Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030382AbWEYUCm (ORCPT ); Thu, 25 May 2006 16:02:42 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1030380AbWEYUCm (ORCPT ); Thu, 25 May 2006 16:02:42 -0400 Received: from fep30-0.kolumbus.fi ([193.229.0.32]:1477 "EHLO fep30-app.kolumbus.fi") by vger.kernel.org with ESMTP id S1030382AbWEYUCj (ORCPT ); Thu, 25 May 2006 16:02:39 -0400 Date: Thu, 25 May 2006 23:02:29 +0300 (EEST) From: Kai Makisara X-X-Sender: makisara@kai.makisara.local To: James Lamanna cc: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org Subject: Re: [OOPS] amrestore dies in kmem_cache_free 2.6.16.18 - cannot restore backups! In-Reply-To: Message-ID: References: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 85261 Lines: 2430 I am adding linux-scsi to recipients (and quoting the whole message for readers of that list). On Tue, 23 May 2006, James Lamanna wrote: > So I was able to recreate this problem on a vanilla 2.6.16.18 with the > following oops.. > I'd say this is a serious regression since I cannot restore backups > anymore (I could with 2.6.14.x, but that kernel series had other > issues...) > > amrestore does manage to read 1 32k block from tape before dying. > > Any help would be greatly appreciated. > I have tried 'amrestore' on my machine with 2.6.16.18 but was not able to reproduce the problem. However, there are many differences in our setups: - mine is uniprocessor Athlon64, yours dual Opteron - my SCSI HBA sym53c1010, yours Adaptec 39160D (aic7899) - different tape drives (should not matter) - my compiler gcc version 4.0.2 20050901 (prerelease) (SUSE Linux), yours gcc version 3.4.3 20041125 (Gentoo 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7) > -- James Lamanna > > > Unable to handle kernel paging request at ffff82bc81000030 RIP: > {kmem_cache_free+82} > PGD 0 > Oops: 0000 [1] SMP > CPU 1 > Modules linked in: > Pid: 5814, comm: amrestore Not tainted 2.6.16.18 #2 > RIP: 0010:[] {kmem_cache_free+82} > RSP: 0018:ffff81007d4afcd8 EFLAGS: 00010086 > RAX: ffff82bc81000000 RBX: ffff81004119d800 RCX: 000000000000001e > RDX: ffff81000000c000 RSI: 0000000000000000 RDI: 00000007f0000000 > RBP: ffff81007ff0c800 R08: 0000000000000000 R09: 0000000000000400 > R10: 0000000000000000 R11: ffffffff8014b3d6 R12: ffff810041311480 > R13: 0000000000000400 R14: 0000000000000400 R15: ffff81007e676748 > FS: 00002b7f39708020(0000) GS:ffff810041173bc0(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > CR2: ffff82bc81000030 CR3: 000000007de09000 CR4: 00000000000006e0 > Process amrestore (pid: 5814, threadinfo ffff81007d4ae000, task > ffff81007e2f8ae0) > Stack: 0000000000000000 0000000000000246 ffff8100413c9bc0 ffff81007ff0c800 > ffff8100413c9bc0 ffffffff8016dfdc ffff8100413c9bc0 ffff81007fe25408 > 00000000ffffffea ffffffff803187e7 > Call Trace: {bio_free+48} > {scsi_execute_async+640} > {st_do_scsi+422} {st_sleep_done+0} > {st_read+855} > {autoremove_wake_function+0} > {vfs_read+171} {sys_read+69} > {system_call+126} This stack trace does not easily tell what is happening:-( Starting from the bottom, up to scsi_execute_async it looks like a tape read (st_sleep_done is in the trace because it is parameter to scsi_execute_async). Above that I can't visualize what is happening. scsi_execute_async does not call either bio_free or kmem_cache_free. > Code: 48 8b 48 30 0f b7 51 28 65 8b 04 25 30 00 00 00 39 c2 0f 84 > RIP {kmem_cache_free+82} RSP > CR2: ffff82bc81000030 > > dmesg: > Bootdata ok (command line is root=/dev/sda3 > netconsole=@10.20.2.30/eth1,10001@10.20.2.15/) > Linux version 2.6.16.18 (root@fs0) (gcc version 3.4.3 20041125 (Gentoo > 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #2 SMP Tue May 23 18:12:01 PDT 2006 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 0000000000099000 (usable) > BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000c2000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007ff20000 (usable) > BIOS-e820: 000000007ff20000 - 000000007ff2f000 (ACPI data) > BIOS-e820: 000000007ff2f000 - 000000007ff80000 (ACPI NVS) > BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f6f80 > ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ > 0x000000007ff2af87 > ACPI: FADT (v001 NVIDIA CK8S 0x06040000 PTL_ 0x000f4240) @ > 0x000000007ff2ec9e > ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ > 0x000000007ff2ed12 > ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @ > 0x000000007ff2ee9a > ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ > 0x000000007ff2ef62 > ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ > 0x000000007ff2efd8 > ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @ > 0x0000000000000000 > SRAT: PXM 0 -> APIC 0 -> Node 0 > SRAT: PXM 1 -> APIC 1 -> Node 1 > SRAT: Node 0 PXM 0 0-a0000 > SRAT: Node 0 PXM 0 0-40000000 > SRAT: Node 1 PXM 1 40000000-80000000 > NUMA: Using 30 for the hash shift. > Bootmem setup node 0 0000000000000000-0000000040000000 > Bootmem setup node 1 0000000040000000-000000007ff20000 > On node 0 totalpages: 257138 > DMA zone: 2618 pages, LIFO batch:0 > DMA32 zone: 254520 pages, LIFO batch:31 > Normal zone: 0 pages, LIFO batch:0 > HighMem zone: 0 pages, LIFO batch:0 > On node 1 totalpages: 258340 > DMA zone: 0 pages, LIFO batch:0 > DMA32 zone: 258340 pages, LIFO batch:31 > Normal zone: 0 pages, LIFO batch:0 > HighMem zone: 0 pages, LIFO batch:0 > Nvidia board detected. Ignoring ACPI timer override. > ACPI: PM-Timer IO Port: 0x8008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > Processor #0 15:5 APIC version 16 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > Processor #1 15:5 APIC version 16 > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 > ACPI: IOAPIC (id[0x03] address[0xdf200000] gsi_base[24]) > IOAPIC[1]: apic_id 3, version 17, address 0xdf200000, GSI 24-27 > ACPI: IOAPIC (id[0x04] address[0xdf201000] gsi_base[28]) > IOAPIC[2]: apic_id 4, version 17, address 0xdf201000, GSI 28-31 > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > ACPI: IRQ9 used by override. > Setting APIC routing to flat > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) > Checking aperture... > CPU 0: aperture @ 0 size 32 MB > No AGP bridge found > Built 2 zonelists > Kernel command line: root=/dev/sda3 > netconsole=@10.20.2.30/eth1,10001@10.20.2.15/ > netconsole: local port 6665 > netconsole: local IP 10.20.2.30 > netconsole: interface eth1 > netconsole: remote port 10001 > netconsole: remote IP 10.20.2.15 > netconsole: remote ethernet address ff:ff:ff:ff:ff:ff > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 131072 bytes) > Disabling vsyscall due to use of PM timer > time.c: Using 3.579545 MHz WALL PM GTOD PM timer. > time.c: Detected 2009.275 MHz processor. > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > Memory: 2058556k/2096256k available (3359k kernel code, 37288k > reserved, 1256k data, 228k init) > Calibrating delay using timer specific routine.. 4025.03 BogoMIPS > (lpj=8050070) > Mount-cache hash table entries: 256 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 1024K (64 bytes/line) > CPU 0(1) -> Node 0 -> Core 0 > Using local APIC timer interrupts. > result 12557984 > Detected 12.557 MHz APIC timer. > Booting processor 1/2 APIC 0x1 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 4018.81 BogoMIPS > (lpj=8037638) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 1024K (64 bytes/line) > CPU 1(1) -> Node 1 -> Core 0 > AMD Opteron(tm) Processor 246 stepping 0a > CPU 1: Syncing TSC to CPU 0. > CPU 1: synchronized TSC with CPU 0 (last diff -9 cycles, maxerr 1085 cycles) > Brought up 2 CPUs > testing NMI watchdog ... OK. > migration_cost=566 > DMI present. > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: Using configuration type 1 > ACPI: Subsystem revision 20060127 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 > Boot video device is 0000:01:06.0 > PCI: Transparent bridge - 0000:00:09.