Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Mon, 17 Aug 2020 22:15:32 +0200
From:   Andreas Kemnade <andreas@kemnade.info>
To:     Adam Ford <aford173@gmail.com>
Cc:     Linux-OMAP <linux-omap@vger.kernel.org>,
        Adam Ford-BE <aford@beaconembedded.com>,
        =?UTF-8?B?QmVub8OudA==?= Cousson <bcousson@baylibre.com>,
        Tony Lindgren <tony@atomide.com>,
        Rob Herring <robh+dt@kernel.org>,
        devicetree <devicetree@vger.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        "H. Nikolaus Schaller" <hns@goldelico.com>
Subject: Re: [PATCH V2] ARM: dts: omap3: Add cpu trips and cooling map for
 omap34/36 families
Message-ID: <20200817221532.5d150648@aktux>
In-Reply-To: <CAHCN7x+2trMJPmg1xA_j2EUfxqtZX0da-pyzvpiZE4GanVNf4Q@mail.gmail.com>
References: <20200817133931.11785-1-aford173@gmail.com>
        <20200817215953.59607c11@aktux>
        <CAHCN7x+2trMJPmg1xA_j2EUfxqtZX0da-pyzvpiZE4GanVNf4Q@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Mon, 17 Aug 2020 15:02:27 -0500
Adam Ford <aford173@gmail.com> wrote:

> On Mon, Aug 17, 2020 at 2:59 PM Andreas Kemnade <andreas@kemnade.info> wrote:
> >
> > On Mon, 17 Aug 2020 08:39:31 -0500
> > Adam Ford <aford173@gmail.com> wrote:
> >  
> > > The OMAP3530, OMAP3630, and DM3730 all show thresholds of 90C and 105C
> > > depending on commercial or industrial temperature ratings.
> > >
> > > This patch expands the thermal information to include the limits of 90
> > > and 105C for alert and critical.  It sets the coolings-cells for the
> > > 34xx and 36xx CPU's which both point to omap3-cpu-thermal.dtsi.
> > >
> > > For boards who never use industrial temperatures, these can be
> > > changed on their respective device trees with something like:
> > >
> > > &cpu_alert0 {
> > >       temperature = <85000>; /* millicelsius */
> > > };
> > >
> > > &cpu_crit {
> > >       temperature = <90000>; /* millicelsius */
> > > };
> > >
> > > OMAP3_THERMAL will need to be enabled.  It is off by default.
> > >  
> > hmm, I think the patch for idling core when OMAP3_THERMAL is enabled
> > got stuck somewhere. It still seems not to work. Shouldn't that patch
> > be applied first?  
> 
> I rebased the idle stuff, and now I get errors, so I haven't pushed it
> yet.  I put a note that OMAP3_THERMAL is off by default, but this
> patch would at least get the framing in there.  I know at least two of
> us that use 1GHZ processors which are not supposed to run at that
> speed above 90MHz, so the idea was to tolerate the higher current for
> now, and when the idle stuff works, we'll enable the OMAP3_THERMAL by
> default.
> 
yes, makes sense, so with this patch we have the choice to either
optimize for low speeds and currents (by disabling OMAP3_THERMAL and
1GHz) or high speeds (by enabling OMAP3_THERMAL and 1 Ghz).

Regards,
Andreas