Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030182AbWEYNjw (ORCPT ); Thu, 25 May 2006 09:39:52 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1030184AbWEYNjw (ORCPT ); Thu, 25 May 2006 09:39:52 -0400 Received: from tirith.ics.muni.cz ([147.251.4.36]:27606 "EHLO tirith.ics.muni.cz") by vger.kernel.org with ESMTP id S1030182AbWEYNjv (ORCPT ); Thu, 25 May 2006 09:39:51 -0400 Date: Thu, 25 May 2006 15:39:37 +0200 From: Jan Kasprzak To: Jeff Garzik Cc: linux-kernel@vger.kernel.org Subject: Re: 3ware 7500 not working in 2.6.16.18, 2.6.17-rc5 Message-ID: <20060525133937.GB20917@fi.muni.cz> References: <20060525122240.GG19612@fi.muni.cz> <4475B05E.5080101@garzik.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <4475B05E.5080101@garzik.org> User-Agent: Mutt/1.4.1i X-Muni-Spam-TestIP: 147.251.48.3 X-Muni-Envelope-From: kas@fi.muni.cz X-Muni-Virus-Test: Clean Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 30085 Lines: 864 Jeff Garzik wrote: : Can you narrow down which kernel version first introduces the breakage, : between 2.6.15-rc2 and 2.6.16.x? : It would be difficult, because the server is in production use. I may do some tests over the weekend. : And we will need much more information on your platform, what patches : (if any) you have applied, your .config, dmesg, etc. Tyan S2882 dual opteron 244, 12GB RAM, Fedora Core 3 system (altough I have tried to compile the kernel with FC5 compilers as well). Here are the lspci outout, the relevant parts of .config, and dmesg of the kernel booted without "iommu=off" option. Hope this helps (or ask for more details). -Yenya $ /sbin/lspci 00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) 00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05) 00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) 00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02) 00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05) 00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) 00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:03.0 RAID bus controller: 3ware Inc 3ware Inc 3ware 7xxx/8xxx-series PATA/SATA-RAID (rev 01) 02:09.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03) 02:09.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03) 03:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 03:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 03:05.0 Unknown mass storage controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) 03:06.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 03:08.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 10) $ egrep -v '^#|^$' /usr/src/linux-2.6.16.18/.config CONFIG_X86_64=y CONFIG_64BIT=y CONFIG_X86=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_INITRAMFS_SOURCE="" CONFIG_UID16=y CONFIG_VM86=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_X86_PC=y CONFIG_MK8=y CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_MSR=m CONFIG_X86_CPUID=m CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_MTRR=y CONFIG_SMP=y CONFIG_PREEMPT_NONE=y CONFIG_NUMA=y CONFIG_K8_NUMA=y CONFIG_X86_64_ACPI_NUMA=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_NR_CPUS=2 CONFIG_HPET_TIMER=y CONFIG_GART_IOMMU=y CONFIG_SWIOTLB=y CONFIG_X86_MCE=y CONFIG_X86_MCE_AMD=y CONFIG_PHYSICAL_START=0x100000 CONFIG_HZ_250=y CONFIG_HZ=250 CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ISA_DMA_API=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_PM=y CONFIG_PM_LEGACY=y CONFIG_ACPI=y CONFIG_ACPI_AC=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_VIDEO=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_IA32_EMULATION=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_FIB_HASH=y CONFIG_SYN_COOKIES=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_BIC=y CONFIG_IPV6=y CONFIG_NET_PKTGEN=m CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_BLK_DEV_FD=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_BLK_DEV_3W_XXXX_RAID=y CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID5=y CONFIG_BLK_DEV_DM=y CONFIG_NETDEVICES=y CONFIG_TIGON3=y CONFIG_INPUT=y CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_WATCHDOG=y CONFIG_W83627HF_WDT=y CONFIG_HW_RANDOM=y