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] > ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0 > ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0 > ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0 > ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0 > ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0 > ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0 > ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0 > ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Root Bridge [PCI2] (0000:08) > PCI: Probing PCI hardware (bus 08) > ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PA._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PB._PRT] > SCSI subsystem initialized > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > PCI-DMA: Disabling IOMMU. > PCI: Bridge: 0000:00:09.0 > IO window: 2000-2fff > MEM window: dd100000-deffffff > PREFETCH window: 88000000-880fffff > PCI: Bridge: 0000:00:0d.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:0e.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Setting latency timer of device 0000:00:09.0 to 64 > PCI: Setting latency timer of device 0000:00:0d.0 to 64 > PCI: Setting latency timer of device 0000:00:0e.0 to 64 > PCI: Failed to allocate mem resource #6:100000@e0000000 for 0000:09:02.0 > PCI: Failed to allocate mem resource #6:100000@e0000000 for 0000:09:02.1 > PCI: Bridge: 0000:08:0a.0 > IO window: 3000-3fff > MEM window: df300000-df3fffff > PREFETCH window: df800000-dfffffff > PCI: Bridge: 0000:08:0b.0 > IO window: 4000-4fff > MEM window: df400000-df4fffff > PREFETCH window: 88100000-881fffff > Simple Boot Flag at 0x36 set to 0x1 > IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ > Total HugeTLB memory allocated, 0 > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > SGI XFS with ACLs, security attributes, large block/inode numbers, no > debug enabled > SGI XFS Quota Management subsystem > io scheduler noop registered > io scheduler deadline registered (default) > io scheduler cfq registered > PCI: MSI quirk detected. pci_msi_quirk set. > PCI: MSI quirk detected. pci_msi_quirk set. > PCI: Setting latency timer of device 0000:00:0d.0 to 64 > pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS > assign_interrupt_mode Found MSI capability > PCI: MSI quirk detected. MSI disabled. > Allocate Port Service[0000:00:0d.0:pcie00] > PCI: Setting latency timer of device 0000:00:0e.0 to 64 > pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:0e.0:pcie00] > ACPI: Power Button (FF) [PWRF] > ACPI: Power Button (CM) [PWRB] > Real Time Clock Driver v1.12ac > Linux agpgart interface v0.101 (c) Dave Jones > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > isa bounce pool size: 16 pages > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > loop: loaded (max 8 devices) > e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI > e100: Copyright(c) 1999-2005 Intel Corporation > ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 19 > GSI 16 sharing vector 0xB1 and IRQ 16 > ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK3] -> GSI 19 (level, > high) -> IRQ 177 > e100: eth0: e100_probe: addr 0xdd101000, irq 177, MAC addr 00:E0:81:30:33:CE > tg3.c:v3.49 (Feb 2, 2006) > GSI 17 sharing vector 0xB9 and IRQ 17 > ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 28 (level, low) -> IRQ 185 > eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] > (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:30:d7:f8 > eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] > eth1: dma_rwctrl[763f0000] dma_mask[64-bit] > GSI 18 sharing vector 0xC1 and IRQ 18 > ACPI: PCI Interrupt 0000:0a:09.1[B] -> GSI 29 (level, low) -> IRQ 193 > eth2: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] > (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:30:d7:f9 > eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] > eth2: dma_rwctrl[763f0000] dma_mask[64-bit] > tun: Universal TUN/TAP device driver, 1.6 > tun: (C) 1999-2004 Max Krasnyansky > netconsole: device eth1 not up yet, forcing it > tg3: eth1: Link is up at 1000 Mbps, full duplex. > tg3: eth1: Flow control is off for TX and off for RX. > netconsole: network logging started > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 > NFORCE-CK804: chipset revision 162 > NFORCE-CK804: not 100% native mode: will probe irqs later > NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller > ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:pio, hdd:pio > Probing IDE interface ide0... > hda: SONY CD-ROM CDU5225, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > Probing