Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: o0Ih/1kZZShtLjfCXOjPWwM/n0fD+xOWHutOAdv9/bk4apAyour80EJ5XwCrBi+u3TQJ7KRE1H
 M3jcG2FEHATQ==
IronPort-SDR: M5r5OuFuobbfG2iocEG0ZGktlinSjJyIwvYVBtc1Gx/Qv5BDdy3v0kSQTtkjVA9p0X2U6P5yyV
 jbq6rQCZuIUg==
From:   "Ramuthevar,Vadivel MuruganX" 
        <vadivel.muruganx.ramuthevar@linux.intel.com>
To:     linux-kernel@vger.kernel.org, kishon@ti.com, vkoul@kernel.org
Cc:     gregkh@linuxfoundation.org, robh+dt@kernel.org,
        devicetree@vger.kernel.org, p.zabel@pengutronix.de,
        andriy.shevchenko@intel.com, balbi@kernel.org,
        cheol.yong.kim@intel.com, qi-ming.wu@intel.com, yin1.li@intel.com,
        "Ramuthevar,Vadivel MuruganX" 
        <vadivel.muruganx.ramuthevar@linux.intel.com>
Subject: [PATCH v8 0/2] phy: Add USB PHY support on Intel LGM SoC
Date:   Mon, 17 Aug 2020 11:12:47 +0800
Message-Id: <20200817031249.36795-1-vadivel.muruganx.ramuthevar@linux.intel.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The USB PHY provides the optimized for low power dissipation while active, idle, or on standby.
Requires minimal external components, a single resistor, for best operation.
Supports 10/5-Gbps high-speed data transmission rates through 3-m USB 3.x cable
---
v8:
  - Rebase to V5.9-rc1
v7:
  - No Change
v6:
  - No Change
v5:
  - As per Felipe and Greg's suggestion usb phy driver reviewed patches
    changed the folder from drivers/usb/phy to drivers/phy
  - Reviewed-By tag added in commit message
v4:
  - Andy's review comments addressed
  - drop the excess error debug prints
  - error check optimized
  - merge the split line to one line
v3:
  - Andy's review comments update
  - hardcode return value changed to actual return value from the callee
  - add error check is fixed according to the above
  - correct the assignment in redundant
  - combine the split line into one line
v2:
  - Address Phillip's review comments
  - replace devm_reset_control_get() by devm_reset_control_get_exclusive()
  - re-design the assert and deassert fucntion calls as per review comments
  - address kbuild bot warnings
  - add the comments
v1:
  - initial version

---
dt-bindings: usb: Add USB PHY support for Intel LGM SoC
v8:
  - No Change
v7:
  - Fixed the bot issue: usb-phy@e7e00000: '#phy-cells' is a required property
v6:
  - Fixed the bot issue.
  - replace node-name by usb-phy@ in example
v5:
  - Reviewed-By tag added
v4:
  - No Change
v3:
  - No Change
v2:
  - No Change
v1:
  - initial version

Ramuthevar Vadivel Murugan (2):
  dt-bindings: phy: Add USB PHY support for Intel LGM SoC
  phy: Add USB3 PHY support for Intel LGM SoC

 .../devicetree/bindings/phy/intel,lgm-usb-phy.yaml |  58 +++++
 drivers/phy/Kconfig                                |  11 +
 drivers/phy/Makefile                               |   3 +-
 drivers/phy/phy-lgm-usb.c                          | 278 +++++++++++++++++++++
 4 files changed, 349 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
 create mode 100644 drivers/phy/phy-lgm-usb.c

-- 
2.11.0