Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751006AbWEPOwA (ORCPT ); Tue, 16 May 2006 10:52:00 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751170AbWEPOwA (ORCPT ); Tue, 16 May 2006 10:52:00 -0400 Received: from anchor-post-33.mail.demon.net ([194.217.242.91]:1037 "EHLO anchor-post-33.mail.demon.net") by vger.kernel.org with ESMTP id S1751151AbWEPOv6 (ORCPT ); Tue, 16 May 2006 10:51:58 -0400 Message-ID: <4469E709.7080501@onelan.co.uk> Date: Tue, 16 May 2006 15:51:53 +0100 From: Barry Scott User-Agent: Thunderbird 1.5 (X11/20051201) MIME-Version: 1.0 To: Linux Kernel Dev Subject: broadcom 5752 in HP dc7600U works on 2.6.13 but does not working on 2.6.16 Content-Type: multipart/mixed; boundary="------------070707060206090308010102" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 33488 Lines: 762 This is a multi-part message in MIME format. --------------070707060206090308010102 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Under FC4's build of 2.6.13 the broadcom 5752 works well. But when the I use the FC4 build of 2.6.16 it no long works. The hardware is an HP dc7600U, P4 2.8GHz CPU, 512MB memory SATA disk. mii-tool correctly reports the state of the eth0. Removing and inserting the cable is reported as expected. But DHCP or static IP configuration does not work under 2.6.16. In dmesg output on 2.6.16 I see this message: ADDRCONF(NETDEV_UP): eth0: link is not ready I have recompiled the 2.6.13 version of tg3.c for 2.6.16 and that does not fix the problem. Looking at /proc/interrupts I see that a lot of difference between .13 and .16 kernels. Is this related to the problem? Attached are the output of dmesg and /proc/interrupts on 2.6.13 and 2.6.16 kernels as well as lspci output. Barry --------------070707060206090308010102 Content-Type: text/plain; name="dmesg-2.6.13.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg-2.6.13.txt" Linux version 2.6.13-1.1526_FC4 (bhcompile@hs20-bc1-6.build.redhat.com) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 Wed Sep 28 19:15:10 EDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f7cf300 (usable) BIOS-e820: 000000001f7cf300 - 0000000020000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 503MB LOWMEM available. Using x86 segment limits to approximate NX protection On node 0 totalpages: 128975 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 124879 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.4 present. ACPI: RSDP (v000 COMPAQ ) @ 0x000e8c10 ACPI: RSDT (v001 COMPAQ CPQ0968 0x20050518 0x00000000) @ 0x1f7df340 ACPI: FADT (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7df3ec ACPI: MADT (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7df460 ACPI: ASF! (v032 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7df4e4 ACPI: MCFG (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7df547 ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0xf808 Allocating PCI resources starting at 20000000 (gap: 20000000:d0000000) Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 acpi=ht quiet Initializing CPU#0 CPU 0 irqstacks, hard=c04e7000 soft=c04e6000 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 2793.550 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 504688k/515900k available (3084k kernel code, 10612k reserved, 704k data, 176k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5592.94 BogoMIPS (lpj=11185890) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000080 0000641d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available mtrr: v2.0 (20020519) CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 1791k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.20 entry at 0xec51b, last bus=63 PCI: Using MMCONFIG ACPI: Subsystem revision 20050408 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 PCI: Discovered primary peer bus 01 [IRQ] PCI: Using IRQ router PIIX/ICH [8086/27b8] at 0000:00:1f.0 PCI: IRQ 0 for device 0000:00:1c.1 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 10 for device 0000:00:1c.1 PCI: Sharing IRQ 10 with 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:3f:00.0 PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: e0500000-e07fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: e1000000-e31fffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Found IRQ 10 for device 0000:00:1c.1 PCI: Sharing IRQ 10 with 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:3f:00.0 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1147790248.720:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 54AD4C348BA3456 - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 PCI: Setting latency timer of device 0000:00:1c.0 to 64 pcie_portdrv_probe->Dev[27d0:8086] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] PCI: Found IRQ 10 for device 0000:00:1c.1 PCI: Sharing IRQ 10 with 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:3f:00.0 PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945G Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 PCI: Found IRQ 10 for device 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:00:1c.1 PCI: Sharing IRQ 10 with 0000:3f:00.0 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: HL-DT-ST GCR-8240N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: ATAPI 24X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.38 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 6, 458752 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 176k freed SCSI subsystem initialized libata version 1.12 loaded. ata_piix version 1.04 PCI: Found IRQ 5 for device 0000:00:1f.2 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x10D8 ctl 0x10F2 bmdma 0x10B0 irq 5 ata2: SATA max UDMA/133 cmd 0x10E0 ctl 0x10F6 bmdma 0x10B8 irq 5 ata1: dev 