Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932456AbWEQHLm (ORCPT ); Wed, 17 May 2006 03:11:42 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932458AbWEQHLm (ORCPT ); Wed, 17 May 2006 03:11:42 -0400 Received: from tassadar.physics.auth.gr ([155.207.123.25]:43992 "EHLO tassadar.physics.auth.gr") by vger.kernel.org with ESMTP id S932456AbWEQHLl (ORCPT ); Wed, 17 May 2006 03:11:41 -0400 Date: Wed, 17 May 2006 10:11:25 +0300 (EEST) From: Dimitris Zilaskos To: Andrew Morton cc: Stephen Hemminger , linux-kernel@vger.kernel.org Subject: Re: events/0 eats 100% cpu on core duo laptop In-Reply-To: <20060516165121.105315a8.akpm@osdl.org> Message-ID: References: <20060516122303.48b14dc1.akpm@osdl.org> <20060516152256.34c2feea@localhost.localdomain> <20060516165121.105315a8.akpm@osdl.org> MIME-Version: 1.0 Content-Type: MULTIPART/MIXED; BOUNDARY="-838198917-675495676-1147849885=:739" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 29411 Lines: 766 This message is in MIME format. The first part should be readable text, while the remaining parts are likely unreadable without MIME-aware tools. ---838198917-675495676-1147849885=:739 Content-Type: TEXT/PLAIN; charset=X-UNKNOWN; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE =09I have just installed 2.6.17-rc4 and the problems I mentioned=20 have vanished. However I am now flooded with messages during boot: Linux version 2.6.17-rc4 (root@mitsos) (=DD=EA=E4=EF=F3=E7 gcc 3.3.6) #1 SM= P PREEMPT Wed May 17 09:49:38 EEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f660000 (usable) BIOS-e820: 000000001f660000 - 000000001f66b000 (ACPI data) BIOS-e820: 000000001f66b000 - 000000001f700000 (ACPI NVS) BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 502MB LOWMEM available. On node 0 totalpages: 128608 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 124512 pages, LIFO batch:31 DMI 2.4 present. ACPI: RSDP (v000 FUJ ) @ 0x000f5b90 ACPI: RSDT (v001 FUJ FJNB1AF 0x01100000 FUJ 0x00000100) @ 0x1f6632ac ACPI: FADT (v001 FUJ FJNB1AF 0x01100000 FUJ 0x00000100) @ 0x1f66af8c ACPI: SSDT (v001 FUJ FJNB1AF 0x01100000 MSFT 0x0100000e) @ 0x1f669e42 ACPI: MCFG (v001 FUJ FJNB1AF 0x01100000 FUJ 0x00000100) @ 0x1f66a0a7 ACPI: SSDT (v001 FUJ FJNB1AF 0x01100000 INTL 0x20050624) @ 0x1f66a0e3 ACPI: SSDT (v001 FUJ FJNB1AF 0x01100000 INTL 0x20050624) @ 0x1f66ac93 ACPI: MADT (v001 FUJ FJNB1AF 0x01100000 LTP 0x00000000) @ 0x1f66aec4 ACPI: HPET (v001 FUJ FJNB1AF 0x01100000 FUJ 0x00000100) @ 0x1f66af2c ACPI: BOOT (v001 FUJ FJNB1AF 0x01100000 FUJ 0x00000100) @ 0x1f66af64 ACPI: DSDT (v001 FUJ FJNB1AF 0x01100000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:d8000000) Built 1 zonelists Kernel command line: BOOT_IMAGE=3DLinux ro root=3D805 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1663.504 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 504572k/514432k available (3167k kernel code, 9364k reserved, 1187k= data, 216k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok= =2E Calibrating delay using timer specific routine.. 3328.95 BogoMIPS (lpj=3D16= 64476) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000= c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c= 1a9 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00= 000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 20k freed CPU0: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3324.58 BogoMIPS (lpj=3D16= 62294) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000= c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c= 1a9 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00= 000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 Total of 2 processors activated (6653.54 BogoMIPS). ENABLING IO-APIC IRQs =2E.TIMER: vector=3D0x31 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=3D1000 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area is not E820-reserved PCI: Not using MMCONFIG. PCI: BIOS BUG #81[000fdc70] found PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #09 (-#0c) is hidden behind transparent bridge #08 (-#09) (try 'pc= i=3Dassign-busses') Please report the result to linux-kernel to fix this permanently PCI: Bus #0d (-#10) is hidden behind transparent bridge #08 (-#09) (try 'pc= i=3Dassign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: Embedded Controller [EC] (gpe 23) interrupt mode. ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a r= eport PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2 PCI: Cannot allocate resource region 0 of device 0000:05:00.0 PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: f0000000-f00fffff PREFETCH window: 34000000-340fffff PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: 34100000-341fffff PREFETCH window: disabled. PCI: Bus 9, cardbus bridge: 0000:08:03.0 IO window: 00003000-000030ff IO window: 00003400-000034ff PREFETCH window: 30000000-31ffffff MEM window: 36000000-37ffffff PCI: Bus 13, cardbus bridge: 0000:08:03.1 IO window: 00003800-000038ff IO window: 00003c00-00003cff PREFETCH window: 32000000-33ffffff MEM window: 38000000-39ffffff PCI: Bridge: 0000:00:1e.0 IO window: 3000-3fff MEM window: f0200000-f02fffff PREFETCH window: 30000000-33ffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 22 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Enabling device 0000:00:1c.2 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:08:03.0[A] -> GSI 16 (level, low) -> IRQ 19 PCI: Enabling device 0000:08:03.1 (0080 -> 0083) ACPI: PCI Interrupt 0000:08:03.1[A] -> GSI 16 (level, low) -> IRQ 19 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 196608 bytes) TCP bind hash table entries: 8192 (order: 4, 98304 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Simple Boot Flag at 0x7b set to 0x1 Machine check exception polling timer started. audit: initializing netlink socket (disabled) audit(1147860151.851:1): initialized Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.27 [Flags: R/W]. Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [CMB1] (battery present) ACPI: Battery Slot [CMB2] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PWRB] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Thermal Zone [TZ00] (27 C) ACPI: Thermal Zone [TZ01] (27 C) lp: driver loaded but no devices found Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xe0000000 [drm] Initialized drm 1.0.1 20051102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A serial8250: ttyS3 at I/O 0x2e8 (irq =3D 3) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). floppy0: no floppy controllers found ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 v1.3 addr 0xf0000000 irq 19 Yukon-EC Ultra (0xb4) rev 2 sky2 eth0: addr 00:17:42:04:0c:3e Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20 ICH7: chipset revision 2 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout hda: _NEC DVD+/-RW ND-6650A, ATAPI CD/DVD-ROM drive sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.20 loaded. ahci 0000:00:1f.2: version 1.2 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21 sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA m= ode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part=20 ata1: SATA max UDMA/133 cmd 0xE002E500 ctl 0x0 bmdma 0x0 irq 21 ata2: SATA max UDMA/133 cmd 0xE002E580 ctl 0x0 bmdma 0x0 irq 21 ata3: SATA max UDMA/133 cmd 0xE002E600 ctl 0x0 bmdma 0x0 irq 21 ata4: SATA max UDMA/133 cmd 0xE002E680 ctl 0x0 bmdma 0x0 irq 21 sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout ata1: SATA link up 1.5 Gbps (SStatus 113) sky2 eth0: phy read timeout sky2 eth0: phy read timeout ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:6003 85:3c69 86:3f01 87:6003 88:= 20ff ata1: dev 0 ATA-7, max UDMA7, 156301488 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : ahci sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout ata2: SATA link down (SStatus 0) scsi1 : ahci sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout ata3: SATA link down (SStatus 0) scsi2 : ahci sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout ata4: SATA link down (SStatus 0) scsi3 : ahci Vendor: ATA Model: SAMSUNG HM080JI Rev: YC10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda:<4>sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sda1 sda2 <<4>sky2 eth0: phy read timeout sky2 eth0: phy read timeout sda5 sda6 > sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 ACPI: PCI Interrupt 0000:08:03.4[A] -> GSI 16 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=3D[19] MMIO=3D[f0201000-f0201= 7ff] Max Packet=3D[2048] IR/IT contexts=3D[8/8] ieee1394: raw1394: /dev/raw1394 device initialized usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 22, io mem 0xf0644000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected sky2 eth0: phy read timeout sky2 eth0: phy read timeout USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 22, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected sky2 eth0: phy read timeout sky2 eth0: phy read timeout ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected sky2 eth0: phy read timeout sky2 eth0: phy read timeout ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected sky2 eth0: phy read timeout sky2 eth0: phy read timeout ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected sky2 eth0: phy read timeout sky2 eth0: phy read timeout usb 2-2: new low speed USB device using uhci_hcd and address 2 sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout usb 2-2: configuration #1 chosen from 1 choice sky2 eth0: phy read timeout sky2 eth0: phy read timeout usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. input: Microsoft Microsoft 3-Button Mouse with IntelliEye? as /class/input/= input0 input: USB HID v1.00 Mouse [Microsoft Microsoft 3-Button Mouse with Intelli= Eye?] on usb-0000:00:1d.0-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:2= 7:24 2006 UTC). ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1b.0 to 64 sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout input: AT Translated Set 2 keyboard as /class/input/input1 sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout ALSA device list: #0: HDA Intel at 0xf0640000 irq 23 ip_conntrack version 2.4 (4019 buckets, 32152 max) - 224 bytes per conntrac= k sky2 eth0: phy read timeout sky2 eth0: phy read timeout TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI Shortcut mode ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000e1003435956] sky2 eth0: phy read timeout sky2 eth0: phy read timeout kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 216k freed sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04793/0x302000 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input2 sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout Adding 248968k swap on /dev/sda6. Priority:-1 extents:1 across:248968k sky2 eth0: phy read timeout sky2 eth0: phy read timeout EXT3 FS on sda5, internal journal sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout NTFS volume version 3.1. sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout input: PS/2 Generic Mouse as /class/input/input3 sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: phy read timeout sky2 eth0: enabling interface sky2 eth0: Link is up at 100 Mbps, full duplex, flow control none ACPI: PCI Interrupt 0000:08:03.0[A] -> GSI 16 (level, low) -> IRQ 19 Yenta: CardBus bridge found at 0000:08:03.0 [10cf:131e] Yenta O2: res at 0x94/0xD4: 00/ea Yenta O2: enabling read prefetch/write burst Yenta: ISA IRQ mask 0x0438, PCI irq 19 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff cs: IO port probe 0x3000-0x3fff: clean. pcmcia: parent PCI bridge Memory window: 0xf0200000 - 0xf02fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff ACPI: PCI Interrupt 0000:08:03.1[A] -> GSI 16 (level, low) -> IRQ 19 Yenta: CardBus bridge found at 0000:08:03.1 [10cf:131e] Yenta: ISA IRQ mask 0x0c38, PCI irq 19 Socket status: 30000410 pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff cs: IO port probe 0x3000-0x3fff: clean. pcmcia: parent PCI bridge Memory window: 0xf0200000 - 0xf02fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff pccard: PCMCIA card inserted into slot 1 mtrr: no more MTRRs available mtrr: no more MTRRs available >> >> That's my driver. I put a lot of fixes in for 2.6.17, one of which chan= ges >> the setup of the chip type used in this machine. The driver is significa= ntly >> changed from 2.6.16 so best bet is to just take the 2.6.17 latest versio= n >> and compile it on 2.6.16 (or update to 2.6.17). I got reports from Fujit= su E610 >> user that it now works fine. =09Best regards, -- =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D Dimitris Zilaskos Department of Physics @ Aristotle University of Thessaloniki , Greece PGP key : http://tassadar.physics.auth.gr/~dzila/pgp_public_key.asc =09 http://egnatia.ee.auth.gr/~dzila/pgp_public_key.asc MD5sum : de2bd8f73d545f0e4caf3096894ad83f pgp_public_key.asc =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D ---838198917-675495676-1147849885=:739-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/