Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Received-SPF: Pass (protection.outlook.com: domain of xilinx.com designates
 149.199.60.83 as permitted sender) receiver=protection.outlook.com;
 client-ip=149.199.60.83; helo=xsj-pvapsmtpgw01;
Date:   Thu, 13 Aug 2020 13:35:43 -0700 (PDT)
From:   Stefano Stabellini <stefano.stabellini@xilinx.com>
To:     Ben Levinsky <ben.levinsky@xilinx.com>
cc:     stefanos@xilinx.com, michals@xilinx.com,
        devicetree@vger.kernel.org, mathieu.poirier@linaro.org,
        ed.mooring@xilinx.com, linux-remoteproc@vger.kernel.org,
        linux-kernel@vger.kernel.org, robh+dt@kernel.org,
        wendy.liang@xilinx.com, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v8 3/5] firmware: xilinx: Add RPU configuration APIs
In-Reply-To: <20200811033213.20088-4-ben.levinsky@xilinx.com>
Message-ID: <alpine.DEB.2.21.2008131109090.15669@sstabellini-ThinkPad-T480s>
References: <20200811033213.20088-1-ben.levinsky@xilinx.com> <20200811033213.20088-4-ben.levinsky@xilinx.com>
User-Agent: Alpine 2.21 (DEB 202 2017-01-01)
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 13 Aug 2020 20:35:53.0335
 (UTC)
X-MS-Exchange-CrossTenant-Network-Message-Id: 405f6dad-b673-4422-7cb3-08d83fc87915
X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c;Ip=[149.199.60.83];Helo=[xsj-pvapsmtpgw01]
X-MS-Exchange-CrossTenant-AuthSource: SN1NAM02FT0051.eop-nam02.prod.protection.outlook.com
X-MS-Exchange-CrossTenant-AuthAs: Anonymous
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: DM6PR02MB6060
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

On Mon, 10 Aug 2020, Ben Levinsky wrote:
> This patch adds APIs to provide access and a configuration interface
> to the current power state of a sub-system on Zynqmp sub-system.

This doesn't read correctly


> Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com>
> ---
> v3:
> - add xilinx-related platform mgmt fn's instead of wrapping around
>   function pointer in xilinx eemi ops struct
> v4:
> - add default values for enums
> ---
>  drivers/firmware/xilinx/zynqmp.c     | 99 ++++++++++++++++++++++++++++
>  include/linux/firmware/xlnx-zynqmp.h | 34 ++++++++++
>  2 files changed, 133 insertions(+)
> 
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index f1a0bd35deeb..fdd61d258e55 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -846,6 +846,61 @@ int zynqmp_pm_release_node(const u32 node)
>  }
>  EXPORT_SYMBOL_GPL(zynqmp_pm_release_node);
>  
> +/**
> + * zynqmp_pm_get_rpu_mode() - Get RPU mode
> + * @node_id:	Node ID of the device
> + * @arg1:	Argument 1 to requested IOCTL call
> + * @arg2:	Argument 2 to requested IOCTL call
> + * @out:	Returned output value
> + *
> + * Return: RPU mode

What kind of output are we expecting? An enum? Which one?


> + */
> +int zynqmp_pm_get_rpu_mode(u32 node_id,
> +			   u32 arg1, u32 arg2, u32 *out)
> +{
> +	return zynqmp_pm_invoke_fn(PM_IOCTL, node_id,
> +				   IOCTL_GET_RPU_OPER_MODE, 0, 0, out);
> +}
> +EXPORT_SYMBOL_GPL(zynqmp_pm_get_rpu_mode);
> +
> +/**
> + * zynqmp_pm_set_rpu_mode() - Set RPU mode
> + * @node_id:	Node ID of the device
> + * @ioctl_id:	ID of the requested IOCTL
> + * @arg2:	Argument 2 to requested IOCTL call
> + * @out:	Returned output value
> + *
> + * This function is used to set RPU mode.
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +int zynqmp_pm_set_rpu_mode(u32 node_id,
> +			   u32 arg1, u32 arg2, u32 *out)
> +{
> +	return zynqmp_pm_invoke_fn(PM_IOCTL, node_id,
> +				   IOCTL_SET_RPU_OPER_MODE, 0, 0, out);
> +}
> +EXPORT_SYMBOL_GPL(zynqmp_pm_set_rpu_mode);
> +
> +/**
> + * zynqmp_pm_tcm_comb_config - configure TCM
> + * @node_id:	Node ID of the device
> + * @arg1:	Argument 1 to requested IOCTL call
> + * @arg2:	Argument 2 to requested IOCTL call
> + * @out:	Returned output value