IDE interface ide1... > hda: ATAPI 52X CD-ROM drive, 96kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > GSI 19 sharing vector 0xC9 and IRQ 19 > ACPI: PCI Interrupt 0000:0a:03.0[A] -> GSI 30 (level, low) -> IRQ 201 > scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 > > aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs > > Vendor: DELL Model: PV-132T Rev: 308D > Type: Medium Changer ANSI SCSI revision: 02 > target0:0:0: Beginning Domain Validation > target0:0:0: Ending Domain Validation > Vendor: IBM Model: ULTRIUM-TD2 Rev: 53Y3 > Type: Sequential-Access ANSI SCSI revision: 03 > target0:0:1: Beginning Domain Validation > target0:0:1: wide asynchronous > target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) > target0:0:1: Ending Domain Validation > GSI 20 sharing vector 0xD1 and IRQ 20 > ACPI: PCI Interrupt 0000:0a:03.1[B] -> GSI 31 (level, low) -> IRQ 209 > scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 > > aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs > > 3ware Storage Controller device driver for Linux v1.26.02.001. > 3ware 9000 Storage Controller device driver for Linux v2.26.02.007. > GSI 21 sharing vector 0xD9 and IRQ 21 > ACPI: PCI Interrupt 0000:09:03.0[A] -> GSI 27 (level, low) -> IRQ 217 > scsi2 : 3ware 9000 Storage Controller > 3w-9xxx: scsi2: Found a 3ware 9000 Storage Controller at 0xdf340000, IRQ: 217. > 3w-9xxx: scsi2: Firmware FE9X 2.06.00.009, BIOS BE9X 2.03.01.051, Ports: 8. > Vendor: AMCC Model: 9500S-8 DISK Rev: 2.06 > Type: Direct-Access ANSI SCSI revision: 03 > libata version 1.20 loaded. > st: Version 20050830, fixed bufsize 32768, s/g segs 256 > st 0:0:1:0: Attached scsi tape st0<4>st0: try direct i/o: yes (alignment 512 > B) > SCSI device sda: 1757749248 512-byte hdwr sectors (899968 MB) > sda: Write Protect is off > sda: Mode Sense: 23 00 00 00 > SCSI device sda: drive cache: write back, no read (daft) > SCSI device sda: 1757749248 512-byte hdwr sectors (899968 MB) > sda: Write Protect is off > sda: Mode Sense: 23 00 00 00 > SCSI device sda: drive cache: write back, no read (daft) > sda: sda1 sda2 sda3 sda4 < sda5 > > sd 2:0:0:0: Attached scsi disk sda > 0:0:0:0: Attached scsi generic sg0 type 8 > st 0:0:1:0: Attached scsi generic sg1 type 1 > sd 2:0:0:0: Attached scsi generic sg2 type 0 > SCSI Media Changer driver v0.25 > ch0: type #1 (mt): 0x1+1 [medium transport] > ch0: type #2 (st): 0x1000+23 [storage] > ch0: type #3 (ie): 0x10+1 [import/export] > ch0: type #4 (dt): 0x100+1 [data transfer] > ch0: dt 0x100: ID 1, LUN 0, name: IBM ULTRIUM-TD2 53Y3 > ch0: INITIALIZE ELEMENT STATUS, may take some time ... > ch0: ... finished > ch 0:0:0:0: Attached scsi changer ch0 > Fusion MPT base driver 3.03.07 > Copyright (c) 1999-2005 LSI Logic Corporation > Fusion MPT FC Host driver 3.03.07 > GSI 22 sharing vector 0xE1 and IRQ 22 > ACPI: PCI Interrupt 0000:09:02.0[A] -> GSI 26 (level, low) -> IRQ 225 > mptbase: Initiating ioc0 bringup > ioc0: FC929XL: Capabilities={Initiator,Target,LAN} > scsi3 : ioc0: LSIFC929XL, FwRev=01020b00h, Ports=1, MaxQ=1023, IRQ=225 > ACPI: PCI Interrupt 0000:09:02.1[B] -> GSI 27 (level, low) -> IRQ 217 > mptbase: Initiating ioc1 bringup > ioc1: FC929XL: Capabilities={Initiator,Target,LAN} > Vendor: APPLE Model: Xse<6>scsi4 : ioc1: LSIFC929XL, > FwRev=01020b00h, Ports=1, MaxQ=1023, IRQ=217 > rve RAID Rev: 1.50 > Type: Direct-Access ANSI SCSI revision: > 05<5>usbmon: debugfs is not available > > ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23 > GSI 23 sharing vector 0xE9 and IRQ 23 > ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 23 (level, > high) -> IRQ 233 > PCI: Setting latency timer of device 0000:00:02.1 to 64 > ehci_hcd 0000:00:02.1: EHCI Host Controller > ehci_hcd 0000:00:02.1: debug port 1 > PCI: cache line size of 64 is not supported by device 0000:00:02.1 > ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:02.1: irq 233, io mem 0xdd001000 > ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > Vendor: AP<6>usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 10 ports detected > PLE Model: Xserve RAID Rev: 1.50 > Type: Direct-Access ANSI SCSI