Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Sun, 30 Aug 2020 20:47:56 -0400
From:   Samuel Dionne-Riel <samuel@dionne-riel.com>
To:     linux-kernel@vger.kernel.org
Cc:     dri-devel@lists.freedesktop.org, Lin Huang <hl@rock-chips.com>,
        linux-rockchip@lists.infradead.org,
        Heiko Stuebner <heiko@sntech.de>
Subject: innolux p097pfg dpms off/on fails (on gru-scarlet)
Message-ID: <20200830204756.1f9dba11@DUFFMAN>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi,

I have an Asus Chromebook Tablet CT100PA, which I will refer to as
"dumo" from this point on, which is a specific variant of gru-scarlet.
As far as I am aware, all gru-scarlet are the same, except for the
display, and in turn the different scarlets with the innolux panel
are the same.

I do not have the hardware to verify the kingdisplay variant's
behaviour, though I don't really expect it to fail the same way, but it
is still a possibility that there is a root cause that could cause a
similar failure.

The display will apparently suspend (right wording?) fine with DPMS,
but will not resume (wording?) fine. This has been an issue since the
introduction of the driver and the introduction of the device (scarlet)
to the kernel, and is still on 5.9-rc2.

Doing the following:

  $ xset dpms force off # standby, or suspend
  $ xset dpms force on

Pretty much instantly the following messages are logged:

[   53.731851] dw-mipi-dsi-rockchip ff960000.mipi: failed to write command FIFO
[   53.739815] panel-innolux-p079zca ff960000.mipi.0: failed to write command 0

Then 120 seconds later, this pair of WARN:

[  173.754168] ------------[ cut here ]------------
[  173.759343] pclk_mipi_dsi1 already disabled
[  173.764076] WARNING: CPU: 2 PID: 5182 at drivers/clk/clk.c:952 clk_core_disable+0x2c/0x94
[  173.773216] Modules linked in:
[  173.776639] CPU: 2 PID: 5182 Comm: X Not tainted 5.9.0-rc2 #1-mobile-nixos
[  173.784323] Hardware name: Google Scarlet (DT)
[  173.789292] pstate: 40000085 (nZcv daIf -PAN -UAO BTYPE=--)
[  173.795522] pc : clk_core_disable+0x2c/0x94
[  173.800199] lr : clk_core_disable+0x2c/0x94
[  173.804871] sp : ffff800011d3ba20
[  173.808573] x29: ffff800011d3ba20 x28: 0000000000000028
[  173.814514] x27: ffff0000c32bdf00 x26: 0000000000000038
[  173.820455] x25: ffff800010d2e2eb x24: ffff0000edece000
[  173.826395] x23: ffff0000f0bea680 x22: 0000000000000001
[  173.832326] x21: ffff0000ef82e0e0 x20: ffff0000f0986500
[  173.838266] x19: ffff0000f0986500 x18: 0000000000000000
[  173.844198] x17: 0000000000000000 x16: 0000000000000000
[  173.850137] x15: 000000000000000a x14: 00000000000b962f
[  173.856077] x13: ffff800091d3b76f x12: 0000000000000006
[  173.862008] x11: ffffffffffffffff x10: 0000000000000030
[  173.867939] x9 : ffff800011d3b77d x8 : 0000000000000000
[  173.873869] x7 : 0000000000000008 x6 : ffff80001118811e
[  173.879809] x5 : ffff0000f5589e48 x4 : 0000000000000000
[  173.885741] x3 : 0000000000000027 x2 : 0000000000000027
[  173.891680] x1 : ffff0000e5c3ee40 x0 : 000000000000001f
[  173.897612] Call trace:
[  173.900349]  clk_core_disable+0x2c/0x94
[  173.904637]  clk_core_disable_lock+0x20/0x34
[  173.909413]  clk_disable+0x1c/0x28
[  173.913220]  dw_mipi_dsi_bridge_post_disable+0x80/0x120
[  173.919065]  drm_atomic_bridge_chain_post_disable+0x74/0x98
[  173.925297]  drm_atomic_helper_commit_modeset_disables+0x3d8/0x3dc
[  173.932208]  drm_atomic_helper_commit_tail_rpm+0x20/0xa0
[  173.938138]  commit_tail+0x74/0xf8
[  173.941941]  drm_atomic_helper_commit+0x104/0x108
[  173.947203]  drm_atomic_commit+0x48/0x54
[  173.951590]  drm_atomic_connector_commit_dpms+0xa0/0x100
[  173.957531]  drm_mode_obj_set_property_ioctl+0xd4/0x2c8
[  173.963378]  drm_connector_property_set_ioctl+0x20/0x28
[  173.969220]  drm_ioctl_kernel+0xa0/0xdc
[  173.973507]  drm_ioctl+0x2c4/0x2ec
[  173.977312]  vfs_ioctl+0x24/0x40
[  173.980921]  __arm64_sys_ioctl+0x74/0xa4
[  173.985299]  el0_svc_common.constprop.0+0xe0/0x160
[  173.990655]  do_el0_svc+0x44/0x70
[  173.994362]  el0_sync_handler+0xc8/0x184
[  173.998747]  el0_sync+0x140/0x180
[  174.002450] ---[ end trace 6c6d0de3ca79ec7d ]---
[  174.007763] ------------[ cut here ]------------
[  174.012925] pclk_mipi_dsi0 already disabled
[  174.017633] WARNING: CPU: 5 PID: 5182 at drivers/clk/clk.c:952 clk_core_disable+0x2c/0x94
[  174.026770] Modules linked in:
[  174.030184] CPU: 5 PID: 5182 Comm: X Tainted: G        W         5.9.0-rc2 #1-mobile-nixos
[  174.039419] Hardware name: Google Scarlet (DT)
[  174.044382] pstate: 40000085 (nZcv daIf -PAN -UAO BTYPE=--)
[  174.050608] pc : clk_core_disable+0x2c/0x94
[  174.055278] lr : clk_core_disable+0x2c/0x94
[  174.059948] sp : ffff800011d3ba20
[  174.063646] x29: ffff800011d3ba20 x28: 0000000000000028
[  174.069582] x27: ffff0000c32bdf00 x26: 0000000000000038
[  174.075517] x25: ffff800010d2e2eb x24: ffff0000edece000
[  174.081451] x23: ffff0000f0bea680 x22: 0000000000000001
[  174.087385] x21: ffff0000ef82e0e0 x20: ffff0000f0986400
[  174.093319] x19: ffff0000f0986400 x18: 0000000000000000
[  174.099254] x17: 0000000000000000 x16: 0000000000000000
[  174.105187] x15: 000000000000000a x14: 000000000000327d
[  174.111121] x13: ffff800091d3b76f x12: 0000000000000006
[  174.117055] x11: ffffffffffffffff x10: 0000000000000030
[  174.122989] x9 : ffff800011d3b77d x8 : 0000000000000000
[  174.128923] x7 : 0000000000000008 x6 : ffff80001118811e
[  174.134856] x5 : ffff0000f55cbe48 x4 : 0000000000000000
[  174.140789] x3 : 0000000000000027 x2 : 0000000000000027
[  174.146723] x1 : ffff0000e5c3ee40 x0 : 000000000000001f
[  174.152657] Call trace:
[  174.155388]  clk_core_disable+0x2c/0x94
[  174.159670]  clk_core_disable_lock+0x20/0x34
[  174.164439]  clk_disable+0x1c/0x28
[  174.168239]  dw_mipi_dsi_bridge_post_disable+0xc4/0x120
[  174.174077]  drm_atomic_bridge_chain_post_disable+0x74/0x98
[  174.180303]  drm_atomic_helper_commit_modeset_disables+0x3d8/0x3dc
[  174.187208]  drm_atomic_helper_commit_tail_rpm+0x20/0xa0
[  174.193140]  commit_tail+0x74/0xf8
[  174.196938]  drm_atomic_helper_commit+0x104/0x108
[  174.202191]  drm_atomic_commit+0x48/0x54
[  174.206571]  drm_atomic_connector_commit_dpms+0xa0/0x100
[  174.212505]  drm_mode_obj_set_property_ioctl+0xd4/0x2c8
[  174.218343]  drm_connector_property_set_ioctl+0x20/0x28
[  174.224179]  drm_ioctl_kernel+0xa0/0xdc
[  174.228461]  drm_ioctl+0x2c4/0x2ec
[  174.232258]  vfs_ioctl+0x24/0x40
[  174.235860]  __arm64_sys_ioctl+0x74/0xa4
[  174.240240]  el0_svc_common.constprop.0+0xe0/0x160
[  174.245592]  do_el0_svc+0x44/0x70
[  174.249294]  el0_sync_handler+0xc8/0x184
[  174.253672]  el0_sync+0x140/0x180
[  174.257372] ---[ end trace 6c6d0de3ca79ec7e ]---


Any further interaction with trying to "resume" or "suspend" the
display ends up with similar messages that I'd characterize as
the clock states being "confused".

 * Enabling unprepared pclk_mipi_dsi[01]
 * pclk_mipi_dsi[01] already disabled

Note that before being stuck in a confused state, using the /sys/ nodes
as follow seem to not cause issues:

  $ echo 1 | sudo tee /sys/class/graphics/fb0/blank
  $ echo 0 | sudo tee /sys/class/graphics/fb0/blank

Though once set in a confused state, it fails to recover with anything
I throw at it.

Not sure that it matters, but during all the operations the backlight
operates as expected, it seems only the MIPI subsystem is not working
as expected.

For context, here's some bits of knowledge from an IRC conversation on
the #chromium-os channel on Freenode.

> <mmind00> samueldr amstan: the issue is probably with how
> the dsi bridge handles powerons ... which in turn is a hack around
> how DRM handles display bringup
>
> <mmind00> samueldr amstan: bigger explanation from an
> internal commit I carry around: http://paste.debian.net/1161814/
>
> <mmind00> at least that is the dsi issue I ran into with
> our product using the dw-dsi ... even if dw-dsi is still pre-bridge,
> the issue might be similar - see non-atomic access not always calling
> mode_set

If there's any more information that can be helpful for figuring out
the issue, I'm open to trying them.

Additionally, I'm okay with being given tips or resources about how to
fix the problem. This is out of my realm of expertise, and I'm
definitely confused by the new terminology and lack of background
knowledge.

Thanks,

-- 
Samuel Dionne-Riel