Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1750717AbWEVKcd (ORCPT ); Mon, 22 May 2006 06:32:33 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750728AbWEVKcd (ORCPT ); Mon, 22 May 2006 06:32:33 -0400 Received: from anchor-post-36.mail.demon.net ([194.217.242.86]:4874 "EHLO anchor-post-36.mail.demon.net") by vger.kernel.org with ESMTP id S1750717AbWEVKcc (ORCPT ); Mon, 22 May 2006 06:32:32 -0400 Message-ID: <447192B6.90300@onelan.co.uk> Date: Mon, 22 May 2006 11:30:14 +0100 From: Barry Scott User-Agent: Thunderbird 1.5 (X11/20051201) MIME-Version: 1.0 CC: Linux Kernel Dev Subject: Re: broadcom 5752 in HP dc7600U works on 2.6.13 but does not working on 2.6.16 References: <4469E709.7080501@onelan.co.uk> In-Reply-To: <4469E709.7080501@onelan.co.uk> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit To: unlisted-recipients:; (no To-header on input) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 34189 Lines: 735 Does anyone have any comments? If not this list where do I go for further help please? Barry Barry Scott wrote: > Under FC4's build of 2.6.13 the broadcom 5752 works well. But when the > I use the FC4 build of 2.6.16 it no long works. > > The hardware is an HP dc7600U, P4 2.8GHz CPU, 512MB memory > SATA disk. > > mii-tool correctly reports the state of the eth0. Removing and > inserting the > cable is reported as expected. But DHCP or static IP configuration > does not > work under 2.6.16. > > In dmesg output on 2.6.16 I see this message: > ADDRCONF(NETDEV_UP): eth0: link is not ready > > I have recompiled the 2.6.13 version of tg3.c for 2.6.16 and that does > not fix > the problem. > > Looking at /proc/interrupts I see that a lot of difference between .13 > and .16 kernels. > Is this related to the problem? > > Attached are the output of dmesg and /proc/interrupts on 2.6.13 and > 2.6.16 kernels > as well as lspci output. > > Barry > > ------------------------------------------------------------------------ > > Linux version 2.6.13-1.1526_FC4 (bhcompile@hs20-bc1-6.build.redhat.com) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 Wed Sep 28 19:15:10 EDT 2005 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000001f7cf300 (usable) > BIOS-e820: 000000001f7cf300 - 0000000020000000 (reserved) > BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) > BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) > 0MB HIGHMEM available. > 503MB LOWMEM available. > Using x86 segment limits to approximate NX protection > On node 0 totalpages: 128975 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 124879 pages, LIFO batch:31 > HighMem zone: 0 pages, LIFO batch:1 > DMI 2.4 present. > ACPI: RSDP (v000 COMPAQ ) @ 0x000e8c10 > ACPI: RSDT (v001 COMPAQ CPQ0968 0x20050518 0x00000000) @ 0x1f7df340 > ACPI: FADT (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7df3ec > ACPI: MADT (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7df460 > ACPI: ASF! (v032 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7df4e4 > ACPI: MCFG (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7df547 > ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000e) @ 0x00000000 > ACPI: PM-Timer IO Port: 0xf808 > Allocating PCI resources starting at 20000000 (gap: 20000000:d0000000) > Built 1 zonelists > Kernel command line: ro root=/dev/VolGroup00/LogVol00 acpi=ht quiet > Initializing CPU#0 > CPU 0 irqstacks, hard=c04e7000 soft=c04e6000 > PID hash table entries: 2048 (order: 11, 32768 bytes) > Detected 2793.550 MHz processor. > Using pmtmr for high-res timesource > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Memory: 504688k/515900k available (3084k kernel code, 10612k reserved, 704k data, 176k init, 0k highmem) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > Calibrating delay using timer specific routine.. 5592.94 BogoMIPS (lpj=11185890) > Security Framework v1.0.0 initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > selinux_register_security: Registering secondary module capability > Capability LSM initialized as secondary > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000 > CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000 > monitor/mwait feature present. > using mwait in idle threads. > CPU: Trace cache: 12K uops, L1 D cache: 16K > CPU: L2 cache: 1024K > CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000080 0000641d 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU0: Intel P4/Xeon Extended MCE MSRs (24) available > mtrr: v2.0 (20020519) > CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01 > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Checking 'hlt' instruction... OK. > checking if image is initramfs... it is > Freeing initrd memory: 1791k freed > NET: Registered protocol family 16 > PCI: PCI BIOS revision 2.20 entry at 0xec51b, last bus=63 > PCI: Using MMCONFIG > ACPI: Subsystem revision 20050408 > ACPI: Interpreter disabled. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI: disabled > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: Probing PCI hardware > PCI: Probing PCI hardware (bus 00) > Boot video device is 0000:00:02.0 > PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 > PCI: Transparent bridge - 0000:00:1e.0 > PCI: Discovered primary peer bus 01 [IRQ] > PCI: Using IRQ router PIIX/ICH [8086/27b8] at 0000:00:1f.0 > PCI: IRQ 0 for device 0000:00:1c.1 doesn't match PIRQ mask - try pci=usepirqmask > PCI: Found IRQ 10 for device 0000:00:1c.1 > PCI: Sharing IRQ 10 with 0000:00:1f.1 > PCI: Sharing IRQ 10 with 0000:3f:00.0 > PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 > PCI: Bridge: 0000:00:1c.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.1 > IO window: disabled. > MEM window: e0500000-e07fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1e.0 > IO window: disabled. > MEM window: e1000000-e31fffff > PREFETCH window: disabled. > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > PCI: Found IRQ 10 for device 0000:00:1c.1 > PCI: Sharing IRQ 10 with 0000:00:1f.1 > PCI: Sharing IRQ 10 with 0000:3f:00.0 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > apm: BIOS not found. > audit: initializing netlink socket (disabled) > audit(1147790248.720:1): initialized > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > SELinux: Registering netfilter hooks > Initializing Cryptographic API > ksign: Installing public key data > Loading keyring > - Added public key 54AD4C348BA3456 > - User ID: Red Hat, Inc. (Kernel Module GPG key) > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > pcie_portdrv_probe->Dev[27d0:8086] has invalid IRQ. Check vendor BIOS > assign_interrupt_mode Found MSI capability > Allocate Port Service[pcie00] > Allocate Port Service[pcie02] > Allocate Port Service[pcie03] > PCI: Found IRQ 10 for device 0000:00:1c.1 > PCI: Sharing IRQ 10 with 0000:00:1f.1 > PCI: Sharing IRQ 10 with 0000:3f:00.0 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[pcie00] > Allocate Port Service[pcie02] > Allocate Port Service[pcie03] > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Real Time Clock Driver v1.12 > Linux agpgart interface v0.101 (c) Dave Jones > agpgart: Detected an Intel 945G Chipset. > agpgart: Detected 7932K stolen memory. > agpgart: AGP aperture is 256M @ 0xd0000000 > PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered > RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > ICH7: IDE controller at PCI slot 0000:00:1f.1 > PCI: Found IRQ 10 for device 0000:00:1f.1 > PCI: Sharing IRQ 10 with 0000:00:1c.1 > PCI: Sharing IRQ 10 with 0000:3f:00.0 > ICH7: chipset revision 1 > ICH7: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:pio, hdd:pio > Probing IDE interface ide0... > hda: HL-DT-ST GCR-8240N, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > Probing IDE interface ide1... > hda: ATAPI 24X CD-ROM drive, 128kB Cache, DMA > Uniform CD-ROM driver Revision: 3.20 > ide-floppy driver 0.99.newide > usbcore: registered new driver hiddev > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.01:USB HID core driver > mice: PS/2 mouse device common for all mice > md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 > md: bitmap version 3.38 > NET: Registered protocol family 2 > input: AT Translated Set 2 keyboard on isa0060/serio0 > IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > TCP established hash table entries: 16384 (order: 5, 131072 bytes) > TCP bind hash table entries: 16384 (order: 6, 458752 bytes) > TCP: Hash tables configured (established 16384 bind 16384) > TCP reno registered > TCP bic registered > Initializing IPsec netlink socket > NET: Registered protocol family 1 > NET: Registered protocol family 17 > Using IPI Shortcut mode > Freeing unused kernel memory: 176k freed > SCSI subsystem initialized > libata version 1.12 loaded. > ata_piix version 1.04 > PCI: Found IRQ 5 for device 0000:00:1f.2 > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > ata1: SATA max UDMA/133 cmd 0x10D8 ctl 0x10F2 bmdma 0x10B0 irq 5 > ata2: SATA max UDMA/133 cmd 0x10E0 ctl 0x10F6 bmdma 0x10B8 irq 5 > ata1: dev 0 cfg 49:2f00 82:3069 83:7c01 84:4023 85:3069 86:3401 87:4023 88:203f > ata1: dev 0 ATA, max UDMA/100, 156301488 sectors: lba48 > ata1: dev 0 configured for UDMA/100 > scsi0 : ata_piix > input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 > ATA: abnormal status 0x7F on port 0x10E7 > ata2: disabling port > scsi1 : ata_piix > Vendor: ATA Model: ST380819AS Rev: 3.02 > Type: Direct-Access ANSI SCSI revision: 05 > SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) > SCSI device sda: drive cache: write back > SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) > SCSI device sda: drive cache: write back > sda: sda1 sda2 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 > device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > SELinux: Disabled at runtime. > SELinux: Unregistering netfilter hooks > FDC 0 is a post-1991 82077 > tg3.c:v3.37 (August 25, 2005) > PCI: Found IRQ 10 for device 0000:3f:00.0 > PCI: Sharing IRQ 10 with 0000:00:1c.1 > PCI: Sharing IRQ 10 with 0000:00:1f.1 > PCI: Setting latency timer of device 0000:3f:00.0 to 64 > eth0: Tigon3 [partno(BCM95752) rev 6001 PHY(5752)] (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:14:c2:56:72:c9 > eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] > eth0: dma_rwctrl[76180000] > PCI: Found IRQ 11 for device 0000:00:1b.0 > PCI: Sharing IRQ 11 with 0000:00:1d.2 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > hw_random hardware driver 1.0.0 loaded > shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 > shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 > Linux video capture interface: v1.00 > cx88_dvb: Unknown symbol vp3054_i2c_remove > cx88_dvb: Unknown symbol nxt200x_attach > cx88_dvb: Unknown symbol zl10353_attach > cx88_dvb: Unknown symbol cx24123_attach > cx88_dvb: Unknown symbol vp3054_i2c_probe > cx8800: Unknown symbol v4l_compat_ioctl32 > PCI: Found IRQ 5 for device 0000:00:1d.7 > PCI: Sharing IRQ 5 with 0000:00:1d.0 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: debug port 1 > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: irq 5, io mem 0xe04c4000 > PCI: cache line size of 128 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > USB Universal Host Controller Interface driver v2.3 > PCI: Found IRQ 5 for device 0000:00:1d.0 > PCI: Sharing IRQ 5 with 0000:00:1d.7 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.0: irq 5, io base 0x00001000 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > PCI: Found IRQ 11 for device 0000:00:1d.1 > PCI: Sharing IRQ 11 with 0000:05:09.0 > PCI: Sharing IRQ 11 with 0000:05:09.2 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001020 > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > PCI: Found IRQ 11 for device 0000:00:1d.2 > PCI: Sharing IRQ 11 with 0000:00:1b.0 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001040 > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > PCI: Found IRQ 11 for device 0000:00:1d.3 > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001060 > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > EXT3 FS on dm-0, internal journal > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on dm-1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Adding 2097144k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 > tg3: eth0: Link is up at 100 Mbps, full duplex. > tg3: eth0: Flow control is off for TX and off for RX. > cx88_dvb: Unknown symbol vp3054_i2c_remove > cx88_dvb: Unknown symbol nxt200x_attach > cx88_dvb: Unknown symbol zl10353_attach > cx88_dvb: Unknown symbol cx24123_attach > cx88_dvb: Unknown symbol vp3054_i2c_probe > hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } > hda: drive_cmd: error=0x04 { AbortedCommand } > ide: failed opcode was: 0xec > NET: Registered protocol family 10 > Disabled Privacy Extensions on device c0475600(lo) > IPv6 over IPv4 tunneling driver > eth0: no IPv6 routers present > > ------------------------------------------------------------------------ > > Linux version 2.6.16-1.2096_FC4 (bhcompile@hs20-bc1-4.build.redhat.com) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 Wed Apr 19 15:27:46 EDT 2006 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000001f7cf300 (usable) > BIOS-e820: 