Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Krzysztof Kozlowski <krzk@kernel.org>
To:     MyungJoo Ham <myungjoo.ham@samsung.com>,
        Chanwoo Choi <cw00.choi@samsung.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzk@kernel.org>,
        Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>,
        linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v2 07/13] extcon: ptn5150: Lower the noisiness of probe
Date:   Mon, 17 Aug 2020 09:00:03 +0200
Message-Id: <20200817070009.4631-8-krzk@kernel.org>
In-Reply-To: <20200817070009.4631-1-krzk@kernel.org>
References: <20200817070009.4631-1-krzk@kernel.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The ptn5150 driver always prints device type on probe but as raw hex,
without any translation to meaningful description.  This is useful only
for board bring up time so lower the verbosity to debug.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/extcon/extcon-ptn5150.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
index 3b99ad41b06e..a57fef384a29 100644
--- a/drivers/extcon/extcon-ptn5150.c
+++ b/drivers/extcon/extcon-ptn5150.c
@@ -199,8 +199,8 @@ static int ptn5150_init_dev_type(struct ptn5150_info *info)
 	version_id = ((reg_data & PTN5150_REG_DEVICE_ID_VERSION_MASK) >>
 				PTN5150_REG_DEVICE_ID_VERSION_SHIFT);
 
-	dev_info(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n",
-			    version_id, vendor_id);
+	dev_dbg(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n",
+		version_id, vendor_id);
 
 	/* Clear any existing interrupts */
 	ret = regmap_read(info->regmap, PTN5150_REG_INT_STATUS, &reg_data);
-- 
2.17.1