CONFIG_NVRAM=m CONFIG_RTC=m CONFIG_GEN_RTC=m CONFIG_GEN_RTC_X=y CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_HPET=y CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_AMD756=y CONFIG_I2C_AMD8111=y CONFIG_I2C_ISA=y CONFIG_SENSORS_EEPROM=y CONFIG_HWMON=y CONFIG_HWMON_VID=y CONFIG_SENSORS_ADM1025=m CONFIG_SENSORS_ADM1031=m CONFIG_SENSORS_LM85=y CONFIG_SENSORS_W83627HF=y CONFIG_VIDEO_SELECT=y CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_JBD=y CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y CONFIG_XFS_EXPORT=y CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y CONFIG_INOTIFY=y CONFIG_QUOTA=y CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_DNOTIFY=y CONFIG_AUTOFS4_FS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFSD=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf-8" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_UTF8=y CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y CONFIG_CRYPTO=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_DES=y CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y $ cat /var/log/dmesg Bootdata ok (command line is ro root=/dev/md0 max_loop=64 console=ttyS0,115200n8) Linux version 2.6.16.18 (kas@calypso.fi.muni.cz) (gcc version 4.1.0 20060304 (Red Hat 4.1.0-3)) #5 SMP Thu May 25 13:55:11 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000faff0000 (usable) BIOS-e820: 00000000faff0000 - 00000000fafff000 (ACPI data) BIOS-e820: 00000000fafff000 - 00000000fb000000 (ACPI NVS) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000300000000 (usable) ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f4620 ACPI: RSDT (v001 A M I OEMRSDT 0x10000304 MSFT 0x00000097) @ 0x00000000faff0000 ACPI: FADT (v002 A M I OEMFACP 0x10000304 MSFT 0x00000097) @ 0x00000000faff0200 ACPI: MADT (v001 A M I OEMAPIC 0x10000304 MSFT 0x00000097) @ 0x00000000faff0380 ACPI: OEMB (v001 A M I OEMBIOS 0x10000304 MSFT 0x00000097) @ 0x00000000fafff040 ACPI: ASF! (v016 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x00000000faff3490 ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 2 Node 0 MemBase 0000000000000000 Limit 0000000200000000 Node 1 MemBase 0000000200000000 Limit 0000000300000000 NUMA: Using 33 for the hash shift. Using node hash shift of 33 Bootmem setup node 0 0000000000000000-0000000200000000 Bootmem setup node 1 0000000200000000-0000000300000000 On node 0 totalpages: 2046560 DMA zone: 2616 pages, LIFO batch:0 DMA32 zone: 1009704 pages, LIFO batch:31 Normal zone: 1034240 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 On node 1 totalpages: 1034240 DMA zone: 0 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 1034240 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 ACPI: PM-Timer IO Port: 0x5008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:5 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:5 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfebff000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 17, address 0xfebff000, GSI 24-27 ACPI: IOAPIC (id[0x04] address[0xfebfe000] gsi_base[28]) IOAPIC[2]: apic_id 4, version 17, address 0xfebfe000, GSI 28-31 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at fb800000 (gap: fb000000:47c0000) Checking aperture... CPU 0: aperture @ f6fc000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ c000000 Built 2 zonelists Kernel command line: ro root=/dev/md0 max_loop=64 console=ttyS0,115200n8 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) Disabling vsyscall due to use of PM timer time.c: Using 3.579545 MHz WALL PM GTOD PM timer. time.c: Detected 1792.443 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Memory: 12232556k/12582912k available (2682k kernel code, 267984k reserved, 994k data, 192k init) Calibrating delay using timer specific routine.. 3593.73 BogoMIPS (lpj=7187478) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0(1) -> Node 0 -> Core 0 Using local APIC timer interrupts. result 12447529 Detected 12.447 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3585.11 BogoMIPS (lpj=7170222) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1(1) -> Node 1 -> Core 0 AMD Opteron(tm) Processor 244 stepping 01 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff -110 cycles, maxerr 1013 cycles) Brought up 2 CPUs testing NMI watchdog ... OK. migration_cost=870 DMI 2.3 present. