Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Krzysztof Kozlowski <krzk@kernel.org>
To:     Jonathan Cameron <jic23@kernel.org>,
        Lars-Peter Clausen <lars@metafoo.de>,
        Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
        Peter Rosin <peda@axentia.se>,
        Michael Hennerich <Michael.Hennerich@analog.com>,
        Marek Vasut <marek.vasut@gmail.com>,
        Tomasz Duszynski <tomasz.duszynski@octakon.com>,
        linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-samsung-soc@vger.kernel.org,
        linux-amlogic@lists.infradead.org,
        linux-stm32@st-md-mailman.stormreply.com
Cc:     Andy Shevchenko <andy.shevchenko@gmail.com>,
        Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH v3 01/18] iio: accel: bma180: Simplify with dev_err_probe()
Date:   Sat, 29 Aug 2020 08:47:09 +0200
Message-Id: <20200829064726.26268-1-krzk@kernel.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 drivers/iio/accel/bma180.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index 5b7a467c7b27..448faed001fd 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -1000,19 +1000,15 @@ static int bma180_probe(struct i2c_client *client,
 		return ret;
 
 	data->vdd_supply = devm_regulator_get(dev, "vdd");
-	if (IS_ERR(data->vdd_supply)) {
-		if (PTR_ERR(data->vdd_supply) != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get vdd regulator %d\n",
-				(int)PTR_ERR(data->vdd_supply));
-		return PTR_ERR(data->vdd_supply);
-	}
+	if (IS_ERR(data->vdd_supply))
+		return dev_err_probe(dev, PTR_ERR(data->vdd_supply),
+				     "Failed to get vdd regulator\n");
+
 	data->vddio_supply = devm_regulator_get(dev, "vddio");
-	if (IS_ERR(data->vddio_supply)) {
-		if (PTR_ERR(data->vddio_supply) != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get vddio regulator %d\n",
-				(int)PTR_ERR(data->vddio_supply));
-		return PTR_ERR(data->vddio_supply);
-	}
+	if (IS_ERR(data->vddio_supply))
+		return dev_err_probe(dev, PTR_ERR(data->vddio_supply),
+				     "Failed to get vddio regulator\n");
+
 	/* Typical voltage 2.4V these are min and max */
 	ret = regulator_set_voltage(data->vdd_supply, 1620000, 3600000);
 	if (ret)
-- 
2.17.1