0 cfg 49:2f00 82:3069 83:7c01 84:4023 85:3069 86:3401 87:4023 88:203f ata1: dev 0 ATA, max UDMA/100, 156301488 sectors: lba48 ata1: dev 0 configured for UDMA/100 scsi0 : ata_piix input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 ATA: abnormal status 0x7F on port 0x10E7 ata2: disabling port scsi1 : ata_piix Vendor: ATA Model: ST380819AS Rev: 3.02 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks FDC 0 is a post-1991 82077 tg3.c:v3.37 (August 25, 2005) PCI: Found IRQ 10 for device 0000:3f:00.0 PCI: Sharing IRQ 10 with 0000:00:1c.1 PCI: Sharing IRQ 10 with 0000:00:1f.1 PCI: Setting latency timer of device 0000:3f:00.0 to 64 eth0: Tigon3 [partno(BCM95752) rev 6001 PHY(5752)] (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:14:c2:56:72:c9 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] PCI: Found IRQ 11 for device 0000:00:1b.0 PCI: Sharing IRQ 11 with 0000:00:1d.2 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hw_random hardware driver 1.0.0 loaded shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 Linux video capture interface: v1.00 cx88_dvb: Unknown symbol vp3054_i2c_remove cx88_dvb: Unknown symbol nxt200x_attach cx88_dvb: Unknown symbol zl10353_attach cx88_dvb: Unknown symbol cx24123_attach cx88_dvb: Unknown symbol vp3054_i2c_probe cx8800: Unknown symbol v4l_compat_ioctl32 PCI: Found IRQ 5 for device 0000:00:1d.7 PCI: Sharing IRQ 5 with 0000:00:1d.0 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 5, io mem 0xe04c4000 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.3 PCI: Found IRQ 5 for device 0000:00:1d.0 PCI: Sharing IRQ 5 with 0000:00:1d.7 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 5, io base 0x00001000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Found IRQ 11 for device 0000:00:1d.1 PCI: Sharing IRQ 11 with 0000:05:09.0 PCI: Sharing IRQ 11 with 0000:05:09.2 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001020 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Found IRQ 11 for device 0000:00:1d.2 PCI: Sharing IRQ 11 with 0000:00:1b.0 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001040 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PCI: Found IRQ 11 for device 0000:00:1d.3 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001060 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2097144k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. cx88_dvb: Unknown symbol vp3054_i2c_remove cx88_dvb: Unknown symbol nxt200x_attach cx88_dvb: Unknown symbol zl10353_attach cx88_dvb: Unknown symbol cx24123_attach cx88_dvb: Unknown symbol vp3054_i2c_probe hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hda: drive_cmd: error=0x04 { AbortedCommand } ide: failed opcode was: 0xec NET: Registered protocol family 10 Disabled Privacy Extensions on device c0475600(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present --------------070707060206090308010102 Content-Type: text/plain; name="dmesg-2.6.16.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg-2.6.16.txt" Linux version 2.6.16-1.2096_FC4 (bhcompile@hs20-bc1-4.build.redhat.com) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 Wed Apr 19 15:27:46 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f7cf300 (usable) BIOS-e820: 000000001f7cf300 - 0000000020000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 503MB LOWMEM available. found SMP MP-table at 000fe700 Using x86 segment limits to approximate NX protection On node 0 totalpages: 128975 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 124879 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.4 present. ACPI: RSDP (v000 COMPAQ ) @ 0x000e8c10 ACPI: RSDT (v001 COMPAQ CPQ0968 0x20050518 0x00000000) @ 0x1f7df340 ACPI: FADT (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7df3ec ACPI: MADT (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7df460 ACPI: ASF! (v032 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7df4e4 ACPI: MCFG (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7df547 ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0xf808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 WARNING: NR_CPUS limit of 1 reached. Processor ignored. ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: COMPAQ Product ID: APIC at: 0xFEE00000 I/O APIC #1 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Allocating PCI resources starting at 30000000 (gap: 20000000:d0000000) Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 acpi=ht quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c040a000 soft=c040b000 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 2793.649 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 505692k/515900k available (2131k kernel code, 9720k reserved, 754k data, 200k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5597.77 BogoMIPS (lpj=11195556) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000180 0000641d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01 Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=-1 pin1=-1 apic2=-1 pin2=-1 ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. checking if image is initramfs... it is Freeing initrd memory: 1756k freed HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.20 entry at 0xec51b, last bus=63 PCI: Using MMCONFIG ACPI: Subsystem revision 20060127 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 PCI: Discovered primary peer bus 01 [IRQ] PCI: Using IRQ router PIIX/ICH [8086/27b8] at 0000:00:1f.0 PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:00:1b.0[A] -> IRQ 21 PCI->APIC IRQ transform: 0000:00:1c.1[B] -> IRQ 17 PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 20 PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 18 PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 21 PCI->APIC IRQ transform: 0000:00:1d.3[D] -> IRQ 22 PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 20 PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 19 PCI: using PPB 0000:00:1c.1[A] to get irq 16 PCI->APIC IRQ transform: 0000:3f:00.