000000001f7cf300 - 0000000020000000 (reserved) > BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) > BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) > 0MB HIGHMEM available. > 503MB LOWMEM available. > found SMP MP-table at 000fe700 > Using x86 segment limits to approximate NX protection > On node 0 totalpages: 128975 > DMA zone: 4096 pages, LIFO batch:0 > DMA32 zone: 0 pages, LIFO batch:0 > Normal zone: 124879 pages, LIFO batch:31 > HighMem zone: 0 pages, LIFO batch:0 > DMI 2.4 present. > ACPI: RSDP (v000 COMPAQ ) @ 0x000e8c10 > ACPI: RSDT (v001 COMPAQ CPQ0968 0x20050518 0x00000000) @ 0x1f7df340 > ACPI: FADT (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7df3ec > ACPI: MADT (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7df460 > ACPI: ASF! (v032 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7df4e4 > ACPI: MCFG (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7df547 > ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000e) @ 0x00000000 > ACPI: PM-Timer IO Port: 0xf808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 15:4 APIC version 20 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > Processor #1 15:4 APIC version 20 > WARNING: NR_CPUS limit of 1 reached. Processor ignored. > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) > Using ACPI for processor (LAPIC) configuration information > Intel MultiProcessor Specification v1.4 > Virtual Wire compatibility mode. > OEM ID: COMPAQ Product ID: APIC at: 0xFEE00000 > I/O APIC #1 Version 17 at 0xFEC00000. > Enabling APIC mode: Flat. Using 1 I/O APICs > Processors: 1 > Allocating PCI resources starting at 30000000 (gap: 20000000:d0000000) > Built 1 zonelists > Kernel command line: ro root=/dev/VolGroup00/LogVol00 acpi=ht quiet > mapped APIC to ffffd000 (fee00000) > mapped IOAPIC to ffffc000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > CPU 0 irqstacks, hard=c040a000 soft=c040b000 > PID hash table entries: 2048 (order: 11, 32768 bytes) > Detected 2793.649 MHz processor. > Using pmtmr for high-res timesource > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Memory: 505692k/515900k available (2131k kernel code, 9720k reserved, 754k data, 200k init, 0k highmem) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > Calibrating delay using timer specific routine.. 5597.77 BogoMIPS (lpj=11195556) > Security Framework v1.0.0 initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > selinux_register_security: Registering secondary module capability > Capability LSM initialized as secondary > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000 > CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000 > monitor/mwait feature present. > using mwait in idle threads. > CPU: Trace cache: 12K uops, L1 D cache: 16K > CPU: L2 cache: 1024K > CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000180 0000641d 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU0: Intel P4/Xeon Extended MCE MSRs (24) available > CPU0: Thermal monitoring enabled > CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01 > Checking 'hlt' instruction... OK. > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=-1 pin1=-1 apic2=-1 pin2=-1 > ...trying to set up timer (IRQ0) through the 8259A ... failed. > ...trying to set up timer as Virtual Wire IRQ... works. > checking if image is initramfs... it is > Freeing initrd memory: 1756k freed > HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. > NET: Registered protocol family 16 > PCI: PCI BIOS revision 2.20 entry at 0xec51b, last bus=63 > PCI: Using MMCONFIG > ACPI: Subsystem revision 20060127 > ACPI: Interpreter disabled. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI: disabled > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: Probing PCI hardware > PCI: Probing PCI hardware (bus 00) > Boot video device is 0000:00:02.0 > PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 > PCI: Transparent bridge - 0000:00:1e.0 > PCI: Discovered primary peer bus 01 [IRQ] > PCI: Using IRQ router PIIX/ICH [8086/27b8] at 0000:00:1f.0 > PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16 > PCI->APIC IRQ transform: 0000:00:1b.0[A] -> IRQ 21 > PCI->APIC IRQ transform: 0000:00:1c.1[B] -> IRQ 17 > PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 20 > PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 18 > PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 21 > PCI->APIC IRQ transform: 0000:00:1d.3[D] -> IRQ 22 > PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 20 > PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 17 > PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 19 > PCI: using PPB 0000:00:1c.1[A] to get irq 16 > PCI->APIC IRQ transform: 0000:3f:00.0[A] -> IRQ 16 > PCI->APIC IRQ transform: 0000:05:09.0[A] -> IRQ 18 > PCI->APIC IRQ transform: 0000:05:09.2[A] -> IRQ 18 > PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 > PCI: Bridge: 0000:00:1c.