Received: by 2002:a05:6a10:a0d1:0:0:0:0 with SMTP id j17csp2223012pxa; Mon, 17 Aug 2020 04:31:41 -0700 (PDT) X-Google-Smtp-Source: ABdhPJye6Ca2g3AE9ywrSvya1Oc6BC3/YTaxw5mogAD/RqORgkrz5xbOBzAgj011goG2dawFVzIO X-Received: by 2002:a17:906:2b57:: with SMTP id b23mr14292289ejg.26.1597663901222; Mon, 17 Aug 2020 04:31:41 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1597663901; cv=none; d=google.com; s=arc-20160816; b=gBRT6eGopwFv4itV/XnlLwkzd4ehp8IZEXzLAmPlaLIVSiMPufb5TWGjVbnbATujjH Rf7SMUjg+Yh66VRRYeqbmuKOBnyNJGGRusrgtcHYQGWmaeScT9NVsrHBnlrhiKA8IsHC nHz+PkqNahUwMDpquBaGeBwReGy2YaZxfhC63hfxaOcXOVPaL5VT1OWkCyrJai06dM3I upLxzrlGXtJrO73uGZQDktVi4t6N8dnDECLq/tsA0+GdKL16y4DhbKGuCyGb4HgmhoN1 Fs8SNk1SY24ROjKROxped/OnCOjKVMD0wR+JNcyazOJJbnhySAk7tFcR7XAfAZOoScHy C0Qw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=W5slt6h0ldzO6EOg13JTdEA3p2Ph9qj003brJxltDKM=; b=qbHFUAMfQABG++d8d6iZTyURwJYb1T9E9eEEMfFmYFFtVwZfWSmpsNNlLmp7wpC17i Jz63YWcMTyQjZ3fv88jDiIu10SWRcjT2ExrpAhTCHyPFXMcDtHPM5jXCaZD8yHk+n3wX qbJuXrH/nqMivmwTk6AJAxi7NzrCo3BlJXqiwITURhK+GtbGmUKfjSYO08JnCxw1TgbS VXinRQ7/A0VZzZ51ah07IT4ForaGLaCzZB1B6gRsJ/7WVoTcSO6FA6DKird01qsnlOUR tY/XuoxRP8Xikm+cm+AEaXnfH37hRtDxMQ7d0Zp/JFXY/hDGwqfGW5tW0G96IRd7iiBi cpUA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@amazon.com header.s=amazon201209 header.b=gTb3sQEF; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=amazon.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id g22si11001917ejw.97.2020.08.17.04.31.17; Mon, 17 Aug 2020 04:31:41 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@amazon.com header.s=amazon201209 header.b=gTb3sQEF; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=amazon.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728268AbgHQK6B (ORCPT + 99 others); Mon, 17 Aug 2020 06:58:01 -0400 Received: from smtp-fw-4101.amazon.com ([72.21.198.25]:49464 "EHLO smtp-fw-4101.amazon.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727849AbgHQK5e (ORCPT ); Mon, 17 Aug 2020 06:57:34 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amazon.com; i=@amazon.com; q=dns/txt; s=amazon201209; t=1597661842; x=1629197842; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=W5slt6h0ldzO6EOg13JTdEA3p2Ph9qj003brJxltDKM=; b=gTb3sQEFwNlE0FOBLYx8FVYkw6elef0jATFbGR30rQdhSx3g+iNrZYJO RVdGUPbbYtjlyhxnih+N+rtzNS5nPdF8F47ARrdnr2pyP9IsjVn5S6gCO dSgATEbI/YF7v0PhFL1OGSANLNpRJqKAa+XtX1TVeEty3q5pryQRwKO74 I=; X-IronPort-AV: E=Sophos;i="5.76,322,1592870400"; d="scan'208";a="48282337" Received: from iad12-co-svc-p1-lb1-vlan3.amazon.com (HELO email-inbound-relay-2a-e7be2041.us-west-2.amazon.com) ([10.43.8.6]) by smtp-border-fw-out-4101.iad4.amazon.com with ESMTP; 17 Aug 2020 10:56:49 +0000 Received: from EX13MTAUEA001.ant.amazon.com (pdx4-ws-svc-p6-lb7-vlan2.pdx.amazon.com [10.170.41.162]) by email-inbound-relay-2a-e7be2041.us-west-2.amazon.com (Postfix) with ESMTPS id CAE47A0753; Mon, 17 Aug 2020 10:56:36 +0000 (UTC) Received: from EX13D31EUA001.ant.amazon.com (10.43.165.15) by EX13MTAUEA001.ant.amazon.com (10.43.61.82) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Mon, 17 Aug 2020 10:56:35 +0000 Received: from u3f2cd687b01c55.ant.amazon.com (10.43.160.192) by EX13D31EUA001.ant.amazon.com (10.43.165.15) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Mon, 17 Aug 2020 10:56:18 +0000 From: SeongJae Park To: CC: SeongJae Park , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Subject: [PATCH v20 12/15] Documentation: Add documents for DAMON Date: Mon, 17 Aug 2020 12:51:34 +0200 Message-ID: <20200817105137.19296-13-sjpark@amazon.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200817105137.19296-1-sjpark@amazon.com> References: <20200817105137.19296-1-sjpark@amazon.com> MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit X-Originating-IP: [10.43.160.192] X-ClientProxiedBy: EX13D02UWC004.ant.amazon.com (10.43.162.236) To EX13D31EUA001.ant.amazon.com (10.43.165.15) Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: SeongJae Park This commit adds documents for DAMON under `Documentation/admin-guide/mm/damon/` and `Documentation/vm/damon/`. Signed-off-by: SeongJae Park --- Documentation/admin-guide/mm/damon/guide.rst | 157 ++++++++++ Documentation/admin-guide/mm/damon/index.rst | 15 + Documentation/admin-guide/mm/damon/plans.rst | 29 ++ Documentation/admin-guide/mm/damon/start.rst | 96 ++++++ Documentation/admin-guide/mm/damon/usage.rst | 302 +++++++++++++++++++ Documentation/admin-guide/mm/index.rst | 1 + Documentation/vm/damon/api.rst | 20 ++ Documentation/vm/damon/design.rst | 166 ++++++++++ Documentation/vm/damon/eval.rst | 225 ++++++++++++++ Documentation/vm/damon/faq.rst | 58 ++++ Documentation/vm/damon/index.rst | 31 ++ Documentation/vm/index.rst | 1 + 12 files changed, 1101 insertions(+) create mode 100644 Documentation/admin-guide/mm/damon/guide.rst create mode 100644 Documentation/admin-guide/mm/damon/index.rst create mode 100644 Documentation/admin-guide/mm/damon/plans.rst create mode 100644 Documentation/admin-guide/mm/damon/start.rst create mode 100644 Documentation/admin-guide/mm/damon/usage.rst create mode 100644 Documentation/vm/damon/api.rst create mode 100644 Documentation/vm/damon/design.rst create mode 100644 Documentation/vm/damon/eval.rst create mode 100644 Documentation/vm/damon/faq.rst create mode 100644 Documentation/vm/damon/index.rst diff --git a/Documentation/admin-guide/mm/damon/guide.rst b/Documentation/admin-guide/mm/damon/guide.rst new file mode 100644 index 000000000000..c51fb843efaa --- /dev/null +++ b/Documentation/admin-guide/mm/damon/guide.rst @@ -0,0 +1,157 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================== +Optimization Guide +================== + +This document helps you estimating the amount of benefit that you could get +from DAMON-based optimizations, and describes how you could achieve it. You +are assumed to already read :doc:`start`. + + +Check The Signs +=============== + +No optimization can provide same extent of benefit to every case. Therefore +you should first guess how much improvements you could get using DAMON. If +some of below conditions match your situation, you could consider using DAMON. + +- *Low IPC and High Cache Miss Ratios.* Low IPC means most of the CPU time is + spent waiting for the completion of time-consuming operations such as memory + access, while high cache miss ratios mean the caches don't help it well. + DAMON is not for cache level optimization, but DRAM level. However, + improving DRAM management will also help this case by reducing the memory + operation latency. +- *Memory Over-commitment and Unknown Users.* If you are doing memory + overcommitment and you cannot control every user of your system, a memory + bank run could happen at any time. You can estimate when it will happen + based on DAMON's monitoring results and act earlier to avoid or deal better + with the crisis. +- *Frequent Memory Pressure.* Frequent memory pressure means your system has + wrong configurations or memory hogs. DAMON will help you find the right + configuration and/or the criminals. +- *Heterogeneous Memory System.