Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Michal Simek <michal.simek@xilinx.com>
To:     u-boot@lists.denx.de, git@xilinx.com
Cc:     Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>,
        Rajan Vaja <rajan.vaja@xilinx.com>,
        Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
Date:   Mon, 24 Aug 2020 12:28:39 +0200
Message-Id: <1a69c3fa0291f991ffcf113ea222c713ba4d4ff0.1598264917.git.michal.simek@xilinx.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Fix the leds subnode names to match (^led-[0-9a-f]$|led).

Similar change has been also done by commit 08dc0e5dd9aa ("arm64: dts:
meson: fix leds subnodes name").

The patch is fixing this warning:
avnet-ultra96-rev1.dt.yaml: leds: 'ds2', 'ds3', 'ds4', 'ds5' do not match
any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

vbus-det led is not fixed because it is not LED. It should be likely
handled as gpio hog.
---
 arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index d60110ad8367..2352dc553ba7 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -56,27 +56,27 @@ sw4 {
 
 	leds {
 		compatible = "gpio-leds";
-		ds2 {
+		led-ds2 {
 			label = "ds2";
 			gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		ds3 {
+		led-ds3 {
 			label = "ds3";
 			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tx"; /* WLAN tx */
 			default-state = "off";
 		};
 
-		ds4 {
+		led-ds4 {
 			label = "ds4";
 			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0rx"; /* WLAN rx */
 			default-state = "off";
 		};
 
-		ds5 {
+		led-ds5 {
 			label = "ds5";
 			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "bluetooth-power";
-- 
2.28.0