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.1 > IO window: disabled. > MEM window: e0500000-e07fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1e.0 > IO window: disabled. > MEM window: e1000000-e31fffff > PREFETCH window: disabled. > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > apm: BIOS not found. > audit: initializing netlink socket (disabled) > audit(1147789692.852:1): initialized > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > SELinux: Registering netfilter hooks > Initializing Cryptographic API > ksign: Installing public key data > Loading keyring > - Added public key FD06BDCFDB15BAC1 > - User ID: Red Hat, Inc. (Kernel Module GPG key) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > pcie_portdrv_probe->Dev[27d0:8086] has invalid IRQ. Check vendor BIOS > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.0:pcie00] > Allocate Port Service[0000:00:1c.0:pcie02] > Allocate Port Service[0000:00:1c.0:pcie03] > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.1:pcie00] > Allocate Port Service[0000:00:1c.1:pcie02] > Allocate Port Service[0000:00:1c.1:pcie03] > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Real Time Clock Driver v1.12ac > Linux agpgart interface v0.101 (c) Dave Jones > agpgart: Detected an Intel 945G Chipset. > agpgart: Detected 7932K stolen memory. > agpgart: AGP aperture is 256M @ 0xd0000000 > PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled > RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > ICH7: IDE controller at PCI slot 0000:00:1f.1 > ICH7: chipset revision 1 > ICH7: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:pio, hdd:pio > Probing IDE interface ide0... > hda: HL-DT-ST GCR-8240N, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > Probing IDE interface ide1... > hda: ATAPI 24X CD-ROM drive, 128kB Cache, DMA > Uniform CD-ROM driver Revision: 3.20 > ide-floppy driver 0.99.newide > usbcore: registered new driver libusual > usbcore: registered new driver hiddev > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > mice: PS/2 mouse device common for all mice > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 > md: bitmap version 4.39 > NET: Registered protocol family 2 > input: AT Translated Set 2 keyboard as /class/input/input0 > IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > TCP established hash table entries: 16384 (order: 6, 262144 bytes) > TCP bind hash table entries: 16384 (order: 6, 327680 bytes) > TCP: Hash tables configured (established 16384 bind 16384) > TCP reno registered > TCP bic registered > Initializing IPsec netlink socket > NET: Registered protocol family 1 > NET: Registered protocol family 17 > Using IPI Shortcut mode > Freeing unused kernel memory: 200k freed > Write protecting the kernel read-only data: 346k > SCSI subsystem initialized > libata version 1.20 loaded. > ata_piix 0000:00:1f.2: version 1.05 > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > ata1: SATA max UDMA/133 cmd 0x10D8 ctl 0x10F2 bmdma 0x10B0 irq 19 > ata2: SATA max UDMA/133 cmd 0x10E0 ctl 0x10F6 bmdma 0x10B8 irq 19 > ata1: dev 0 cfg 49:2f00 82:3069 83:7c01 84:4023 85:3069 86:3401 87:4023 88:203f > ata1: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48 > ata1: dev 0 configured for UDMA/100 > scsi0 : ata_piix > ATA: abnormal status 0x7F on port 0x10E7 > ata2: disabling port > scsi1 : ata_piix > Vendor: ATA Model: ST380819AS Rev: 3.02 > Type: Direct-Access ANSI SCSI revision: 05 > SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > sda: sda1 sda2 > sd 0:0:0:0: Attached scsi disk sda > device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com > input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > SELinux: Disabled at runtime. > SELinux: Unregistering netfilter hooks > FDC 0 is a post-1991 82077 > tg3.c:v3.49 (Feb 2, 2006) > PCI: Setting latency timer of device 0000:3f:00.0 to 64 > eth0: Tigon3 [partno(BCM95752) rev 6001 PHY(5752)] (PCI Express) 10/100/1000BaseT Ethernet 00:14:c2:56:72:c9 > eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] > eth0: dma_rwctrl[76180000] dma_mask[64-bit] > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > hw_random hardware driver 1.0.0 loaded > Linux video capture interface: v1.00 > cx2388x dvb driver version 0.0.5 loaded > CORE cx88[0]: subsystem: 17de:08a6, board: KWorld/VStream XPert DVB-T [card=14,autodetected] > TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe > input: cx88 IR (KWorld/VStream XPert D as /class/input/input2 > cx88[0]/2: found at 0000:05:09.2, rev: 5, irq: 18, latency: 32, mmio: 0xe2000000 > cx88[0]/2: cx2388x based dvb card > DVB: registering new adapter (cx88[0]). > DVB: registering frontend 0 (Zarlink MT352 DVB-T)... > cx2388x v4l2 driver version 0.0.5 loaded > cx88[0]/0: found at 0000:05:09.0, rev: 5, irq: 18, latency: 32, mmio: 0xe1000000 > cx88[0]/0: registered device video0 [v4l2] > cx88[0]/0: registered device vbi0 > set_control id=0x980900 reg=0x310110 val=0x00 (mask 0xff) > set_control id=0x980901 reg=0x310110 val=0x3f00 (mask 0xff00) > set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff) > set_control id=0x980902 reg=0x310114 val=0x5a7f (mask 0xffff) > set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed] > set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed] > set_control id=0x980906 reg=0x320598 val=0x40 (mask 0x7f) [shadowed] > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: debug port 1 > PCI: cache line size of 128 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe04c4000 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > USB Universal Host Controller Interface driver v2.3 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001000 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001020 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001040 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.3: irq 22, io base 0x00001060 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > EXT3 FS on dm-0, internal journal > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on dm-1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Adding 2097144k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2097144k > hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } > hda: drive_cmd: error=0x04 { AbortedCommand } > ide: failed opcode was: 0xec > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > ADDRCONF(NETDEV_UP): eth0: link is not ready > IPv6 over IPv4 tunneling driver > > ------------------------------------------------------------------------ > > CPU0 > 0: 18405 XT-PIC timer > 1: 123 XT-PIC i8042 > 2: 0 XT-PIC cascade > 5: 2899 XT-PIC libata, ehci_hcd:usb1, uhci_hcd:usb2 > 8: 1 XT-PIC rtc > 10: 130 XT-PIC eth0 > 11: 60 XT-PIC HDA Intel, uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5 > 12: 102 XT-PIC i8042 > 14: 361 XT-PIC ide0 > NMI: 0 > ERR: 0 > > ------------------------------------------------------------------------ > > CPU0 > 0: 50458 local-APIC-edge timer > 1: 124 IO-APIC-edge i8042 > 2: 0 XT-PIC cascade > 8: 1 IO-APIC-edge rtc > 12: 106 IO-APIC-edge i8042 > 14: 362 IO-APIC-edge ide0 > 16: 0 IO-APIC-level eth0 > 18: 0 IO-APIC-level cx88[0], cx88[0], uhci_hcd:usb3 > 19: 2961 IO-APIC-level libata > 20: 0 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2 > 21: 99 IO-APIC-level HDA Intel, uhci_hcd:usb4 > 22: 0 IO-APIC-level uhci_hcd:usb5 > NMI: 0 > LOC: 50420 > ERR: 0 > MIS: 0 > > ------------------------------------------------------------------------ > > 00:00.0 Host bridge: Intel Corporation Memory Controller Hub (rev 02) > 00:02.0 VGA compatible controller: Intel Corporation Integrated Graphics Controller (rev 02) > 00:1b.0 Class 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) > 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) > 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) > 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) > 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01) > 05:09.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) > 05:09.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) > 3f:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express (rev 01) > > ------------------------------------------------------------------------ > > eth0: negotiated 100baseTx-FD, link ok > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/