Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <1598851448-5493-1-git-send-email-amit.pundir@linaro.org>
In-Reply-To: <1598851448-5493-1-git-send-email-amit.pundir@linaro.org>
From:   Amit Pundir <amit.pundir@linaro.org>
Date:   Mon, 31 Aug 2020 11:07:35 +0530
Message-ID: <CAMi1Hd3n2rfr+k09L8WO1S1Tn1s3xJencmr1q3a6e-FOgXr5Qg@mail.gmail.com>
Subject: Re: [PATCH v6] arm64: dts: qcom: Add support for Xiaomi Poco F1 (Beryllium)
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Konrad Dybcio <konradybcio@gmail.com>,
        Rob Herring <robh+dt@kernel.org>,
        John Stultz <john.stultz@linaro.org>,
        Sumit Semwal <sumit.semwal@linaro.org>
Cc:     linux-arm-msm <linux-arm-msm@vger.kernel.org>,
        dt <devicetree@vger.kernel.org>,
        lkml <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Konrad,

I couldn't find answer to your question around missing
(regulatorname)-supply properties. Need help in figuring out that
part.

Regards,
Amit Pundir

On Mon, 31 Aug 2020 at 10:54, Amit Pundir <amit.pundir@linaro.org> wrote:
>
> Add initial dts support for Xiaomi Poco F1 (Beryllium).
>
> This initial support is based on upstream Dragonboard 845c
> (sdm845) device. With this dts, Beryllium boots AOSP up to
> ADB shell over USB-C.
>
> Supported functionality includes UFS, USB-C (peripheral),
> microSD card and Vol+/Vol-/power keys. Bluetooth should work
> too but couldn't be verified from adb command line, it is
> verified when enabled from UI with few WIP display patches.
>
> Just like initial db845c support, initializing the SMMU is
> clearing the mapping used for the splash screen framebuffer,
> which causes the device to hang during boot and recovery
> needs a hard power reset. This can be worked around using:
>
>     fastboot oem select-display-panel none
>
> To switch ON the display back run:
>
>     fastboot oem select-display-panel
>
> But this only works on Beryllium devices running bootloader
> version BOOT.XF.2.0-00369-SDM845LZB-1 that shipped with
> Android-9 based release. Newer bootloader version do not
> support switching OFF the display panel at all.
>
> Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> ---
> My WIP tree with a few out-of-tree patches to support
> display, touchscreen, wifi, audio etc is here:
> https://github.com/pundiramit/linux/commits/beryllium-mainline
>
> v6: Renamed dts file to include vendor (xiaomi) name. Moved
>     reserved memory changes in the main node. Renamed model to
>     phone's pretty name. Removed the mmc drive strength comment
>     to avoid further confusion. Sorted the entries in alphabetical
>     order, but additional pinctrl entries are still defined at the
>     end to align with the upstream db845c dts.
> v5: Bumped &tz_mem size from 0x2d00000 to 0x4900000 (to include
>     downstream &removed_region), all the way up to &qseecom_mem.
> v4: Added more downstream reserved memory regions. It probably
>     need more work, but for now I see adsp/cdsp/wlan remoteprocs
>     powering up properly. Removed the regulator nodes not
>     required for the device, as suggested by Bjorn. Also added
>     couple of clocks to protected clocks, which is needed for
>     display to work.
> v3: Added a reserved-memory region from downstream kernel to fix
>     a boot regression with recent dma-pool changes in v5.8-rc6.
> v2: Updated machine compatible string for seemingly inevitable
>     future quirks.
>
>  arch/arm64/boot/dts/qcom/Makefile                  |   1 +
>  .../boot/dts/qcom/sdm845-xiaomi-beryllium.dts      | 383 +++++++++++++++++++++
>  2 files changed, 384 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index d8f1466e6758..9adc269252d3 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -30,6 +30,7 @@ dtb-$(CONFIG_ARCH_QCOM)       += sdm845-cheza-r2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sdm845-cheza-r3.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sdm845-db845c.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sdm845-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM)        += sdm845-xiaomi-beryllium.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sdm850-lenovo-yoga-c630.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sm8150-mtp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sm8250-mtp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
> new file mode 100644
> index 000000000000..cd25d5d8c0c9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
> @@ -0,0 +1,383 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "sdm845.dtsi"
> +#include "pm8998.dtsi"
> +#include "pmi8998.dtsi"
> +
> +/*
> + * Delete following upstream (sdm845.dtsi) reserved
> + * memory mappings which are different in this device.