* If your system is utilizing memory devices + that placed between DRAM and traditional hard disks, such as non-volatile + memory or fast SSDs, DAMON could help you utilizing the devices more + efficiently. + + +Profile +======= + +If you found some positive signals, you could start by profiling your workloads +using DAMON. Find major workloads on your systems and analyze their data +access pattern to find something wrong or can be improved. The DAMON user +space tool (``damo``) will be useful for this. + +We recommend you to start from working set size distribution check using ``damo +report wss``. If the distribution is ununiform or quite different from what +you estimated, you could consider `Memory Configuration`_ optimization. + +Then, review the overall access pattern in heatmap form using ``damo report +heats``. If it shows a simple pattern consists of a small number of memory +regions having high contrast of access temperature, you could consider manual +`Program Modification`_. + +If you still want to absorb more benefits, you should develop `Personalized +DAMON Application`_ for your special case. + +You don't need to take only one approach among the above plans, but you could +use multiple of the above approaches to maximize the benefit. + + +Optimize +======== + +If the profiling result also says it's worth trying some optimization, you +could consider below approaches. Note that some of the below approaches assume +that your systems are configured with swap devices or other types of auxiliary +memory so that you don't strictly required to accommodate the whole working set +in the main memory. Most of the detailed optimization should be made on your +concrete understanding of your memory devices. + + +Memory Configuration +-------------------- + +No more no less, DRAM should be large enough to accommodate only important +working sets, because DRAM is highly performance critical but expensive and +heavily consumes the power. However, knowing the size of the real important +working sets is difficult. As a consequence, people usually equips +unnecessarily large or too small DRAM. Many problems stem from such wrong +configurations. + +Using the working set size distribution report provided by ``damo report wss``, +you can know the appropriate DRAM size for you. For example, roughly speaking, +if you worry about only 95 percentile latency, you don't need to equip DRAM of +a size larger than 95 percentile working set size. + +Let's see a real example. This `page +`_ +shows the heatmap and the working set size distributions/changes of +``freqmine`` workload in PARSEC3 benchmark suite. The working set size spikes +up to 180 MiB, but keeps smaller than 50 MiB for more than 95% of the time. +Even though you give only 50 MiB of memory space to the workload, it will work +well for 95% of the time. Meanwhile, you can save the 130 MiB of memory space. + + +Program Modification +-------------------- + +If the data access pattern heatmap plotted by ``damo report heats`` is quite +simple so that you can understand how the things are going in the workload with +your human eye, you could manually optimize the memory management. + +For example, suppose that the workload has two big memory object but only one +object is frequently accessed while the other one is only occasionally +accessed. Then, you could modify the program source code to keep the hot +object in the main memory by invoking ``mlock()`` or ``madvise()`` with +``MADV_WILLNEED``. Or, you could proactively evict the cold object using +``madvise()`` with ``MADV_COLD`` or ``MADV_PAGEOUT``. Using both together +would be also worthy. + +A research work [1]_ using the ``mlock()`` achieved up to 2.55x performance +speedup. + +Let's see another realistic example access pattern for this kind of +optimizations. This `page +`_ +shows the visualized access patterns of streamcluster workload in PARSEC3 +benchmark suite. We can easily identify the 100 MiB sized hot object. + + +Personalized DAMON Application +------------------------------ + +Above approaches will work well for many general cases, but would not enough +for some special cases. + +If this is the case, it might be the time to forget the comfortable use of the +user space tool and dive into the debugfs interface (refer to :doc:`usage` for +the detail) of DAMON. Using the interface, you can control the DAMON more +flexibly. Therefore, you can write your personalized DAMON application that +controls the monitoring via the debugfs interface, analyzes the result, and +applies complex optimizations itself. Using this, you can make more creative +and wise optimizations. + +If you are a kernel space programmer, writing kernel space DAMON applications +using the API (refer to the :doc:`/vm/damon/api` for more detail) would be an +option. + + +Reference Practices +=================== + +Referencing previously done successful practices could help you getting the +sense for this kind of optimizations. There is an academic paper [1]_ +reporting the visualized access pattern and manual `Program +Modification`_ results for a number of realistic workloads. You can also get +the visualized access patterns [3]_ [4]_ [5]_ and automated DAMON-based memory +operations results for other realistic workloads that collected with latest +version of DAMON [2]_ . + +.. [1] https://dl.acm.org/doi/10.1145/3366626.3368125 +.. [2] https://damonitor.github.io/test/result/perf/latest/html/ +.. [3] https://damonitor.github.io/test/result/visual/latest/rec.heatmap.1.png.html +.. [4] https://damonitor.github.io/test/result/visual/latest/rec.wss_sz.png.html +.. [5] https://damonitor.github.io/test/result/visual/latest/rec.wss_time.png.html diff --git a/Documentation/admin-guide/mm/damon/index.rst b/Documentation/admin-guide/mm/damon/index.rst new file mode 100644 index 000000000000..0baae7a5402b --- /dev/null +++ b/Documentation/admin-guide/mm/damon/index.rst @@ -0,0 +1,15 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================== +Monitoring Data Accesses +======================== + +:doc:`DAMON ` allows light-weight data access monitoring. +Using this, users can analyze and optimize their systems. + +.. toctree:: + :maxdepth: 2 + + start + guide + usage diff --git a/Documentation/admin-guide/mm/damon/plans.rst b/Documentation/admin-guide/mm/damon/plans.rst new file mode 100644 index 000000000000..e3aa5ab96c29 --- /dev/null +++ b/Documentation/admin-guide/mm/damon/plans.rst @@ -0,0 +1,29 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============ +Future Plans +============ + +DAMON is still on its first stage. Below plans are still under development. + + +Automate Data Access Monitoring-based Memory Operation Schemes Execution +======================================================================== + +The ultimate goal of DAMON is to be used as a building block for the data +access pattern aware kernel memory management optimization. It will make +system just works efficiently. However, some users having very special +workloads will want to further do their own optimization. DAMON will automate +most of the tasks for such manual optimizations in near future. Users will be +required to only describe what kind of data access pattern-based operation +schemes they want in a simple form. + +By applying a very simple scheme for THP promotion/demotion with a prototype +implementation, DAMON reduced 60% of THP memory footprint overhead while +preserving 50% of the THP performance benefit. The detailed results can be +seen on an external web page [1]_. + +Several RFC patchsets for this plan are available [2]_. + +.. [1] https://damonitor.github.io/test/result/perf/latest/html/ +.. [2] https://lore.kernel.org/linux-mm/20200616073828.16509-1-sjpark@amazon.com/ diff --git a/Documentation/admin-guide/mm/damon/start.rst b/Documentation/admin-guide/mm/damon/start.rst new file mode 100644 index 000000000000..deed2ea2321e --- /dev/null +++ b/Documentation/admin-guide/mm/damon/start.rst @@ -0,0 +1,96 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +Getting Started +=============== + +This document briefly describes how you can use DAMON by demonstrating its +default user space tool. Please note that this document describes only a part +of its features for brevity. Please refer to :doc:`usage` for more details. + + +TL; DR +====== + +Follow below 5 commands to monitor and visualize the access pattern of your +workload. :: + + $ git clone https://github.com/sjp38/linux -b damon/master + /* build the kernel with CONFIG_DAMON=y, install, reboot */ + $ mount -t debugfs none /sys/kernel/debug/ + $ cd linux/tools/damon + $ ./damo record $(pidof ) + $ ./damo report heats --heatmap access_pattern.png + + +Prerequisites +============= + +Kernel +------ + +You should first ensure your system is running on a kernel built with +``CONFIG_DAMON=y``. + + +User Space Tool +--------------- + +For the demonstration, we will use the default user space tool for DAMON, +called DAMON Operator (DAMO). It is located at ``tools/damon/damo`` of the +kernel source tree. For brevity, below examples assume you set ``$PATH`` to +point it. It's not mandatory, though. + +Because DAMO is using the debugfs interface (refer to :doc:`usage` for the +detail) of DAMON, you should ensure debugfs is mounted. Mount it manually as +below:: + + # mount -t debugfs none /sys/kernel/debug/ + +or append below line to your ``/etc/fstab`` file so that your system can +automatically mount debugfs from next booting:: + + debugfs /sys/kernel/debug debugfs defaults 0 0 + + +Recording Data Access Patterns +============================== + +Below commands record memory access pattern of a program and save the +monitoring results in a file. :: + + $ git clone https://github.com/sjp38/masim + $ cd masim; make; ./masim ./configs/zigzag.cfg & + $ sudo damo record -o damon.data $(pidof masim) + +The first two lines of the commands get an artificial memory access generator +program and runs it in the background. It will repeatedly access two 100 MiB +sized memory regions one by one. You can substitute this with your real +workload. The last line asks ``damo`` to record the access pattern in +``damon.data`` file. + + +Visualizing Recorded Patterns +============================= + +Below three commands visualize the recorded access patterns into three +image files. :: + + $ damo report heats --heatmap access_pattern_heatmap.png + $ damo report wss --range 0 101 1 --plot wss_dist.png + $ damo report wss --range 0 101 1 --sortby time --plot wss_chron_change.png + +- ``access_pattern_heatmap.png`` will show the data access pattern in a + heatmap, which shows when (x-axis) what memory region (y-axis) is how + frequently accessed (color). +- ``wss_dist.png`` will show the distribution of the working set size. +- ``wss_chron_change.png`` will show how the working set size has + chronologically changed. + +You can show the images in a web page [1]_ . Those made with other realistic +workloads are also available [2]_ [3]_ [4]_. + +.. [1] https://damonitor.github.io/doc/html/v17/admin-guide/mm/damon/start.html#visualizing-recorded-patterns +.. [2] https://damonitor.github.io/test/result/visual/latest/rec.heatmap.1.png.html +.. [3] https://damonitor.github.io/test/result/visual/latest/rec.wss_sz.png.html +.. [4] https://damonitor.github.io/test/result/visual/latest/rec.wss_time.png.html diff --git a/Documentation/admin-guide/mm/damon/usage.rst b/Documentation/admin-guide/mm/damon/usage.rst new file mode 100644 index 000000000000..a6606d27a559 --- /dev/null +++ b/Documentation/admin-guide/mm/damon/usage.rst @@ -0,0 +1,302 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +Detailed Usages +=============== + +DAMON provides below three interfaces for different users. + +- *DAMON user space tool.* + This is for privileged people such as system administrators who want a + just-working human-friendly interface. Using this, users can use the DAMON’s + major features in a human-friendly way. It may not be highly tuned for + special cases, though. It supports only virtual address spaces monitoring. +- *debugfs interface.* + This is for privileged user space programmers who want more optimized use of + DAMON. Using this, users can use DAMON’s major features by reading + from and writing to special debugfs files. Therefore, you can write and use + your personalized DAMON debugfs wrapper programs that reads/writes the + debugfs files instead of you. The DAMON user space tool is also a reference + implementation of such programs. It supports only virtual address spaces + monitoring. +- *Kernel Space Programming Interface.* + This is for kernel space programmers. Using this, users can utilize every + feature of DAMON most flexibly and efficiently by writing kernel space + DAMON application programs for you. You can even extend DAMON for various + address spaces. + +This document does not describe the kernel space programming interface in +detail. For that, please refer to the :doc:`/vm/damon/api`. + + +DAMON User Space Tool +===================== + +A reference implementation of the DAMON user space tools which provides a +convenient user interface is in the kernel source tree. It is located at +``tools/damon/damo`` of the tree. + +The tool provides a subcommands based interface. Every subcommand provides +``-h`` option, which provides the minimal usage of it. Currently, the tool +supports two subcommands, ``record`` and ``report``. + +Below example commands assume you set ``$PATH`` to point ``tools/damon/`` for +brevity. It is not mandatory for use of ``damo``, though. + + +Recording Data Access Pattern +----------------------------- + +The ``record`` subcommand records the data access pattern of target workloads +in a file (``./damon.data`` by default). You can specify the target with 1) +the command for execution of the monitoring target process, or 2) pid of +running target process. Below example shows a command target usage:: + + # cd /tools/damon/ + # damo record "sleep 5" + +The tool will execute ``sleep 5`` by itself and record the data access patterns +of the process. Below example shows a pid target usage:: + + # sleep 5 & + # damo record `pidof sleep` + +The location of the recorded file can be explicitly set using ``-o`` option. +You can further tune this by setting the monitoring attributes. To know about +the monitoring attributes in detail, please refer to the +:doc:`/vm/damon/design`. + + +Analyzing Data Access Pattern +----------------------------- + +The ``report`` subcommand reads a data access pattern record file (if not +explicitly specified using ``-i`` option, reads ``./damon.data`` file by +default) and generates human-readable reports. You can specify what type of +report you want using a sub-subcommand to ``report`` subcommand. ``raw``, +``heats``, and ``wss`` report types are supported for now. + + +raw +~~~ + +``raw`` sub-subcommand simply transforms the binary record into a +human-readable text. For example:: + + $ damo report raw + start_time: 