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:03:06.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ c000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture PCI: Bridge: 0000:00:06.0 IO window: 9000-afff MEM window: fc900000-feafffff PREFETCH window: ff500000-ff5fffff PCI: Bridge: 0000:00:0a.0 IO window: disabled. MEM window: fc800000-fc8fffff PREFETCH window: ff400000-ff4fffff PCI: Bridge: 0000:00:0b.0 IO window: 8000-8fff MEM window: fb700000-fc7fffff PREFETCH window: ff300000-ff3fffff IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with ACLs, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: MSI quirk detected. pci_msi_quirk set. PCI: MSI quirk detected. pci_msi_quirk set. ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Processor [CPU1] (supports 8 throttling states) hw_random: AMD768 system management I/O registers at 0x5000. hw_random hardware driver 1.0.0 loaded WDT driver for the Winbond(TM) W83627HF Super I/O chip initialising. w83627hf WDT: initialized. timeout=60 sec (nowayout=0) Linux agpgart interface v0.101 (c) Dave Jones Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using monotonic_clock(). serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A loop: loaded (max 64 devices) tg3.c:v3.49 (Feb 2, 2006) GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 24 (level, low) -> IRQ 16 eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:27:de:17 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[769f4000] dma_mask[64-bit] GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:02:09.1[B] -> GSI 25 (level, low) -> IRQ 17 eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:27:de:18 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[769f4000] dma_mask[64-bit] 3ware Storage Controller device driver for Linux v1.26.02.001. GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 28 (level, low) -> IRQ 18 scsi0 : 3ware Storage Controller 3w-xxxx: scsi0: Found a 3ware Storage Controller at 0x8c00, IRQ: 18. Vendor: 3ware Model: Logical Disk 0 Rev: 1.2 Type: Direct-Access ANSI SCSI revision: 00 Vendor: 3ware Model: Logical Disk 1 Rev: 1.2 Type: Direct-Access ANSI SCSI revision: 00 Vendor: 3ware Model: Logical Disk 2 Rev: 1.2 Type: Direct-Access ANSI SCSI revision: 00 Vendor: 3ware Model: Logical Disk 3 Rev: 1.2 Type: Direct-Access ANSI SCSI revision: 00 Vendor: 3ware Model: Logical Disk 4 Rev: 1.2 Type: Direct-Access ANSI SCSI revision: 00 Vendor: 3ware Model: Logical Disk 5 Rev: 1.2 Type: Direct-Access ANSI SCSI revision: 00 Vendor: 3ware Model: Logical Disk 6 Rev: 1.2 Type: Direct-Access ANSI SCSI revision: 00 Vendor: 3ware Model: Logical Disk 7 Rev: 1.2 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 00 00 00 SCSI device sda: drive cache: write back w/ FUA SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 00 00 00 SCSI device sda: drive cache: write back w/ FUA sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 00 00 00 SCSI device sdb: drive cache: write back w/ FUA SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 00 00 00 SCSI device sdb: drive cache: write back w/ FUA sdb: sdb1 sdb2 sdb3 sd 0:0:1:0: Attached scsi disk sdb SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) sdc: Write Protect is off sdc: Mode Sense: 00 00 00 00 SCSI device sdc: drive cache: write back w/ FUA SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) sdc: Write Protect is off sdc: Mode Sense: 00 00 00 00 SCSI device sdc: drive cache: write back w/ FUA sdc: sdc1 sdc2 sdc3 sd 0:0:2:0: Attached scsi disk sdc SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) sdd: Write Protect is off sdd: Mode Sense: 00 00 00 00 SCSI device sdd: drive cache: write back w/ FUA SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) sdd: Write Protect is off sdd: Mode Sense: 00 00 00 00 SCSI device sdd: drive cache: write back w/ FUA sdd: sdd1 sdd2 sdd3 sd 0:0:3:0: Attached scsi disk sdd SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB) sde: Write Protect is off sde: Mode