Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Sasha Levin <sashal@kernel.org>
To:     linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc:     Stephan Gerhold <stephan@gerhold.net>,
        Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Sasha Levin <sashal@kernel.org>, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 5.8 11/62] arm64: dts: qcom: msm8916: Pull down PDM GPIOs during sleep
Date:   Fri, 21 Aug 2020 12:13:32 -0400
Message-Id: <20200821161423.347071-11-sashal@kernel.org>
In-Reply-To: <20200821161423.347071-1-sashal@kernel.org>
References: <20200821161423.347071-1-sashal@kernel.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit e2ee9edc282961783d519c760bbaa20fed4dec38 ]

The original qcom kernel changed the PDM GPIOs to be pull-down
during sleep at some point. Reportedly this was done because
there was some "leakage at PDM outputs during sleep":

  https://source.codeaurora.org/quic/la/kernel/msm-3.10/commit/?id=0f87e08c1cd3e6484a6f7fb3e74e37340bdcdee0

I cannot say how effective this is, but everything seems to work
fine with this change so let's apply the same to mainline just
to be sure.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-3-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index 5785bf0a807ce..591f48a575353 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -569,7 +569,7 @@ pinconf {
 				pins = "gpio63", "gpio64", "gpio65", "gpio66",
 				       "gpio67", "gpio68";
 				drive-strength = <2>;
-				bias-disable;
+				bias-pull-down;
 			};
 		};
 	};
-- 
2.25.1