> + */
> +/delete-node/ &tz_mem;
> +/delete-node/ &adsp_mem;
> +/delete-node/ &wlan_msa_mem;
> +/delete-node/ &mpss_region;
> +/delete-node/ &venus_mem;
> +/delete-node/ &cdsp_mem;
> +/delete-node/ &mba_region;
> +/delete-node/ &slpi_mem;
> +/delete-node/ &spss_mem;
> +/delete-node/ &rmtfs_mem;
> +
> +/ {
> +       model = "Xiaomi Pocophone F1";
> +       compatible = "xiaomi,beryllium", "qcom,sdm845";
> +
> +       /* required for bootloader to select correct board */
> +       qcom,board-id = <69 0>;
> +       qcom,msm-id = <321 0x20001>;
> +
> +       aliases {
> +               hsuart0 = &uart6;
> +       };
> +
> +       gpio-keys {
> +               compatible = "gpio-keys";
> +               autorepeat;
> +
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&vol_up_pin_a>;
> +
> +               vol-up {
> +                       label = "Volume Up";
> +                       linux,code = <KEY_VOLUMEUP>;
> +                       gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
> +               };
> +       };
> +
> +       /* Reserved memory changes from downstream */
> +       reserved-memory {
> +               tz_mem: memory@86200000 {
> +                       reg = <0 0x86200000 0 0x4900000>;
> +                       no-map;
> +               };
> +
> +               adsp_mem: memory@8c500000 {
> +                       reg = <0 0x8c500000 0 0x1e00000>;
> +                       no-map;
> +               };
> +
> +               wlan_msa_mem: memory@8e300000 {
> +                       reg = <0 0x8e300000 0 0x100000>;
> +                       no-map;
> +               };
> +
> +               mpss_region: memory@8e400000 {
> +                       reg = <0 0x8e400000 0 0x7800000>;
> +                       no-map;
> +               };
> +
> +               venus_mem: memory@95c00000 {
> +                       reg = <0 0x95c00000 0 0x500000>;
> +                       no-map;
> +               };
> +
> +               cdsp_mem: memory@96100000 {
> +                       reg = <0 0x96100000 0 0x800000>;
> +                       no-map;
> +               };
> +
> +               mba_region: memory@96900000 {
> +                       reg = <0 0x96900000 0 0x200000>;
> +                       no-map;
> +               };
> +
> +               slpi_mem: memory@96b00000 {
> +                       reg = <0 0x96b00000 0 0x1400000>;
> +                       no-map;
> +               };
> +
> +               spss_mem: memory@97f00000 {
> +                       reg = <0 0x97f00000 0 0x100000>;
> +                       no-map;
> +               };
> +
> +               rmtfs_mem: memory@f6301000 {
> +                       compatible = "qcom,rmtfs-mem";
> +                       reg = <0 0xf6301000 0 0x200000>;
> +                       no-map;
> +
> +                       qcom,client-id = <1>;
> +                       qcom,vmid = <15>;
> +               };
> +       };
> +
> +       vreg_s4a_1p8: vreg-s4a-1p8 {
> +               compatible = "regulator-fixed";
> +               regulator-name = "vreg_s4a_1p8";
> +
> +               regulator-min-microvolt = <1800000>;
> +               regulator-max-microvolt = <1800000>;
> +               regulator-always-on;
> +       };
> +};
> +
> +&adsp_pas {
> +       status = "okay";
> +       firmware-name = "qcom/sdm845/adsp.mdt";
> +};
> +
> +&apps_rsc {
> +       pm8998-rpmh-regulators {
> +               compatible = "qcom,pm8998-rpmh-regulators";
> +               qcom,pmic-id = "a";
> +
> +               vreg_l1a_0p875: ldo1 {
> +                       regulator-min-microvolt = <880000>;
> +                       regulator-max-microvolt = <880000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l5a_0p8: ldo5 {
> +                       regulator-min-microvolt = <800000>;
> +                       regulator-max-microvolt = <800000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l7a_1p8: ldo7 {
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <1800000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l12a_1p8: ldo12 {
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <1800000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l13a_2p95: ldo13 {
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <2960000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l17a_1p3: ldo17 {
> +                       regulator-min-microvolt = <1304000>;
> +                       regulator-max-microvolt = <1304000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l20a_2p95: ldo20 {
> +                       regulator-min-microvolt = <2960000>;
> +                       regulator-max-microvolt = <2968000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l21a_2p95: ldo21 {
> +                       regulator-min-microvolt = <2960000>;
> +                       regulator-max-microvolt = <2968000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l24a_3p075: ldo24 {
> +                       regulator-min-microvolt = <3088000>;
> +                       regulator-max-microvolt = <3088000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l25a_3p3: ldo25 {
> +                       regulator-min-microvolt = <3300000>;