Sense: 00 00 00 00 SCSI device sde: drive cache: write back w/ FUA SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB) sde: Write Protect is off sde: Mode Sense: 00 00 00 00 SCSI device sde: drive cache: write back w/ FUA sde: sde1 sde2 sde3 sde4 sd 0:0:4:0: Attached scsi disk sde SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB) sdf: Write Protect is off sdf: Mode Sense: 00 00 00 00 SCSI device sdf: drive cache: write back w/ FUA SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB) sdf: Write Protect is off sdf: Mode Sense: 00 00 00 00 SCSI device sdf: drive cache: write back w/ FUA sdf: sdf1 sdf2 sdf3 sdf4 sd 0:0:5:0: Attached scsi disk sdf SCSI device sdg: 488397168 512-byte hdwr sectors (250059 MB) sdg: Write Protect is off sdg: Mode Sense: 00 00 00 00 SCSI device sdg: drive cache: write back w/ FUA SCSI device sdg: 488397168 512-byte hdwr sectors (250059 MB) sdg: Write Protect is off sdg: Mode Sense: 00 00 00 00 SCSI device sdg: drive cache: write back w/ FUA sdg: sdg1 sdg2 sdg3 sd 0:0:6:0: Attached scsi disk sdg SCSI device sdh: 488397168 512-byte hdwr sectors (250059 MB) sdh: Write Protect is off sdh: Mode Sense: 00 00 00 00 SCSI device sdh: drive cache: write back w/ FUA SCSI device sdh: 488397168 512-byte hdwr sectors (250059 MB) sdh: Write Protect is off sdh: Mode Sense: 00 00 00 00 SCSI device sdh: drive cache: write back w/ FUA sdh: sdh1 sdh2 sdh3 sdh4 sd 0:0:7:0: Attached scsi disk sdh mice: PS/2 mouse device common for all mice i2c /dev entries driver md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: generic_sse generic_sse: 5515.000 MB/sec raid5: using function: generic_sse (5515.000 MB/sec) md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com oprofile: using NMI interrupt. NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 md: Autodetecting RAID arrays. md: autorun ... md: considering sdh3 ... md: adding sdh3 ... md: sdh2 has different UUID to sdh3 md: sdh1 has different UUID to sdh3 md: adding sdg3 ... md: sdg2 has different UUID to sdh3 md: sdg1 has different UUID to sdh3 md: adding sdf3 ... md: sdf2 has different UUID to sdh3 md: sdf1 has different UUID to sdh3 md: adding sde3 ... md: sde2 has different UUID to sdh3 md: sde1 has different UUID to sdh3 md: adding sdd3 ... md: sdd2 has different UUID to sdh3 md: sdd1 has different UUID to sdh3 md: adding sdc3 ... md: sdc2 has different UUID to sdh3 md: sdc1 has different UUID to sdh3 md: adding sdb3 ... md: sdb2 has different UUID to sdh3 md: sdb1 has different UUID to sdh3 md: adding sda3 ... md: sda2 has different UUID to sdh3 md: sda1 has different UUID to sdh3 md: created md5 md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: running: raid5: device sdh3 operational as raid disk 7 raid5: device sdg3 operational as raid disk 6 raid5: device sdf3 operational as raid disk 5 raid5: device sde3 operational as raid disk 4 raid5: device sdd3 operational as raid disk 3 raid5: device sdc3 operational as raid disk 2 raid5: device sdb3 operational as raid disk 1 raid5: device sda3 operational as raid disk 0 raid5: allocated 8462kB for md5 raid5: raid level 5 set md5 active with 8 out of 8 devices, algorithm 2 RAID5 conf printout: --- rd:8 wd:8 fd:0 disk 0, o:1, dev:sda3 disk 1, o:1, dev:sdb3 disk 2, o:1, dev:sdc3 disk 3, o:1, dev:sdd3 disk 4, o:1, dev:sde3 disk 5, o:1, dev:sdf3 disk 6, o:1, dev:sdg3 disk 7, o:1, dev:sdh3 md: considering sdh2 ... md: adding sdh2 ... md: sdh1 has different UUID to sdh2 md: adding sdg2 ... md: sdg1 has different UUID to sdh2 md: adding sdf2 ... md: sdf1 has different UUID to sdh2 md: adding sde2 ... md: sde1 has different UUID to sdh2 md: adding sdd2 ... md: sdd1 has different UUID to sdh2 md: adding sdc2 ... md: sdc1 has different UUID to sdh2 md: adding sdb2 ... md: sdb1 has different UUID to sdh2 md: adding sda2 ... md: sda1 has different UUID to sdh2 md: created md4 md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: running: md4: setting max_sectors to 512, segment boundary to 131071 raid0: looking at sdh2 raid0: comparing sdh2(4891648) with sdh2(4891648) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sdg2 raid0: comparing sdg2(4891648) with