193485829398 + rel time: 0 + nr_tasks: 1 + target_id: 1348 + nr_regions: 4 + 560189609000-56018abce000( 22827008): 0 + 7fbdff59a000-7fbdffaf1a00( 5601792): 0 + 7fbdffaf1a00-7fbdffbb5000( 800256): 1 + 7ffea0dc0000-7ffea0dfd000( 249856): 0 + + rel time: 100000731 + nr_tasks: 1 + target_id: 1348 + nr_regions: 6 + 560189609000-56018abce000( 22827008): 0 + 7fbdff59a000-7fbdff8ce933( 3361075): 0 + 7fbdff8ce933-7fbdffaf1a00( 2240717): 1 + 7fbdffaf1a00-7fbdffb66d99( 480153): 0 + 7fbdffb66d99-7fbdffbb5000( 320103): 1 + 7ffea0dc0000-7ffea0dfd000( 249856): 0 + +The first line shows the recording started timestamp (nanosecond). Records of +data access patterns follows. Each record is separated by a blank line. Each +record first specifies the recorded time (``rel time``) in relative to the +start time, the number of monitored tasks in this record (``nr_tasks``). +Recorded data access patterns of each task follow. Each data access pattern +for each task shows the target's pid (``target_id``) and a number of monitored +address regions in this access pattern (``nr_regions``) first. After that, +each line shows the start/end address, size, and the number of observed +accesses of each region. + + +heats +~~~~~ + +The ``raw`` output is very detailed but hard to manually read. ``heats`` +sub-subcommand plots the data in 3-dimensional form, which represents the time +in x-axis, address of regions in y-axis, and the access frequency in z-axis. +Users can set the resolution of the map (``--tres`` and ``--ares``) and +start/end point of each axis (``--tmin``, ``--tmax``, ``--amin``, and +``--amax``) via optional arguments. For example:: + + $ damo report heats --tres 3 --ares 3 + 0 0 0.0 + 0 7609002 0.0 + 0 15218004 0.0 + 66112620851 0 0.0 + 66112620851 7609002 0.0 + 66112620851 15218004 0.0 + 132225241702 0 0.0 + 132225241702 7609002 0.0 + 132225241702 15218004 0.0 + +This command shows a recorded access pattern in heatmap of 3x3 resolution. +Therefore it shows 9 data points in total. Each line shows each of the data +points. The three numbers in each line represent time in nanosecond, address, +and the observed access frequency. + +Users will be able to convert this text output into a heatmap image (represents +z-axis values with colors) or other 3D representations using various tools such +as 'gnuplot'. For more convenience, ``heats`` sub-subcommand provides the +'gnuplot' based heatmap image creation. For this, you can use ``--heatmap`` +option. Also, note that because it uses 'gnuplot' internally, it will fail if +'gnuplot' is not installed on your system. For example:: + + $ ./damo report heats --heatmap heatmap.png + +Creates the heatmap image in ``heatmap.png`` file. It supports ``pdf``, +``png``, ``jpeg``, and ``svg``. + +If the target address space is virtual memory address space and you plot the +entire address space, the huge unmapped regions will make the picture looks +only black. Therefore you should do proper zoom in / zoom out using the +resolution and axis boundary-setting arguments. To make this effort minimal, +you can use ``--guide`` option as below:: + + $ ./damo report heats --guide + target_id:1348 + time: 193485829398-198337863555 (4852034157) + region 0: 00000094564599762944-00000094564622589952 (22827008) + region 1: 00000140454009610240-00000140454016012288 (6402048) + region 2: 00000140731597193216-00000140731597443072 (249856) + +The output shows unions of monitored regions (start and end addresses in byte) +and the union of monitored time duration (start and end time in nanoseconds) of +each target task. Therefore, it would be wise to plot the data points in each +union. If no axis boundary option is given, it will automatically find the +biggest union in ``--guide`` output and set the boundary in it. + + +wss +~~~ + +The ``wss`` type extracts the distribution and chronological working set size +changes from the records. For example:: + + $ ./damo report wss + # + # target_id 1348 + # avr: 66228 + 0 0 + 25 0 + 50 0 + 75 0 + 100 1920615 + +Without any option, it shows the distribution of the working set sizes as +above. It shows 0th, 25th, 50th, 75th, and 100th percentile and the average of +the measured working set sizes in the access pattern records. In this case, +the working set size was zero for 75th percentile but 1,920,615 bytes in max +and 66,228 bytes on average. + +By setting the sort key of the percentile using '--sortby', you can show how +the working set size has chronologically changed. For example:: + + $ ./damo report wss --sortby time + # + # target_id 1348 + # avr: 66228 + 0 0 + 25 0 + 50 0 + 75 0 + 100 0 + +The average is still 66,228. And, because the access was spiked in very short +duration and this command plots only 4 data points, we cannot show when the +access spikes made. Users can specify the resolution of the distribution +(``--range``). By giving more fine resolution, the short duration spikes could +be found. + +Similar to that of ``heats --heatmap``, it also supports 'gnuplot' based simple +visualization of the distribution via ``--plot`` option. + + +debugfs Interface +================= + +DAMON exports four files, ``attrs``, ``target_ids``, ``record``, and +``monitor_on`` under its debugfs directory, ``/damon/``. + + +Attributes +---------- + +Users can get and set the ``sampling interval``, ``aggregation interval``, +``regions update interval``, and min/max number of monitoring target regions by +reading from and writing to the ``attrs`` file. To know about the monitoring +attributes in detail, please refer to the :doc:`/vm/damon/design`. For +example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10 and +1000, and then check it again:: + + # cd /damon + # echo 5000 100000 1000000 10 1000 > attrs + # cat attrs + 5000 100000 1000000 10 1000 + + +Target IDs +---------- + +Some types of address spaces supports multiple monitoring target. For example, +the virtual memory address spaces monitoring can have multiple processes as the +monitoring targets. Users can set the targets by writing relevant id values of +the targets to, and get the ids of the current targets by reading from the +``target_ids`` file. In case of the virtual address spaces monitoring, the +values should be pids of the monitoring target processes. For example, below +commands set processes having pids 42 and 4242 as the monitoring targets and +check it again:: + + # cd /damon + # echo 42 4242 > target_ids + # cat target_ids + 42 4242 + +Note that setting the target ids doesn't start the monitoring. + + +Record +------ + +This debugfs file allows you to record monitored access patterns in a regular +binary file. The recorded results are first written in an in-memory buffer and +flushed to a file in batch. Users can get and set the size of the buffer and +the path to the result file by reading from and writing to the ``record`` file. +For example, below commands set the buffer to be 4 KiB and the result to be +saved in ``/damon.data``. :: + + # cd /damon + # echo "4096 /damon.data" > record + # cat record + 4096 /damon.data + +The recording can be disabled by setting the buffer size zero. + + +Turning On/Off +-------------- + +Setting the files as described above doesn't incur effect unless you explicitly +start the monitoring. You can start, stop, and check the current status of the +monitoring by writing to and reading from the ``monitor_on`` file. Writing +``on`` to the file starts the monitoring of the targets with the attributes. +Writing ``off`` to the file stops those. DAMON also stops if every target +process is terminated. Below example commands turn on, off, and check the +status of DAMON:: + + # cd /damon + # echo on > monitor_on + # echo off > monitor_on + # cat monitor_on + off + +Please note that you cannot write to the above-mentioned debugfs files while +the monitoring is turned on. If you write to the files while DAMON is running, +an error code such as ``-EBUSY`` will be returned. diff --git a/Documentation/admin-guide/mm/index.rst b/Documentation/admin-guide/mm/index.rst index 11db46448354..e6de5cd41945 100644 --- a/Documentation/admin-guide/mm/index.rst +++ b/Documentation/admin-guide/mm/index.rst @@ -27,6 +27,7 @@ the Linux memory management. concepts cma_debugfs + damon/index hugetlbpage idle_page_tracking ksm diff --git a/Documentation/vm/damon/api.rst b/Documentation/vm/damon/api.rst new file mode 100644 index 000000000000..649409828eab --- /dev/null +++ b/Documentation/vm/damon/api.rst @@ -0,0 +1,20 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============= +API Reference +============= + +Kernel space programs can use every feature of DAMON using below APIs. All you +need to do is including ``damon.h``, which is located in ``include/linux/`` of +the source tree. + +Structures +========== + +.. kernel-doc:: include/linux/damon.h + + +Functions +========= + +.. kernel-doc:: mm/damon.c diff --git a/Documentation/vm/damon/design.rst b/Documentation/vm/damon/design.rst new file mode 100644 index 000000000000..727d72093f8f --- /dev/null +++ b/Documentation/vm/damon/design.rst @@ -0,0 +1,166 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====== +Design +====== + +Configurable Layers +=================== + +DAMON provides data access monitoring functionality while making the accuracy +and the overhead controllable. The fundamental access monitorings require +primitives that dependent on and optimized for the target address space. On +the other hand, the accuracy and overhead tradeoff mechanism, which is the core +of DAMON, is in the pure logic space. DAMON separates the two parts in +different layers and defines its interface to allow various low level +primitives implementations configurable with the core logic. + +Due to this separated design and the configurable interface, users can extend +DAMON for any address space by configuring the core logics with appropriate low +level primitive implementations. If appropriate one is not provided, users can +implement the primitives on their own. + +For example, physical memory, virtual memory, swap space, those for specific +processes, NUMA nodes, files, and backing memory devices would be supportable. +Also, if some architectures or devices support special optimized access check +primitives, those will be easily configurable. + + +Reference Implementations of Address Space Specific Primitives +============================================================== + +The low level primitives for the fundamental access monitoring are defined in +two parts: + +1. Identification of the monitoring target address range for the address space. +2. Access check of specific address range in the target space. + +DAMON currently provides the implementation of the primitives for only the +virtual address spaces. Below two subsections describe how it works. + + +PTE Accessed-bit Based Access Check +----------------------------------- + +The implementation for the virtual address space uses PTE Accessed-bit for +basic access checks. It finds the relevant PTE Accessed bit from the address +by walking the page table for the target task of the address. In this way, the +implementation finds and clears the bit for next sampling target address and +checks whether the bit set again after one sampling period. This could disturb +other kernel subsystems using the Accessed bits, namely Idle page tracking and +the reclaim logic. To avoid such disturbances, DAMON makes it mutually +exclusive with Idle page tracking and uses ``PG_idle`` and ``PG_young`` page +flags to solve the conflict with the reclaim logic, as Idle page tracking does. + + +VMA-based Target Address Range Construction +------------------------------------------- + +Only small parts in the super-huge virtual address space of the processes are +mapped to the physical memory and accessed. Thus, tracking the unmapped +address regions is just wasteful. However, because DAMON can deal with some +level of noise using the adaptive regions adjustment mechanism, tracking every +mapping is not strictly required but could even incur a high overhead in some +cases. That said, too huge unmapped areas inside the monitoring target should +be removed to not take the time for the adaptive mechanism. + +For the reason, this implementation converts the complex mappings to three +distinct regions that cover every mapped area of the address space. The two +gaps between the three regions are the two biggest unmapped areas in the given +address space. The two biggest unmapped areas would be the gap between the +heap and the uppermost mmap()-ed region, and the gap between the lowermost +mmap()-ed region and the stack in most of the cases. Because these gaps are +exceptionally huge in usual address spaces, excluding these will be sufficient +to make a reasonable trade-off. Below shows this in detail:: + + + + + (small mmap()-ed regions and munmap()-ed regions) + + + + + +Address Space Independent Core Mechanisms +========================================= + +Below four sections describe each of the DAMON core mechanisms and the five +monitoring attributes, ``sampling interval``, ``aggregation interval``, +``regions update interval``, ``minimum number of regions``, and ``maximum +number of regions``. + + +Access Frequency Monitoring +--------------------------- + +The output of DAMON says what pages are how frequently accessed for a given +duration. The resolution of the access frequency is controlled by setting +``sampling interval`` and ``aggregation interval``. In detail, DAMON checks +access to each page per ``sampling interval`` and aggregates the results. In +other words, counts the number of the accesses to each page. After each +``aggregation interval`` passes, DAMON calls callback functions that previously +registered by users so that users can read the aggregated results and then +clears the results. This can be described in below simple pseudo-code:: + + while monitoring_on: + for page in monitoring_target: + if accessed(page): + nr_accesses[page] += 1 + if time() % aggregation_interval == 0: + for callback in user_registered_callbacks: + callback(monitoring_target, nr_accesses) + for page in monitoring_target: + nr_accesses[page] = 0 + sleep(sampling interval) + +The monitoring overhead of this mechanism will arbitrarily increase as the +size of the target workload grows. + + +Region Based Sampling +--------------------- + +To avoid the unbounded increase of the overhead, DAMON groups adjacent pages +that assumed to have the same access frequencies into a region. As long as the +assumption (pages in a region have the same access frequencies) is kept, only +one page in the region is required to be checked. Thus, for each ``sampling +interval``, DAMON randomly picks one page in each