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:05:09.0[A] -> IRQ 18 PCI->APIC IRQ transform: 0000:05:09.2[A] -> IRQ 18 PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: e0500000-e07fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: e1000000-e31fffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1147789692.852:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key FD06BDCFDB15BAC1 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:1c.0 to 64 pcie_portdrv_probe->Dev[27d0:8086] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945G Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: HL-DT-ST GCR-8240N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: ATAPI 24X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard as /class/input/input0 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 16384 (order: 6, 327680 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 200k freed Write protecting the kernel read-only data: 346k SCSI subsystem initialized libata version 1.20 loaded. ata_piix 0000:00:1f.2: version 1.05 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x10D8 ctl 0x10F2 bmdma 0x10B0 irq 19 ata2: SATA max UDMA/133 cmd 0x10E0 ctl 0x10F6 bmdma 0x10B8 irq 19 ata1: dev 0 cfg 49:2f00 82:3069 83:7c01 84:4023 85:3069 86:3401 87:4023 88:203f ata1: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48 ata1: dev 0 configured for UDMA/100 scsi0 : ata_piix ATA: abnormal status 0x7F on port 0x10E7 ata2: disabling port scsi1 : ata_piix Vendor: ATA Model: ST380819AS Rev: 3.02 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks FDC 0 is a post-1991 82077 tg3.c:v3.49 (Feb 2, 2006) PCI: Setting latency timer of device 0000:3f:00.0 to 64 eth0: Tigon3 [partno(BCM95752) rev 6001 PHY(5752)] (PCI Express) 10/100/1000BaseT Ethernet 00:14:c2:56:72:c9 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] PCI: Setting latency timer of device 0000:00:1b.0 to 64 hw_random hardware driver 1.0.0 loaded Linux video capture interface: v1.00 cx2388x dvb driver version 0.0.5 loaded CORE cx88[0]: subsystem: 17de:08a6, board: KWorld/VStream XPert DVB-T [card=14,autodetected] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe input: cx88 IR (KWorld/VStream XPert D as /class/input/input2 cx88[0]/2: found at 0000:05:09.2, rev: 5, irq: 18, latency: 32, mmio: 0xe2000000 cx88[0]/2: cx2388x based dvb card DVB: registering new adapter (cx88[0]). DVB: registering frontend 0 (Zarlink MT352 DVB-T)... cx2388x v4l2 driver version 0.0.5 loaded cx88[0]/0: found at 0000:05:09.0, rev: 5, irq: 18, latency: 32, mmio: 0xe1000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 set_control id=0x980900 reg=0x310110 val=0x00 (mask 0xff) set_control id=0x980901 reg=0x310110 val=0x3f00 (mask 0xff00) set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff) set_control id=0x980902 reg=0x310114 val=0x5a7f (mask 0xffff) set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed] set_control id=0x980906 reg=0x320598 val=0x40 (mask 0x7f) [shadowed] PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe04c4000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.3 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001020 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 22, io base 0x00001060 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2097144k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2097144k hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hda: drive_cmd: error=0x04 { AbortedCommand } ide: failed opcode was: 0xec NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6 over IPv4 tunneling driver --------------070707060206090308010102 Content-Type: text/plain; name="interrupts.2.6.13.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="interrupts.2.6.13.txt" CPU0 0: 18405 XT-PIC timer 1: 123 XT-PIC i8042 2: 0 XT-PIC cascade 5: 2899 XT-PIC libata, ehci_hcd:usb1, uhci_hcd:usb2 8: 1 XT-PIC rtc 10: 130 XT-PIC eth0 11: 60 XT-PIC HDA Intel, uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5 12: 102 XT-PIC i8042 14: 361 XT-PIC ide0 NMI: 0 ERR: 0 --------------070707060206090308010102 Content-Type: text/plain; name="interrupts.2.6.16.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="interrupts.2.6.16.txt" CPU0 0: 50458 local-APIC-edge timer 1: 124 IO-APIC-edge i8042 2: 0 XT-PIC cascade 8: 1 IO-APIC-edge rtc 12: 106 IO-APIC-edge i8042 14: 362 IO-APIC-edge ide0 16: 0 IO-APIC-level eth0 18: 0 IO-APIC-level cx88[0], cx88[0], uhci_hcd:usb3 19: 2961 IO-APIC-level libata 20: 0 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2 21: 99 IO-APIC-level HDA Intel, uhci_hcd:usb4 22: 0 IO-APIC-level uhci_hcd:usb5 NMI: 0 LOC: 50420 ERR: 0 MIS: 0 --------------070707060206090308010102 Content-Type: text/plain; name="lspci.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="lspci.txt" 00:00.0 Host bridge: Intel Corporation Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Integrated Graphics Controller (rev 02) 00:1b.0 Class 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01) 05:09.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 05:09.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) 3f:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express (rev 01) --------------070707060206090308010102 Content-Type: text/plain; name="mii-tool.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="mii-tool.txt" eth0: negotiated 100baseTx-FD, link ok --------------070707060206090308010102-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/