sdh2(4891648) raid0: EQUAL raid0: looking at sdf2 raid0: comparing sdf2(4891648) with sdh2(4891648) raid0: EQUAL raid0: looking at sde2 raid0: comparing sde2(4891648) with sdh2(4891648) raid0: EQUAL raid0: looking at sdd2 raid0: comparing sdd2(4891648) with sdh2(4891648) raid0: EQUAL raid0: looking at sdc2 raid0: comparing sdc2(4891648) with sdh2(4891648) raid0: EQUAL raid0: looking at sdb2 raid0: comparing sdb2(4891648) with sdh2(4891648) raid0: EQUAL raid0: looking at sda2 raid0: comparing sda2(4891648) with sdh2(4891648) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 39133184 blocks. raid0 : conf->hash_spacing is 39133184 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. md: considering sdh1 ... md: adding sdh1 ... md: adding sdg1 ... md: sdf1 has different UUID to sdh1 md: sde1 has different UUID to sdh1 md: sdd1 has different UUID to sdh1 md: sdc1 has different UUID to sdh1 md: sdb1 has different UUID to sdh1 md: sda1 has different UUID to sdh1 md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors md: considering sdf1 ... md: adding sdf1 ... md: adding sde1 ... md: sdd1 has different UUID to sdf1 md: sdc1 has different UUID to sdf1 md: sdb1 has different UUID to sdf1 md: sda1 has different UUID to sdf1 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md: considering sdd1 ... md: adding sdd1 ... md: adding sdc1 ... md: sdb1 has different UUID to sdd1 md: sda1 has different UUID to sdd1 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 192k freed Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on md0, internal journal md: md6 stopped. md: bind md: bind md6: setting max_sectors to 128, segment boundary to 32767 raid0: looking at md3 raid0: comparing md3(9775360) with md3(9775360) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at md2 raid0: comparing md2(9775360) with md3(9775360) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 19550720 blocks. raid0 : conf->hash_spacing is 19550720 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. kjournald starting. Commit interval 5 seconds EXT3 FS on md1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md6, internal journal EXT3-fs: mounted filesystem with ordered data mode. XFS mounting filesystem md4 Ending clean XFS mount for filesystem: md4 XFS mounting filesystem md5 Ending clean XFS mount for filesystem: md5 ISO 9660 Extensions: Microsoft Joliet Level 1 Unable to load NLS charset utf-8 Unable to load NLS charset utf-8 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 1 Unable to load NLS charset utf-8 Unable to load NLS charset utf-8 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 1 Unable to load NLS charset utf-8 Unable to load NLS charset utf-8 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 1 Unable to load NLS charset utf-8 Unable to load NLS charset utf-8 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 Unable to load NLS charset utf-8 Unable to load NLS charset utf-8 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 Unable to load NLS charset utf-8 Unable to load NLS charset utf-8 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 Unable to load NLS charset utf-8 Unable to load NLS charset utf-8 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 Unable to load NLS charset utf-8 Unable to load NLS charset utf-8 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 Unable to load NLS charset utf-8 Unable to load NLS charset utf-8 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 Unable to load NLS charset utf-8 Unable to load NLS charset utf-8 ISO 9660 Extensions: RRIP_1991A Adding 4883752k swap on /dev/sde4. Priority:10 extents:1 across:4883752k Adding 4883752k swap on /dev/sdf4. Priority:10 extents:1 across:4883752k Adding 4883752k swap on /dev/sdh4. Priority:10 extents:1 across:4883752k -- | Jan "Yenya" Kasprzak | | GPG: ID 1024/D3498839 Fingerprint 0D99A7FB206605D7 8B35FCDE05B18A5E | | http://www.fi.muni.cz/~kas/ Journal: http://www.fi.muni.cz/~kas/blog/ | > I will never go to meetings again because I think face to face meetings < > are the biggest waste of time you can ever have. --Linus Torvalds < - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/