> +                       regulator-max-microvolt = <3312000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +
> +               vreg_l26a_1p2: ldo26 {
> +                       regulator-min-microvolt = <1200000>;
> +                       regulator-max-microvolt = <1200000>;
> +                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +               };
> +       };
> +};
> +
> +&cdsp_pas {
> +       status = "okay";
> +       firmware-name = "qcom/sdm845/cdsp.mdt";
> +};
> +
> +&gcc {
> +       protected-clocks = <GCC_QSPI_CORE_CLK>,
> +                          <GCC_QSPI_CORE_CLK_SRC>,
> +                          <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
> +                          <GCC_LPASS_Q6_AXI_CLK>,
> +                          <GCC_LPASS_SWAY_CLK>;
> +};
> +
> +&gpu {
> +       zap-shader {
> +               memory-region = <&gpu_mem>;
> +               firmware-name = "qcom/sdm845/a630_zap.mbn";
> +       };
> +};
> +
> +&mss_pil {
> +       status = "okay";
> +       firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mdt";
> +};
> +
> +&pm8998_gpio {
> +       vol_up_pin_a: vol-up-active {
> +               pins = "gpio6";
> +               function = "normal";
> +               input-enable;
> +               bias-pull-up;
> +               qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
> +       };
> +};
> +
> +&pm8998_pon {
> +       resin {
> +               compatible = "qcom,pm8941-resin";
> +               interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> +               debounce = <15625>;
> +               bias-pull-up;
> +               linux,code = <KEY_VOLUMEDOWN>;
> +       };
> +};
> +
> +&qupv3_id_0 {
> +       status = "okay";
> +};
> +
> +&sdhc_2 {
> +       status = "okay";
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
> +
> +       vmmc-supply = <&vreg_l21a_2p95>;
> +       vqmmc-supply = <&vreg_l13a_2p95>;
> +
> +       bus-width = <4>;
> +       cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&tlmm {
> +       gpio-reserved-ranges = <0 4>, <81 4>;
> +
> +       sdc2_default_state: sdc2-default {
> +               clk {
> +                       pins = "sdc2_clk";
> +                       bias-disable;
> +                       drive-strength = <16>;
> +               };
> +
> +               cmd {
> +                       pins = "sdc2_cmd";
> +                       bias-pull-up;
> +                       drive-strength = <10>;
> +               };
> +
> +               data {
> +                       pins = "sdc2_data";
> +                       bias-pull-up;
> +                       drive-strength = <10>;
> +               };
> +       };
> +
> +       sdc2_card_det_n: sd-card-det-n {
> +               pins = "gpio126";
> +               function = "gpio";
> +               bias-pull-up;
> +       };
> +};
> +
> +&uart6 {
> +       status = "okay";
> +
> +       bluetooth {
> +               compatible = "qcom,wcn3990-bt";
> +
> +               vddio-supply = <&vreg_s4a_1p8>;
> +               vddxo-supply = <&vreg_l7a_1p8>;
> +               vddrf-supply = <&vreg_l17a_1p3>;
> +               vddch0-supply = <&vreg_l25a_3p3>;
> +               max-speed = <3200000>;
> +       };
> +};
> +
> +&ufs_mem_hc {
> +       status = "okay";
> +
> +       reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
> +
> +       vcc-supply = <&vreg_l20a_2p95>;
> +       vcc-max-microamp = <800000>;
> +};
> +
> +&ufs_mem_phy {
> +       status = "okay";
> +
> +       vdda-phy-supply = <&vreg_l1a_0p875>;
> +       vdda-pll-supply = <&vreg_l26a_1p2>;
> +};
> +
> +&usb_1 {
> +       status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> +       dr_mode = "peripheral";
> +};
> +
> +&usb_1_hsphy {
> +       status = "okay";
> +
> +       vdd-supply = <&vreg_l1a_0p875>;
> +       vdda-pll-supply = <&vreg_l12a_1p8>;
> +       vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
> +
> +       qcom,imp-res-offset-value = <8>;
> +       qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
> +       qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
> +       qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
> +};
> +
> +&usb_1_qmpphy {
> +       status = "okay";
> +
> +       vdda-phy-supply = <&vreg_l26a_1p2>;
> +       vdda-pll-supply = <&vreg_l1a_0p875>;
> +};
> +
> +&wifi {
> +       status = "okay";
> +
> +       vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
> +       vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
> +       vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
> +       vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
> +};
> +
> +/* PINCTRL - additions to nodes defined in sdm845.dtsi */
> +
> +&qup_uart6_default {
> +       pinmux {
> +               pins = "gpio45", "gpio46", "gpio47", "gpio48";
> +               function = "qup6";
> +       };
> +
> +       cts {
> +               pins = "gpio45";
> +               bias-disable;
> +       };
> +
> +       rts-tx {
> +               pins = "gpio46", "gpio47";
> +               drive-strength = <2>;
> +               bias-disable;
> +       };
> +
> +       rx {
> +               pins = "gpio48";
> +               bias-pull-up;
> +       };
> +};
> --
> 2.7.4
>