Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: sB39yN+BVDu2PoWjFb+GvvuwE1xCzGOF9zhlrYpHtajDLw82dcwzNdyBRKMi1WHilBONsBlZaQ
 ft10DzkhgKjw==
IronPort-SDR: 6faF++bStC7CbW7JmF76TSaiiQB8K0ag+qY7CtjTExBsoF8Z8QYg8tL18A5c35oN0yfmKcaQeX
 o5OJad2qHQyQ==
From:   Sakari Ailus <sakari.ailus@linux.intel.com>
To:     linux-i2c@vger.kernel.org
Cc:     Wolfram Sang <wsa@the-dreams.de>,
        "Rafael J. Wysocki" <rafael@kernel.org>,
        linux-acpi@vger.kernel.org, Bingbu Cao <bingbu.cao@intel.com>,
        linux-media@vger.kernel.org,
        Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>,
        Hyungwoo Yang <hyungwoo.yang@intel.com>,
        Bartosz Golaszewski <bgolaszewski@baylibre.com>,
        Arnd Bergmann <arnd@arndb.de>, linux-kernel@vger.kernel.org,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        rajmohan.mani@intel.com, Tomasz Figa <tfiga@chromium.org>,
        "Qiu, Tian Shu" <tian.shu.qiu@intel.com>
Subject: [PATCH v5 3/6] ov5670: Support probe whilst the device is in a low power state
Date:   Mon, 10 Aug 2020 17:27:44 +0300
Message-Id: <20200810142747.12400-4-sakari.ailus@linux.intel.com>
In-Reply-To: <20200810142747.12400-1-sakari.ailus@linux.intel.com>
References: <20200810142747.12400-1-sakari.ailus@linux.intel.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Tell ACPI device PM code that the driver supports the device being in a
low power state when the driver's probe function is entered.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 drivers/media/i2c/ov5670.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/media/i2c/ov5670.c b/drivers/media/i2c/ov5670.c
index f26252e35e08d..1f75b888d2a18 100644
--- a/drivers/media/i2c/ov5670.c
+++ b/drivers/media/i2c/ov5670.c
@@ -2456,6 +2456,7 @@ static int ov5670_probe(struct i2c_client *client)
 	struct ov5670 *ov5670;
 	const char *err_msg;
 	u32 input_clk = 0;
+	bool low_power;
 	int ret;
 
 	device_property_read_u32(&client->dev, "clock-frequency", &input_clk);
@@ -2472,11 +2473,14 @@ static int ov5670_probe(struct i2c_client *client)
 	/* Initialize subdev */
 	v4l2_i2c_subdev_init(&ov5670->sd, client, &ov5670_subdev_ops);
 
-	/* Check module identity */
-	ret = ov5670_identify_module(ov5670);
-	if (ret) {
-		err_msg = "ov5670_identify_module() error";
-		goto error_print;
+	low_power = acpi_dev_state_low_power(&client->dev);
+	if (!low_power) {
+		/* Check module identity */
+		ret = ov5670_identify_module(ov5670);
+		if (ret) {
+			err_msg = "ov5670_identify_module() error";
+			goto error_print;
+		}
 	}
 
 	mutex_init(&ov5670->mutex);
@@ -2513,10 +2517,10 @@ static int ov5670_probe(struct i2c_client *client)
 	ov5670->streaming = false;
 
 	/*
-	 * Device is already turned on by i2c-core with ACPI domain PM.
-	 * Enable runtime PM and turn off the device.
+	 * Don't set the device's state to active if it's in a low power state.
 	 */
-	pm_runtime_set_active(&client->dev);
+	if (!low_power)
+		pm_runtime_set_active(&client->dev);
 	pm_runtime_enable(&client->dev);
 	pm_runtime_idle(&client->dev);
 
@@ -2558,7 +2562,7 @@ static const struct dev_pm_ops ov5670_pm_ops = {
 
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id ov5670_acpi_ids[] = {
-	{"INT3479"},
+	{ "INT3479" },
 	{ /* sentinel */ }
 };
 
@@ -2573,6 +2577,7 @@ static struct i2c_driver ov5670_i2c_driver = {
 	},
 	.probe_new = ov5670_probe,
 	.remove = ov5670_remove,
+	.flags = I2C_DRV_FL_ALLOW_LOW_POWER_PROBE,
 };
 
 module_i2c_driver(ov5670_i2c_driver);
-- 
2.20.1