Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932500AbWEPSaR (ORCPT ); Tue, 16 May 2006 14:30:17 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932501AbWEPSaR (ORCPT ); Tue, 16 May 2006 14:30:17 -0400 Received: from tassadar.physics.auth.gr ([155.207.123.25]:3507 "EHLO tassadar.physics.auth.gr") by vger.kernel.org with ESMTP id S932500AbWEPSaO (ORCPT ); Tue, 16 May 2006 14:30:14 -0400 Date: Tue, 16 May 2006 21:29:57 +0300 (EEST) From: Dimitris Zilaskos To: Chase Venters cc: linux-kernel@vger.kernel.org Subject: Re: events/0 eats 100% cpu on core duo laptop In-Reply-To: Message-ID: References: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 22271 Lines: 455 Hi , > events is used for a lot of things. Can you send lspci and dmesg output? Can > you try leaving the system totally idle (no network traffic, etc) for a while > and see if that delay before events begins looping is affected? The problem starts within 1 minute after boot...without running anything lspci: 00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03) 00:1b.0 Class 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 Class 0106: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=AHCI (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd.: Unknown device 4363 (rev 12) 05:00.0 Network controller: Intel Corporation: Unknown device 4222 (rev 02) 08:03.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21) 08:03.1 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21) 08:03.2 Class 0805: O2 Micro, Inc.: Unknown device 7120 (rev 01) 08:03.3 Bridge: O2 Micro, Inc.: Unknown device 7130 (rev 01) 08:03.4 FireWire (IEEE 1394): O2 Micro, Inc.: Unknown device 00f7 (rev 02) dmesg: Linux version 2.6.16.16 (root@mitsos) (gcc version 3.3.6) #1 SMP PREEMPT Tue May 16 16:06:28 EEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f660000 (usable) BIOS-e820: 000000001f660000 - 000000001f66b000 (ACPI data) BIOS-e820: 000000001f66b000 - 000000001f700000 (ACPI NVS) BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 502MB LOWMEM available. On node 0 totalpages: 128608 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 124512 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.4 present. ACPI: RSDP (v000 FUJ ) @ 0x000f5b90 ACPI: RSDT (v001 FUJ FJNB1AF 0x01100000 FUJ 0x00000100) @ 0x1f6632ac ACPI: FADT (v001 FUJ FJNB1AF 0x01100000 FUJ 0x00000100) @ 0x1f66af8c ACPI: SSDT (v001 FUJ FJNB1AF 0x01100000 MSFT 0x0100000e) @ 0x1f669e42 ACPI: MCFG (v001 FUJ FJNB1AF 0x01100000 FUJ 0x00000100) @ 0x1f66a0a7 ACPI: SSDT (v001 FUJ FJNB1AF 0x01100000 INTL 0x20050624) @ 0x1f66a0e3 ACPI: SSDT (v001 FUJ FJNB1AF 0x01100000 INTL 0x20050624) @ 0x1f66ac93 ACPI: MADT (v001 FUJ FJNB1AF 0x01100000 LTP 0x00000000) @ 0x1f66aec4 ACPI: HPET (v001 FUJ FJNB1AF 0x01100000 FUJ 0x00000100) @ 0x1f66af2c ACPI: BOOT (v001 FUJ FJNB1AF 0x01100000 FUJ 0x00000100) @ 0x1f66af64 ACPI: DSDT (v001 FUJ FJNB1AF 0x01100000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:d8000000) Built 1 zonelists Kernel command line: auto BOOT_IMAGE=Linux ro root=805 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1662.820 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 504232k/514432k available (3344k kernel code, 9792k reserved, 1246k data, 216k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3332.10 BogoMIPS (lpj=1666051) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. CPU0: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3324.56 BogoMIPS (lpj=1662284) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 Total of 2 processors activated (6656.67 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=2000 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS BUG #81[000fdc70] found PCI: Using MMCONFIG ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #09 (-#0c) may be hidden behind transparent bridge #08 (-#09) (try 'pci=assign-busses') PCI: Bus #0d (-#10) may be hidden behind transparent bridge #08 (-#09) (try 'pci=assign-busses') ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: Embedded Controller [EC] (gpe 23) interrupt mode. ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2 PCI: Cannot allocate resource region 0 of device 0000:05:00.0 PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: f0000000-f00fffff PREFETCH window: 34000000-340fffff PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: 34100000-341fffff PREFETCH window: disabled. PCI: Bus 9, cardbus bridge: 0000:08:03.0 IO window: 00003000-000030ff IO window: 00003400-000034ff PREFETCH window: 30000000-31ffffff MEM window: 36000000-37ffffff PCI: Bus 13, cardbus bridge: 0000:08:03.1 IO window: 00003800-000038ff IO window: 00003c00-00003cff PREFETCH window: 32000000-33ffffff MEM window: 38000000-39ffffff PCI: Bridge: 0000:00:1e.0 IO window: 3000-3fff MEM window: f0200000-f02fffff PREFETCH window: 30000000-33ffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 22 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Enabling device 0000:00:1c.2 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:08:03.0[A] -> GSI 16 (level, low) -> IRQ 19 PCI: Enabling device 0000:08:03.1 (0080 -> 0083) ACPI: PCI Interrupt 0000:08:03.1[A] -> GSI 16 (level, low) -> IRQ 19 Simple Boot Flag at 0x7b set to 0x1 Machine check exception polling timer started. audit: initializing netlink socket (disabled) audit(1147810871.683:1): initialized Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.26 [Flags: R/W]. Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [CMB1] (battery present) ACPI: Battery Slot [CMB2] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PWRB] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Thermal Zone [TZ00] (27 C) ACPI: Thermal Zone [TZ01] (27 C) lp: driver loaded but no devices found Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xe0000000 [drm] Initialized drm 1.0.1 20051102 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). floppy0: no floppy controllers found ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 v0.15 addr 0xf0000000 irq 19 Yukon-EC Ultra (0xb4) rev 2 sky2 eth0: addr 00:17:42:04:0c:3e Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20 ICH7: chipset revision 2 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: _NEC DVD+/-RW ND-6650A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.20 loaded. ahci 0000:00:1f.2: version 1.2 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ata1: SATA max UDMA/133 cmd 0xE002E500 ctl 0x0 bmdma 0x0 irq 21 ata2: SATA max UDMA/133 cmd 0xE002E580 ctl 0x0 bmdma 0x0 irq 21 ata3: SATA max UDMA/133 cmd 0xE002E600 ctl 0x0 bmdma 0x0 irq 21 ata4: SATA max UDMA/133 cmd 0xE002E680 ctl 0x0 bmdma 0x0 irq 21 ata1: SATA link up 1.5 Gbps (SStatus 113) ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:6003 85:3c69 86:3f01 87:6003 88:20ff ata1: dev 0 ATA-7, max UDMA7, 156301488 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : ahci ata2: SATA link down (SStatus 0) scsi1 : ahci ata3: SATA link down (SStatus 0) scsi2 : ahci ata4: SATA link down (SStatus 0) scsi3 : ahci Vendor: ATA Model: SAMSUNG HM080JI Rev: YC10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 > sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 ACPI: PCI Interrupt 0000:08:03.4[A] -> GSI 16 (level, low) -> IRQ 19 ohci1394: fw-host0: Unexpected PCI resource length of 1000! ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f0201000-f02017ff] Max Packet=[2048] IR/IT contexts=[8/8] ieee1394: raw1394: /dev/raw1394 device initialized usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 22, io mem 0xf0644000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 22, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 2-2: new low speed USB device using uhci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. input: Microsoft Microsoft 3-Button Mouse with IntelliEye? as /class/input/input0 input: USB HID v1.00 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye?] on usb-0000:00:1d.0-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20 2006 UTC). ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC262, trying auto-probe from BIOS... input: AT Translated Set 2 keyboard as /class/input/input1 ALSA device list: #0: HDA Intel at 0xf0640000 irq 23 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 196608 bytes) TCP bind hash table entries: 16384 (order: 5, 196608 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered ip_conntrack version 2.4 (4019 buckets, 32152 max) - 232 bytes per conntrack TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI Shortcut mode ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000e1003435956] EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 216k freed Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04793/0x302000 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input2 Adding 248968k swap on /dev/sda6. Priority:-1 extents:1 across:248968k EXT3 FS on sda5, internal journal NTFS volume version 3.1. sky2 eth0: enabling interface input: PS/2 Generic Mouse as /class/input/input3 sky2 eth0: Link is up at 100 Mbps, full duplex, flow control tx ACPI: PCI Interrupt 0000:08:03.0[A] -> GSI 16 (level, low) -> IRQ 19 Yenta: CardBus bridge found at 0000:08:03.0 [10cf:131e] Yenta O2: res at 0x94/0xD4: 00/ea Yenta O2: enabling read prefetch/write burst Yenta: ISA IRQ mask 0x0c38, PCI irq 19 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff cs: IO port probe 0x3000-0x3fff: clean. pcmcia: parent PCI bridge Memory window: 0xf0200000 - 0xf02fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff ACPI: PCI Interrupt 0000:08:03.1[A] -> GSI 16 (level, low) -> IRQ 19 Yenta: CardBus bridge found at 0000:08:03.1 [10cf:131e] Yenta: ISA IRQ mask 0x0c38, PCI irq 19 Socket status: 30000410 pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff cs: IO port probe 0x3000-0x3fff: clean. pcmcia: parent PCI bridge Memory window: 0xf0200000 - 0xf02fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff pccard: PCMCIA card inserted into slot 1 usb 5-2: new full speed USB device using uhci_hcd and address 2 usb 5-2: configuration #1 chosen from 1 choice usb 5-2: USB disconnect, address 2 > Do you have an earlier or later kernel release you can test/confirm as > affected or unaffected? It's not much fun, but if you can find a kernel that > properly works, it's always possible to do a bisect... Will give it a try if I get some time... Best regards, -- ============================================================================ Dimitris Zilaskos Department of Physics @ Aristotle University of Thessaloniki , Greece PGP key : http://tassadar.physics.auth.gr/~dzila/pgp_public_key.asc http://egnatia.ee.auth.gr/~dzila/pgp_public_key.asc MD5sum : de2bd8f73d545f0e4caf3096894ad83f pgp_public_key.asc ============================================================================ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/