Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH] ARM: dts: stm32: add resets property to spi device nodes
 on stm32h743
To:     Tobias Schramm <t.schramm@manjaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Maxime Coquelin <mcoquelin.stm32@gmail.com>
CC:     <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
References: <20200814223543.3420540-1-t.schramm@manjaro.org>
From:   Alexandre Torgue <alexandre.torgue@st.com>
Message-ID: <171d5344-884f-8974-30a5-42b076d73336@st.com>
Date:   Fri, 28 Aug 2020 11:54:37 +0200
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.10.0
MIME-Version: 1.0
In-Reply-To: <20200814223543.3420540-1-t.schramm@manjaro.org>
Content-Type: text/plain; charset="utf-8"; format=flowed
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Tobias

On 8/15/20 12:35 AM, Tobias Schramm wrote:
> The stm32 spi driver tries to determine the fifo size of spi devices
> dynamically. However, if the spi was already configured by the bootloader
> the fifo size check can become an endless loop, because the driver
> expects the spi to be in its initial "after device reset" state. The
> driver does already support resetting the spi device at probe, thus this
> patch adds only the required device tree properties
> 
> Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>

Applied on stm32-next.

Thanks.
Alex