Same question on the type of the output value


> + * This function is used to set RPU mode.
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +int zynqmp_pm_set_tcm_config(u32 node_id,
> +			     u32 arg1, u32 arg2, u32 *out)
> +{
> +	return zynqmp_pm_invoke_fn(PM_IOCTL, node_id,
> +				   IOCTL_TCM_COMB_CONFIG, 0, 0, out);
> +}
> +EXPORT_SYMBOL_GPL(zynqmp_pm_set_tcm_config);
> +
>  /**
>   * zynqmp_pm_force_powerdown - PM call to request for another PU or subsystem to
>   *             be powered down forcefully
> @@ -881,6 +936,50 @@ int zynqmp_pm_request_wakeup(const u32 node,
>  }
>  EXPORT_SYMBOL_GPL(zynqmp_pm_request_wakeup);
>  
> +/**
> + * zynqmp_pm_get_node_status - PM call to request a node's current power state
> + * @node:      ID of the component or sub-system in question
> + * @status:        Current operating state of the requested node
> + * @requirements:  Current requirements asserted on the node,
> + *         used for slave nodes only.
> + * @usage:     Usage information, used for slave nodes only:
> + *         PM_USAGE_NO_MASTER  - No master is currently using
> + *                       the node
> + *         PM_USAGE_CURRENT_MASTER - Only requesting master is
> + *                       currently using the node
> + *         PM_USAGE_OTHER_MASTER   - Only other masters are
> + *                       currently using the node
> + *         PM_USAGE_BOTH_MASTERS   - Both the current and at least
> + *                       one other master is currently
> + *                       using the node
> + *
> + * Return: status, either success or error+reason

Same question on status


> + */
> +int zynqmp_pm_get_node_status(const u32 node,
> +			      u32 *status, u32 *requirements,
> +			      u32 *usage)
> +
> +{
> +	u32 ret_payload[PAYLOAD_ARG_CNT];
> +	int ret;
> +
> +	if (!status)
> +		return -EINVAL;
> +
> +	ret = zynqmp_pm_invoke_fn(PM_GET_NODE_STATUS, node, 0, 0, 0,
> +				  ret_payload);
> +	if (ret_payload[0] == XST_PM_SUCCESS) {
> +		*status = ret_payload[1];
> +		if (requirements)
> +			*requirements = ret_payload[2];
> +		if (usage)
> +			*usage = ret_payload[3];
> +	}
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(zynqmp_pm_get_node_status);
> +
>  /**
>   * zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves
>   * @node:		Node ID of the slave
> diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
> index 4d83a7d69c4c..0caca9e2223a 100644
> --- a/include/linux/firmware/xlnx-zynqmp.h
> +++ b/include/linux/firmware/xlnx-zynqmp.h
> @@ -64,6 +64,7 @@
>  
>  enum pm_api_id {
>  	PM_GET_API_VERSION = 1,
> +	PM_GET_NODE_STATUS = 3,
>  	PM_FORCE_POWERDOWN = 8,
>  	PM_REQUEST_WAKEUP = 10,
>  	PM_SYSTEM_SHUTDOWN = 12,
> @@ -384,6 +385,14 @@ int zynqmp_pm_request_wakeup(const u32 node,
>  			     const bool set_addr,
>  			     const u64 address,
>  			     const enum zynqmp_pm_request_ack ack);
> +int zynqmp_pm_get_node_status(const u32 node, u32 *status,
> +			      u32 *requirements, u32 *usage);
> +int zynqmp_pm_get_rpu_mode(u32 node_id,
> +			   u32 arg1, u32 arg2, u32 *out);
> +int zynqmp_pm_set_rpu_mode(u32 node_id,
> +			   u32 arg1, u32 arg2, u32 *out);
> +int zynqmp_pm_set_tcm_config(u32 node_id,
> +			     u32 arg1, u32 arg2, u32 *out);
>  #else
>  static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
>  {
> @@ -548,6 +557,31 @@ static inline int zynqmp_pm_request_wakeup(const u32 node,
>  {
>  	return -ENODEV;
>  }
> +
> +static inline int zynqmp_pm_get_node_status(const u32 node,
> +					    u32 *status, u32 *requirements,
> +					    u32 *usage)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline int zynqmp_pm_get_rpu_mode(u32 node_id,
> +					 u32 arg1, u32 arg2, u32 *out)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline int zynqmp_pm_set_rpu_mode(u32 node_id,
> +					 u32 arg1, u32 arg2, u32 *out)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline int zynqmp_pm_set_tcm_config(u32 node_id,
> +					   u32 arg1, u32 arg2, u32 *out)
> +{
> +	return -ENODEV;
> +}
>  #endif
>  
>  #endif /* __FIRMWARE_ZYNQMP_H__ */