region, waits for one +``sampling interval``, checks whether the page is accessed meanwhile, and +increases the access frequency of the region if so. Therefore, the monitoring +overhead is controllable by setting the number of regions. DAMON allows users +to set the minimum and the maximum number of regions for the trade-off. + +This scheme, however, cannot preserve the quality of the output if the +assumption is not guaranteed. + + +Adaptive Regions Adjustment +--------------------------- + +Even somehow the initial monitoring target regions are well constructed to +fulfill the assumption (pages in same region have similar access frequencies), +the data access pattern can be dynamically changed. This will result in low +monitoring quality. To keep the assumption as much as possible, DAMON +adaptively merges and splits each region based on their access frequency. + +For each ``aggregation interval``, it compares the access frequencies of +adjacent regions and merges those if the frequency difference is small. Then, +after it reports and clears the aggregated access frequency of each region, it +splits each region into two or three regions if the total number of regions +will not exceed the user-specified maximum number of regions after the split. + +In this way, DAMON provides its best-effort quality and minimal overhead while +keeping the bounds users set for their trade-off. + + +Dynamic Target Space Updates Handling +------------------------------------- + +The monitoring target address range could dynamically changed. For example, +virtual memory could be dynamically mapped and unmapped. Physical memory could +be hot-plugged. + +As the changes could be quite frequent in some cases, DAMON checks the dynamic +memory mapping changes and applies it to the abstracted target area only for +each of a user-specified time interval (``regions update interval``). diff --git a/Documentation/vm/damon/eval.rst b/Documentation/vm/damon/eval.rst new file mode 100644 index 000000000000..cb80c63c3ed2 --- /dev/null +++ b/Documentation/vm/damon/eval.rst @@ -0,0 +1,225 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========== +Evaluation +========== + +DAMON is lightweight. It increases system memory usage by 0.12% and slows +target workloads down by 1.39%. + +DAMON is accurate and useful for memory management optimizations. An +experimental DAMON-based operation scheme for THP, 'ethp', removes 88.16% of +THP memory overheads while preserving 88.73% of THP speedup. Another +experimental DAMON-based 'proactive reclamation' implementation, 'prcl', +reduces 91.34% of residential sets and 25.59% of system memory footprint while +incurring only 1.58% runtime overhead in the best case (parsec3/freqmine). + + +Setup +===== + +On QEMU/KVM based virtual machines utilizing 130GB of RAM and 36 vCPUs hosted +by AWS EC2 i3.metal instances that running a kernel that v20 DAMON patchset is +applied, I measure runtime and consumed system memory while running various +realistic workloads with several configurations. I use 13 and 12 workloads in +PARSEC3 [3]_ and SPLASH-2X [4]_ benchmark suites, respectively. I use another +wrapper scripts [5]_ for convenient setup and run of the workloads. + + +Measurement +----------- + +For the measurement of the amount of consumed memory in system global scope, I +drop caches before starting each of the workloads and monitor 'MemFree' in the +'/proc/meminfo' file. To make results more stable, I repeat the runs 5 times +and average results. + + +Configurations +-------------- + +The configurations I use are as below. + +- orig: Linux v5.8 with 'madvise' THP policy +- rec: 'orig' plus DAMON running with virtual memory access recording +- prec: 'orig' plus DAMON running with physical memory access recording +- thp: same with 'orig', but use 'always' THP policy +- ethp: 'orig' plus a DAMON operation scheme, 'efficient THP' +- prcl: 'orig' plus a DAMON operation scheme, 'proactive reclaim [6]_' + +I use 'rec' for measurement of DAMON overheads to target workloads and system +memory. 'prec' is for physical memory monitroing and recording. It monitors +17GB sized 'System RAM' region. The remaining configs including 'thp', 'ethp', +and 'prcl' are for measurement of DAMON monitoring accuracy. + +'ethp' and 'prcl' are simple DAMON-based operation schemes developed for +proof of concepts of DAMON. 'ethp' reduces memory space waste of THP by using +DAMON for the decision of promotions and demotion for huge pages, while 'prcl' +is as similar as the original work. Those are implemented as below:: + + # format: + # ethp: Use huge pages if a region shows >=5% access rate, use regular + # pages if a region >=2MB shows 0 access rate for >=7 seconds + min max 5 max min max hugepage + 2M max min min 7s max nohugepage + + # prcl: If a region >=4KB shows 0 access rate for >=10 seconds, page out. + 4K max 0 0 10s max pageout + +Note that both 'ethp' and 'prcl' are designed with my only straightforward +intuition because those are for only proof of concepts and monitoring accuracy +of DAMON. In other words, those are not for production. For production use, +those should be more tuned. + +.. [1] "Redis latency problems troubleshooting", https://redis.io/topics/latency +.. [2] "Disable Transparent Huge Pages (THP)", + https://docs.mongodb.com/manual/tutorial/transparent-huge-pages/ +.. [3] "The PARSEC Becnhmark Suite", https://parsec.cs.princeton.edu/index.htm +.. [4] "SPLASH-2x", https://parsec.cs.princeton.edu/parsec3-doc.htm#splash2x +.. [5] "parsec3_on_ubuntu", https://github.com/sjp38/parsec3_on_ubuntu +.. [6] "Proactively reclaiming idle memory", https://lwn.net/Articles/787611/ + + +Results +======= + +Below two tables show the measurement results. The runtimes are in seconds +while the memory usages are in KiB. Each configuration except 'orig' shows +its overhead relative to 'orig' in percent within parenthesizes.:: + + runtime orig rec (overhead) prec (overhead) thp (overhead) ethp (overhead) prcl (overhead) + parsec3/blackscholes 137.688 139.910 (1.61) 138.226 (0.39) 138.524 (0.61) 138.548 (0.62) 150.562 (9.35) + parsec3/bodytrack 124.496 123.294 (-0.97) 124.482 (-0.01) 124.874 (0.30) 123.514 (-0.79) 126.380 (1.51) + parsec3/canneal 196.513 209.465 (6.59) 223.213 (13.59) 189.302 (-3.67) 199.453 (1.50) 242.217 (23.26) + parsec3/dedup 18.060 18.128 (0.38) 18.378 (1.76) 18.210 (0.83) 18.397 (1.87) 20.545 (13.76) + parsec3/facesim 343.697 344.917 (0.36) 341.367 (-0.68) 337.696 (-1.75) 344.805 (0.32) 361.169 (5.08) + parsec3/ferret 288.868 286.110 (-0.95) 292.308 (1.19) 287.814 (-0.36) 284.243 (-1.60) 284.200 (-1.62) + parsec3/fluidanimate 342.267 337.743 (-1.32) 330.680 (-3.39) 337.356 (-1.43) 340.604 (-0.49) 343.565 (0.38) + parsec3/freqmine 437.385 436.854 (-0.12) 437.641 (0.06) 435.008 (-0.54) 436.998 (-0.09) 444.276 (1.58) + parsec3/raytrace 183.036 182.039 (-0.54) 184.859 (1.00) 187.330 (2.35) 185.660 (1.43) 209.707 (14.57) + parsec3/streamcluster 611.075 675.108 (10.48) 656.373 (7.41) 541.711 (-11.35) 473.679 (-22.48) 815.450 (33.45) + parsec3/swaptions 220.338 220.948 (0.28) 220.891 (0.25) 220.387 (0.02) 219.986 (-0.16) -100.000 (0.00) + parsec3/vips 87.710 88.581 (0.99) 88.423 (0.81) 88.460 (0.86) 88.471 (0.87) 89.661 (2.22) + parsec3/x264 114.927 117.774 (2.48) 116.630 (1.48) 112.237 (-2.34) 110.709 (-3.67) 124.560 (8.38) + splash2x/barnes 131.034 