Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH 05/33] ARM: dts: exynos: Correct S3C RTC bindings and
 enable it in Trats
To:     Krzysztof Kozlowski <krzk@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Kukjin Kim <kgene@kernel.org>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
        Denis GNUtoo Carikli <GNUtoo@cyberdimension.org>,
        Simon Shields <simon@lineageos.org>
Cc:     Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
        Sylwester Nawrocki <snawrocki@kernel.org>
From:   Marek Szyprowski <m.szyprowski@samsung.com>
Message-ID: <22b599d2-57a4-54d1-c68f-015e201a7415@samsung.com>
Date:   Mon, 31 Aug 2020 11:49:25 +0200
User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:68.0) Gecko/20100101
        Thunderbird/68.12.0
MIME-Version: 1.0
In-Reply-To: <20200830135200.24304-5-krzk@kernel.org>
Content-Transfer-Encoding: 7bit
Content-Language: en-US
Content-Type: text/plain; charset="utf-8"
CMS-TYPE: 201P
References: <20200830135200.24304-1-krzk@kernel.org>
        <CGME20200830135413eucas1p2c4db259433ffde5260a2fe85aa4b2570@eucas1p2.samsung.com>
        <20200830135200.24304-5-krzk@kernel.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk


On 30.08.2020 15:51, Krzysztof Kozlowski wrote:
> The S3C RTC requires 32768 Hz clock as input which is provided by PMIC
> (Maxim MAX8997).  However there is no clock provided for the PMIC and
> the driver registers the clock as regulator.  This is an old driver
> which will not be updated so add a workaround:
> 1. Enable the "clock" regulator in PMIC,
> 2. Add a fixed-clock to fill missing clock phandle reference in S3C RTC.
>
> This allows to enable the S3C RTC and fixes dtbs_check warnings:
>
>    arch/arm/boot/dts/exynos4210-trats.dt.yaml: rtc@10070000: clocks: [[5, 346]] is too short
>    arch/arm/boot/dts/exynos4210-trats.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Confirmed, this workaround enables s3c-rtc driver operation on this board.

Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>

> ---
>   arch/arm/boot/dts/exynos4210-trats.dts | 18 ++++++++++++++++++
>   1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
> index 5cc96f04a4fa..634f009b622e 100644
> --- a/arch/arm/boot/dts/exynos4210-trats.dts
> +++ b/arch/arm/boot/dts/exynos4210-trats.dts
> @@ -132,6 +132,13 @@
>   			compatible = "samsung,clock-xusbxti";
>   			clock-frequency = <24000000>;
>   		};
> +
> +		pmic_ap_clk: pmic-ap-clk {
> +			/* Workaround for missing clock on max8997 PMIC */
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <32768>;
> +		};
>   	};
>   
>   	thermal-zones {
> @@ -444,10 +451,21 @@
>   			     regulator-name = "SAFEOUT2";
>   			     regulator-boot-on;
>   			};
> +
> +			EN32KHZ_AP {
> +				regulator-name = "EN32KHZ_AP";
> +				regulator-always-on;
> +			};
>   		};
>   	};
>   };
>   
> +&rtc {
> +	status = "okay";
> +	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
> +	clock-names = "rtc", "rtc_src";
> +};
> +
>   &sdhci_0 {
>   	bus-width = <8>;
>   	non-removable;

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland