_attach, > >> + .pre_enable = tc_bridge_pre_enable, > >> + .enable = tc_bridge_enable, > >> + .mode_valid = tc_mode_valid, > >> + .post_disable = tc_bridge_post_disable, > >> +}; > >> + > >> +static int tc_probe(struct i2c_client *client, const struct > >> i2c_device_id *id) > >> +{ > >> + struct device *dev = &client->dev; > >> + struct drm_panel *panel; > >> + struct tc_data *tc; > >> + int ret; > >> + > >> + tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL); > >> + if (!tc) > >> + return -ENOMEM; > >> + > >> + tc->dev = dev; > >> + tc->i2c = client; > >> + > >> + ret = drm_of_find_panel_or_bridge(dev->of_node, > >> TC358775_LVDS_OUT0, > >> + 0, &panel, NULL); > >> + if (ret < 0) > >> + return ret; > >> + if (!panel) > >> + return -ENODEV; > >> + > >> + tc->panel_bridge = devm_drm_panel_bridge_add(dev, panel); > >> + if (IS_ERR(tc->panel_bridge)) > >> + return PTR_ERR(tc->panel_bridge); > >> + > >> + ret = tc358775_parse_dt(dev->of_node, tc); > >> + if (ret) > >> + return ret; > >> + > >> + tc->vddio = devm_regulator_get(dev, "vddio-supply"); > >> + if (IS_ERR(tc->vddio)) { > >> + ret = PTR_ERR(tc->vddio); > >> + dev_err(dev, "vddio-supply not found\n"); > >> + return ret; > >> + } > >> + > >> + tc->vdd = devm_regulator_get(dev, "vdd-supply"); > >> + if (IS_ERR(tc->vdd)) { > >> + ret = PTR_ERR(tc->vddio); > >> + dev_err(dev, "vdd-supply not found\n"); > >> + return ret; > >> + } > >> + > >> + tc->stby_gpio = devm_gpiod_get(dev, "stby", GPIOD_OUT_HIGH); > >> + if (IS_ERR(tc->stby_gpio)) { > >> + ret = PTR_ERR(tc->stby_gpio); > >> + dev_err(dev, "cannot get stby-gpio %d\n", ret); > >> + return ret; > >> + } > >> + > >> + tc->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); > >> + if (IS_ERR(tc->reset_gpio)) { > >> + ret = PTR_ERR(tc->reset_gpio); > >> + dev_err(dev, "cannot get reset-gpios %d\n", ret); > >> + return ret; > >> + } > >> + > >> + tc->bridge.funcs = &tc_bridge_funcs; > >> + tc->bridge.of_node = dev->of_node; > >> + drm_bridge_add(&tc->bridge); > >> + > >> + i2c_set_clientdata(client, tc); > >> + > >> + return 0; > >> +} > >> + > >> +static int tc_remove(struct i2c_client *client) > >> +{ > >> + struct tc_data *tc = i2c_get_clientdata(client); > >> + > >> + drm_bridge_remove(&tc->bridge); > >> + > >> + return 0; > >> +} > >> + > >> +static const struct i2c_device_id tc358775_i2c_ids[] = { > >> + { "tc358775", 0 }, > >> + { } > >> +}; > >> +MODULE_DEVICE_TABLE(i2c, tc358775_i2c_ids); > >> + > >> +static const struct of_device_id tc358775_of_ids[] = { > >> + { .compatible = "toshiba,tc358775", }, > >> + { } > >> +}; > >> +MODULE_DEVICE_TABLE(of, tc358775_of_ids); > >> + > >> +static struct i2c_driver tc358775_driver = { > >> + .driver = { > >> + .name = "tc358775", > >> + .of_match_table = tc358775_of_ids, > >> + }, > >> + .id_table = tc358775_i2c_ids, > >> + .probe = tc_probe, > >> + .remove = tc_remove, > >> +}; > >> +module_i2c_driver(tc358775_driver); > >> + > >> +MODULE_AUTHOR("Vinay Simha BN "); > >> +MODULE_DESCRIPTION("TC358775 DSI/LVDS bridge driver"); > >> +MODULE_LICENSE("GPL v2"); -- Regards, Laurent Pinchart