130.895 (-0.11) 129.088 (-1.48) 118.213 (-9.78) 124.497 (-4.99) 167.966 (28.19) + splash2x/fft 59.805 60.237 (0.72) 59.895 (0.15) 47.008 (-21.40) 57.962 (-3.08) 87.183 (45.78) + splash2x/lu_cb 132.353 132.157 (-0.15) 132.473 (0.09) 131.561 (-0.60) 135.541 (2.41) 141.720 (7.08) + splash2x/lu_ncb 149.050 150.496 (0.97) 151.912 (1.92) 150.974 (1.29) 148.329 (-0.48) 152.227 (2.13) + splash2x/ocean_cp 82.189 77.735 (-5.42) 84.466 (2.77) 77.498 (-5.71) 82.586 (0.48) 113.737 (38.38) + splash2x/ocean_ncp 154.934 154.656 (-0.18) 164.204 (5.98) 101.861 (-34.26) 142.600 (-7.96) 281.650 (81.79) + splash2x/radiosity 142.710 141.643 (-0.75) 143.940 (0.86) 141.982 (-0.51) 142.017 (-0.49) 152.116 (6.59) + splash2x/radix 50.357 50.331 (-0.05) 50.717 (0.72) 45.664 (-9.32) 50.222 (-0.27) 73.981 (46.91) + splash2x/raytrace 134.039 132.650 (-1.04) 134.583 (0.41) 131.570 (-1.84) 133.050 (-0.74) 141.463 (5.54) + splash2x/volrend 120.769 120.220 (-0.45) 119.895 (-0.72) 120.159 (-0.50) 119.311 (-1.21) 119.581 (-0.98) + splash2x/water_nsquared 376.599 373.411 (-0.85) 382.601 (1.59) 348.701 (-7.41) 357.033 (-5.20) 397.427 (5.53) + splash2x/water_spatial 132.619 133.432 (0.61) 135.505 (2.18) 134.865 (1.69) 133.940 (1.00) 148.196 (11.75) + total 4772.510 4838.740 (1.39) 4862.740 (1.89) 4568.970 (-4.26) 4592.160 (-3.78) 5189.560 (8.74) + + + memused.avg orig rec (overhead) prec (overhead) thp (overhead) ethp (overhead) prcl (overhead) + parsec3/blackscholes 1825022.800 1863815.200 (2.13) 1830082.000 (0.28) 1800999.800 (-1.32) 1807743.800 (-0.95) 1580027.800 (-13.42) + parsec3/bodytrack 1425506.800 1438323.400 (0.90) 1439260.600 (0.96) 1400505.600 (-1.75) 1412295.200 (-0.93) 1412759.600 (-0.89) + parsec3/canneal 1040902.600 1050404.000 (0.91) 1053535.200 (1.21) 1027175.800 (-1.32) 1035229.400 (-0.55) 1039159.400 (-0.17) + parsec3/dedup 2526700.400 2540671.600 (0.55) 2503689.800 (-0.91) 2544440.200 (0.70) 2510519.000 (-0.64) 2503148.200 (-0.93) + parsec3/facesim 545844.600 550680.000 (0.89) 543658.600 (-0.40) 532320.200 (-2.48) 539429.600 (-1.18) 470836.800 (-13.74) + parsec3/ferret 352118.600 326782.600 (-7.20) 322645.600 (-8.37) 304054.800 (-13.65) 317259.000 (-9.90) 313532.400 (-10.96) + parsec3/fluidanimate 651597.600 580045.200 (-10.98) 578297.400 (-11.25) 569431.600 (-12.61) 577322.800 (-11.40) 482061.600 (-26.02) + parsec3/freqmine 989212.000 996291.200 (0.72) 989405.000 (0.02) 970891.000 (-1.85) 981122.000 (-0.82) 736030.000 (-25.59) + parsec3/raytrace 1749470.400 1751183.200 (0.10) 1740937.600 (-0.49) 1717138.800 (-1.85) 1731298.200 (-1.04) 1528069.000 (-12.66) + parsec3/streamcluster 123425.400 151548.200 (22.79) 144024.800 (16.69) 118379.000 (-4.09) 124845.400 (1.15) 118629.800 (-3.89) + parsec3/swaptions 4150.600 25679.200 (518.69) 19914.800 (379.80) 8577.000 (106.64) 17348.200 (317.97) -100.000 (0.00) + parsec3/vips 2989801.200 3003285.400 (0.45) 3012055.400 (0.74) 2958369.000 (-1.05) 2970897.800 (-0.63) 2962063.000 (-0.93) + parsec3/x264 3242663.400 3256091.000 (0.41) 3248949.400 (0.19) 3195605.400 (-1.45) 3206571.600 (-1.11) 3219046.333 (-0.73) + splash2x/barnes 1208017.600 1212702.600 (0.39) 1194143.600 (-1.15) 1208450.200 (0.04) 1212607.600 (0.38) 878554.667 (-27.27) + splash2x/fft 9786259.000 9705563.600 (-0.82) 9391006.800 (-4.04) 9967230.600 (1.85) 9657639.400 (-1.31) 10215759.333 (4.39) + splash2x/lu_cb 512130.400 521431.800 (1.82) 513051.400 (0.18) 508534.200 (-0.70) 512643.600 (0.10) 328017.333 (-35.95) + splash2x/lu_ncb 511156.200 526566.400 (3.01) 513230.400 (0.41) 509823.800 (-0.26) 516302.000 (1.01) 418078.333 (-18.21) + splash2x/ocean_cp 3353269.200 3319496.000 (-1.01) 3251575.000 (-3.03) 3379639.800 (0.79) 3326416.600 (-0.80) 3143859.667 (-6.24) + splash2x/ocean_ncp 3905538.200 3914929.600 (0.24) 3877493.200 (-0.72) 7053949.400 (80.61) 4633035.000 (18.63) 3527482.667 (-9.68) + splash2x/radiosity 1462030.400 1468050.000 (0.41) 1454997.600 (-0.48) 1466985.400 (0.34) 1461777.400 (-0.02) 441332.000 (-69.81) + splash2x/radix 2367200.800 2363995.000 (-0.14) 2251124.600 (-4.90) 2417603.800 (2.13) 2317804.000 (-2.09) 2495581.667 (5.42) + splash2x/raytrace 42356.200 56270.200 (32.85) 49419.000 (16.67) 86408.400 (104.00) 50547.600 (19.34) 40341.000 (-4.76) + splash2x/volrend 148631.600 162954.600 (9.64) 153305.200 (3.14) 140089.200 (-5.75) 149831.200 (0.81) 150232.000 (1.08) + splash2x/water_nsquared 39835.800 54268.000 (36.23) 53659.400 (34.70) 41073.600 (3.11) 85322.600 (114.19) 49463.667 (24.17) + splash2x/water_spatial 669746.600 679634.200 (1.48) 667518.600 (-0.33) 664383.800 (-0.80) 684470.200 (2.20) 401946.000 (-39.99) + total 41472600.000 41520700.000 (0.12) 40796900.000 (-1.63) 44592000.000 (7.52) 41840100.000 (0.89) 38456146.000 (-7.27) + + +DAMON Overheads +--------------- + +In total, DAMON virtual memory access recording feature ('rec') incurs 1.39% +runtime overhead and 0.12% memory space overhead. Even though the size of the +monitoring target region becomes much larger with the physical memory access +recording ('prec'), it still shows only modest amount of overhead (1.89% for +runtime and -1.63% for memory footprint). + +For a convenient test run of 'rec' and 'prec', I use a Python wrapper. The +wrapper constantly consumes about 10-15MB of memory. This becomes a high +memory overhead if the target workload has a small memory footprint. +Nonetheless, the overheads are not from DAMON, but from the wrapper, and thus +should be ignored. This fake memory overhead continues in 'ethp' and 'prcl', +as those configurations are also using the Python wrapper. + + +Efficient THP +------------- + +THP 'always' enabled policy achieves 4.26% speedup but incurs 7.52% memory +overhead. It achieves 34.26% speedup in the best case, but 80.61% memory +overhead in the worst case. Interestingly, both the best and worst-case are +with 'splash2x/ocean_ncp'). + +The 2-lines implementation of data access monitoring based THP version ('ethp') +shows 3.78% speedup and 0.89% memory overhead. In other words, 'ethp' removes +88.16% of THP memory waste while preserving 88.73% of THP speedup in total. In +the case of the 'splash2x/ocean_ncp', 'ethp' removes 76.90% of THP memory waste +while preserving 23.23% of THP speedup. + + +Proactive Reclamation +--------------------- + +As similar to the original work, I use 4G 'zram' swap device for this +configuration. + +In total, our 1 line implementation of Proactive Reclamation, 'prcl', incurred +8.74% runtime overhead in total while achieving 7.27% system memory footprint +reduction. + +Nonetheless, as the memory usage is calculated with 'MemFree' in +'/proc/meminfo', it contains the SwapCached pages. As the swapcached pages can +be easily evicted, I also measured the residential set size of the workloads:: + + rss.avg orig rec (overhead) prec (overhead) thp (overhead) ethp (overhead) prcl (overhead) + parsec3/blackscholes 587078.800 586930.400 (-0.03) 586355.200 (-0.12) 586147.400 (-0.16) 585203.400 (-0.32) 243110.800 (-58.59) + parsec3/bodytrack 32470.800 32488.400 (0.05) 32351.000 (-0.37) 32433.400 (-0.12) 32429.000 (-0.13) 18804.800 (-42.09) + parsec3/canneal 842418.600 842442.800 (0.00) 844396.000 (0.23) 840756.400 (-0.20) 841242.000 (-0.14) 825296.200 (-2.03) + parsec3/dedup 1180100.000 1179309.200 (-0.07) 1160477.800 (-1.66) 1198789.200 (1.58) 1171802.600 (-0.70) 595531.600 (-49.54) + parsec3/facesim 312056.000 312109.200 (0.02) 312044.400 (-0.00) 318102.200 (1.94) 316239.600 (1.34) 192002.600 (-38.47) + parsec3/ferret 99792.200 99641.800 (-0.15) 99044.800 (-0.75) 102041.800 (2.25) 100854.000 (1.06) 83628.200 (-16.20) + parsec3/fluidanimate 530735.400 530759.000 (0.00) 530865.200 (0.02) 532440.800 (0.32) 522778.600 (-1.50) 433547.400 (-18.31) + parsec3/freqmine 552951.000 552788.000 (-0.03) 552761.800 (-0.03) 556004.400 (0.55) 554001.200 (0.19) 47881.200 (-91.34) + parsec3/raytrace 883966.600 880061.400 (-0.44) 883144.800 (-0.09) 871786.400 (-1.38) 881000.200 (-0.34) 267210.800 (-69.77) + parsec3/streamcluster 110901.600 110863.400 (-0.03) 110893.600 (-0.01) 115612.600 (4.25) 114976.800 (3.67) 109728.600 (-1.06) + parsec3/swaptions 5708.800 5712.400 (0.06) 5681.400 (-0.48) 5720.400 (0.20) 5726.000 (0.30) -100.000 (0.00) + parsec3/vips 32272.200 32427.400 (0.48) 31959.800 (-0.97) 34177.800 (5.90) 33306.400 (3.20) 28869.000 (-10.55) + parsec3/x264 81878.000 81914.200 (0.04) 81823.600 (-0.07) 83579.400 (2.08) 83236.800 (1.66) 81220.667 (-0.80) + splash2x/barnes 1211917.400 1211328.200 (-0.05) 1212450.400 (0.04) 1221951.000 (0.83) 1218924.600 (0.58) 489430.333 (-59.62) + splash2x/fft 9874359.000 9934912.400 (0.61) 9843789.600 (-0.31) 10204484.600 (3.34) 9980640.400 (1.08) 7003881.000 (-29.07) + splash2x/lu_cb 509066.200 509222.600 (0.03) 509059.600 (-0.00) 509594.600 (0.10) 509479.000 (0.08) 315538.667 (-38.02) + splash2x/lu_ncb 509192.200 508437.000 (-0.15) 509331.000 (0.03) 509606.000 (0.08) 509578.200 (0.08) 412065.667 (-19.07) + splash2x/ocean_cp 3380283.800 3380301.000 (0.00) 3377617.200 (-0.08) 3416531.200 (1.07) 3389845.200 (0.28) 2398084.000 (-29.06) + splash2x/ocean_ncp 3917913.600 3924529.200 (0.17) 3934911.800 (0.43) 7123907.400 (81.83) 4703623.600 (20.05) 2428288.000 (-38.02) + splash2x/radiosity 1467978.600 1468655.400 (0.05) 1467534.000 (-0.03) 1477722.600 (0.66) 1471036.000 (0.21) 148573.333 (-89.88) + splash2x/radix 2413933.400 2408367.600 (-0.23) 2381122.400 (-1.36) 2480169.400 (2.74) 2367118.800 (-1.94) 1848857.000 (-23.41) + splash2x/raytrace 23280.000 23272.800 (-0.03) 23259.000 (-0.09) 28715.600 (23.35) 28354.400 (21.80) 13302.333 (-42.86) + splash2x/volrend 44079.400 44091.600 (0.03) 44022.200 (-0.13) 44547.200 (1.06) 44615.600 (1.22) 29833.000 (-32.32) + splash2x/water_nsquared 29392.800 29425.600 (0.11) 29422.400 (0.10) 30317.800 (3.15) 30602.200 (4.11) 21769.000 (-25.94) + splash2x/water_spatial 658604.400 660276.800 (0.25) 660334.000 (0.26) 660491.000 (0.29) 660636.400 (0.31) 304246.667 (-53.80) + total 29292400.000 29350400.000 (0.20) 29224634.000 (-0.23) 32985491.000 (12.61) 30157300.000 (2.95) 18340700.000 (-37.39) + +In total, 37.39% of residential sets were reduced. + +With parsec3/freqmine, 'prcl' reduced 91.34% of residential sets and 25.59% of +system memory usage while incurring only 1.58% runtime overhead. diff --git a/Documentation/vm/damon/faq.rst b/Documentation/vm/damon/faq.rst new file mode 100644 index 000000000000..088128bbf22b --- /dev/null +++ b/Documentation/vm/damon/faq.rst @@ -0,0 +1,58 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================== +Frequently Asked Questions +========================== + +Why a new subsystem, instead of extending perf or other user space tools? +========================================================================= + +First, because it needs to be lightweight as much as possible so that it can be +used online, any unnecessary overhead such as kernel - user space context +switching cost should be avoided. Second, DAMON aims to be used by other +programs including the kernel. Therefore, having a dependency on specific +tools like perf is not desirable. These are the two biggest reasons why DAMON +is implemented in the kernel space. + + +Can 'idle pages tracking' or 'perf mem' substitute DAMON? +========================================================= + +Idle page tracking is a low level primitive for access check of the physical +address space. 'perf mem' is similar, though it can use sampling to minimize +the overhead. On the other hand, DAMON is a higher-level framework for the +monitoring of various address spaces. It is focused on memory management +optimization and provides sophisticated accuracy/overhead handling mechanisms. +Therefore, 'idle pages tracking' and 'perf mem' could provide a subset of +DAMON's output, but cannot substitute DAMON. + + +How can I optimize my system's memory management using DAMON? +============================================================= + +Because there are several ways for the DAMON-based optimizations, we wrote a +separate document, :doc:`/admin-guide/mm/damon/guide`. Please refer to that. + + +Does DAMON support virtual memory only? +======================================= + +No. The core of the DAMON is address space independent. The address space +specific low level primitive parts including monitoring target regions +constructions and actual access checks can be implemented and configured on the +DAMON core by the users. In this way, DAMON users can monitor any address +space with any access check technique. + +Nonetheless, DAMON provides vma tracking and PTE Accessed bit check based +implementations of the address space dependent functions for the virtual memory +by default, for a reference and convenient use. In near future, we will +provide those for physical memory address space. + + +Can I simply monitor page granularity? +====================================== + +Yes. You can do so by setting the ``min_nr_regions`` attribute higher than the +working set size divided by the page size. Because the monitoring target +regions size is forced to be ``>=page size``, the region split will make no +effect. diff --git a/Documentation/vm/damon/index.rst b/Documentation/vm/damon/index.rst new file mode 100644 index 000000000000..17dca3c12aad --- /dev/null +++ b/Documentation/vm/damon/index.rst @@ -0,0 +1,31 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================== +DAMON: Data Access MONitor +========================== + +DAMON is a data access monitoring framework subsystem for the Linux kernel. +The core mechanisms of DAMON (refer to :doc:`design` for the detail) make it + + - *accurate* (the monitoring output is useful enough for DRAM level memory + management; It might not appropriate for CPU Cache levels, though), + - *light-weight* (the monitoring overhead is low enough to be applied online), + and + - *scalable* (the upper-bound of the overhead is in constant range regardless + of the size of target workloads). + +Using this framework, therefore, the kernel's memory management mechanisms can +make advanced decisions. Experimental memory management optimization works +that incurring high data accesses monitoring overhead could implemented again. +In user space, meanwhile, users who have some special workloads can write +personalized applications for better understanding and optimizations of their +workloads and systems. + +.. toctree:: + :maxdepth: 2 + + faq + design + eval + api + plans diff --git a/Documentation/vm/index.rst b/Documentation/vm/index.rst index 611140ffef7e..8d8d088bc7af 100644 --- a/Documentation/vm/index.rst +++ b/Documentation/vm/index.rst @@ -31,6 +31,7 @@ descriptions of data structures and algorithms. active_mm balance cleancache + damon/index free_page_reporting frontswap highmem -- 2.17.1