Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Thomas Preston <thomas.preston@codethink.co.uk>
To:     linus.walleij@linaro.org, robh+dt@kernel.org,
        linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     thomas.preston@codethink.co.uk
Subject: [PATCH 0/3] pinctrl: mcp23s08: Fixups for mcp23x17
Date:   Fri, 14 Aug 2020 11:03:54 +0100
Message-Id: <20200814100357.209340-1-thomas.preston@codethink.co.uk>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi,
I'm in the process of adding a device tree overlay for the PiFace
Digital Raspberry Pi daughter board [0]. It's an mcp23s17 SPI GPIO port
expander. In doing so, I noticed some errors with the mcp23s08 driver.

This series adds my fixups to (which builds successfully):

	v5.8-13252-gcf4a66ae5e4a

But I have only tested them on (rpi-5.4.y):

	v5.4.51-1078-g92834e4bb4ce

They're quite trivial and backwards compatible, although I might be
wrong about "interrupt-controller". Can someone please confirm?

Many thanks,
Thomas

[0] https://github.com/raspberrypi/linux/pull/3794

Thomas Preston (3):
  pinctrl: mcp23s08: Fixup mcp23x17 regmap_config
  pinctrl: mcp23s08: Remove interrupt-controller
  devicetree: mcp23s08: Remove interrupt-controller

 .../bindings/pinctrl/pinctrl-mcp23s08.txt     |  8 -----
 drivers/pinctrl/pinctrl-mcp23s08.c            | 35 +++++++++----------
 drivers/pinctrl/pinctrl-mcp23s08.h            |  2 +-
 3 files changed, 18 insertions(+), 27 deletions(-)

-- 
2.26.2