Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Krzysztof Kozlowski <krzk@kernel.org>
To:     Lee Jones <lee.jones@linaro.org>, Rob Herring <robh+dt@kernel.org>,
        Miquel Raynal <miquel.raynal@bootlin.com>,
        Richard Weinberger <richard@nod.at>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        NXP Linux Team <linux-imx@nxp.com>,
        Anson Huang <Anson.Huang@nxp.com>,
        Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
        Han Xu <han.xu@nxp.com>, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org
Cc:     Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH v2 01/19] dt-bindings: mfd: rohm,bd71847-pmic: Correct clock properties requirements
Date:   Fri, 28 Aug 2020 18:47:32 +0200
Message-Id: <20200828164750.10377-2-krzk@kernel.org>
In-Reply-To: <20200828164750.10377-1-krzk@kernel.org>
References: <20200828164750.10377-1-krzk@kernel.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The input clock and number of clock provider cells are not required for
the PMIC to operate.  They are needed only for the optional bd718x7
clock driver.

Add also clock-output-names as driver takes use of it.

This fixes dtbs_check warnings like:

    arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dt.yaml: pmic@4b: 'clocks' is a required property
    arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dt.yaml: pmic@4b: '#clock-cells' is a required property

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---
 .../devicetree/bindings/mfd/rohm,bd71847-pmic.yaml       | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
index 77bcca2d414f..5d531051a153 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
@@ -38,6 +38,9 @@ properties:
   "#clock-cells":
     const: 0
 
+  clock-output-names:
+    maxItems: 1
+
 # The BD71847 abd BD71850 support two different HW states as reset target
 # states. States are called as SNVS and READY. At READY state all the PMIC
 # power outputs go down and OTP is reload. At the SNVS state all other logic
@@ -116,12 +119,14 @@ required:
   - compatible
   - reg
   - interrupts
-  - clocks
-  - "#clock-cells"
   - regulators
 
 additionalProperties: false
 
+dependencies:
+  '#clock-cells': [clocks]
+  clocks: ['#clock-cells']
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-- 
2.17.1