Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Krzysztof Kozlowski <krzk@kernel.org>
To:     Lee Jones <lee.jones@linaro.org>, Rob Herring <robh+dt@kernel.org>,
        Miquel Raynal <miquel.raynal@bootlin.com>,
        Richard Weinberger <richard@nod.at>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        NXP Linux Team <linux-imx@nxp.com>,
        Anson Huang <Anson.Huang@nxp.com>,
        Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
        Han Xu <han.xu@nxp.com>, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org
Cc:     Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH v2 02/19] dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs
Date:   Fri, 28 Aug 2020 18:47:33 +0200
Message-Id: <20200828164750.10377-3-krzk@kernel.org>
In-Reply-To: <20200828164750.10377-1-krzk@kernel.org>
References: <20200828164750.10377-1-krzk@kernel.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Driver requires different amount of clocks for different SoCs.  Describe
these requirements properly to fix dtbs_check warnings like:

    arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml: nand-controller@33002000: clock-names:1: 'gpmi_apb' was expected

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v1:
1. Do not require order of clocks (use pattern).
---
 .../devicetree/bindings/mtd/gpmi-nand.yaml    | 76 +++++++++++++++----
 1 file changed, 61 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
index 28ff8c581837..e08e0a50929e 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
@@ -9,9 +9,6 @@ title: Freescale General-Purpose Media Interface (GPMI) binding
 maintainers:
   - Han Xu <han.xu@nxp.com>
 
-allOf:
-  - $ref: "nand-controller.yaml"
-
 description: |
   The GPMI nand controller provides an interface to control the NAND
   flash chips. The device tree may optionally contain sub-nodes
@@ -58,22 +55,10 @@ properties:
   clocks:
     minItems: 1
     maxItems: 5
-    items:
-      - description: SoC gpmi io clock
-      - description: SoC gpmi apb clock
-      - description: SoC gpmi bch clock
-      - description: SoC gpmi bch apb clock
-      - description: SoC per1 bch clock
 
   clock-names:
     minItems: 1
     maxItems: 5
-    items:
-      - const: gpmi_io
-      - const: gpmi_apb
-      - const: gpmi_bch
-      - const: gpmi_bch_apb
-      - const: per1_bch
 
   fsl,use-minimum-ecc:
     type: boolean
@@ -107,6 +92,67 @@ required:
 
 unevaluatedProperties: false
 
+allOf:
+  - $ref: "nand-controller.yaml"
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx23-gpmi-nand
+              - fsl,imx28-gpmi-nand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: SoC gpmi io clock
+        clock-names:
+          items:
+            - const: gpmi_io
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6q-gpmi-nand
+              - fsl,imx6sx-gpmi-nand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: SoC gpmi io clock
+            - description: SoC gpmi apb clock
+            - description: SoC gpmi bch clock
+            - description: SoC gpmi bch apb clock
+            - description: SoC per1 bch clock
+        clock-names:
+          items:
+            - pattern: "^(gpmi_(io|apb|bch|bch_apb)|per1_bch)$"
+            - pattern: "^(gpmi_(io|apb|bch|bch_apb)|per1_bch)$"
+            - pattern: "^(gpmi_(io|apb|bch|bch_apb)|per1_bch)$"
+            - pattern: "^(gpmi_(io|apb|bch|bch_apb)|per1_bch)$"
+            - pattern: "^(gpmi_(io|apb|bch|bch_apb)|per1_bch)$"
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx7d-gpmi-nand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: SoC gpmi io clock
+            - description: SoC gpmi bch apb clock
+        clock-names:
+          minItems: 2
+          maxItems: 2
+          items:
+            - pattern: "^gpmi_(io|bch_apb)$"
+            - pattern: "^gpmi_(io|bch_apb)$"
+
 examples:
   - |
     nand-controller@8000c000 {
-- 
2.17.1