revision: 05 > sdb : very big device. try to use READ CAPACITY(16). > sdc : very big device. try to use READ CAPACITY(16). > SCSI device sdb: 5860573184 512-byte hdwr sectors (3000613 MB) > SCSI device sdc: 5860573184 512-byte hdwr sectors (3000613 MB) > sdb: Write Protect is off > sdb: Mode Sense: ad 00 00 08 > sdc: Write Protect is off > sdc: Mode Sense: ad 00 00 08 > SCSI device sdb: drive cache: write back > SCSI device sdc: drive cache: write back > sdb : very big device. try to use READ CAPACITY(16). > sdc : very big device. try to use READ CAPACITY(16). > SCSI device sdb: 5860573184 512-byte hdwr sectors (3000613 MB) > SCSI device sdc: 5860573184 512-byte hdwr sectors (3000613 MB) > sdb: Write Protect is off > sdb: Mode Sense: ad 00 00 08 > sdc: Write Protect is off > sdc: Mode Sense: ad 00 00 08 > SCSI device sdb: drive cache: write back > sdb:<5>SCSI device sdc: drive cache: write back > sdc: unknown partition table > sd 3:0:0:0: Attached scsi disk sdb > unknown partition table > sd 4:0:0:0: Attached scsi disk sdc > sd 3:0:0:0: Attached scsi generic sg3 type 0 > sd 4:0:0:0: Attached scsi generic sg4 type 0 > ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) > ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 > GSI 24 sharing vector 0x32 and IRQ 24 > ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, > high) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:02.0 to 64 > ohci_hcd 0000:00:02.0: OHCI Host Controller > ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:00:02.0: irq 50, io mem 0xdd000000 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 10 ports detected > USB Universal Host Controller Interface driver v2.3 > usb 2-3: new low speed USB device using ohci_hcd and address 2 > usb 2-3: configuration #1 chosen from 1 choice > usbcore: registered new driver usblp > drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver > Initializing USB Mass Storage driver... > usbcore: registered new driver usb-storage > USB Mass Storage support registered. > input: BTC USB Multimedia Keyboard as /class/input/input0 > input: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on > usb-0000:00:02.0-3 > input: BTC USB Multimedia Keyboard as /class/input/input1 > input: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on > input: usb-0000:00:02.0-3 > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > mice: PS/2 mouse device common for all mice > md: linear personality registered for level -1 > md: raid0 personality registered for level 0 > md: raid1 personality registered for level 1 > md: raid5 personality registered for level 5 > md: raid4 personality registered for level 4 > raid5: automatically using best checksumming function: generic_sse > generic_sse: 6155.000 MB/sec > raid5: using function: generic_sse (6155.000 MB/sec) > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 > md: bitmap version 4.39 > device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com > NET: Registered protocol family 2 > IP route cache hash table entries: 65536 (order: 7, 524288 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 10 > IPv6 over IPv4 tunneling driver > NET: Registered protocol family 17 > powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.0) > powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 (1500 mV) > powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV) > powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0xe (1200 mV) > cpu_init done, current fid 0xc, vid 0x2 > powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 (1500 mV) > powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV) > powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0xe (1200 mV) > cpu_init done, current fid 0xc, vid 0x2 > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > ReiserFS: sda3: found reiserfs format "3.6" with standard journal > input: AT Translated Set 2 keyboard as /class/input/input2 > ReiserFS: sda3: using ordered data mode > ReiserFS: sda3: journal params: device sda3, size 8192, journal first > block 18, max trans len 1024, max batch 900, max commit age 30, max > trans age 30 > ReiserFS: sda3: checking transaction log (sda3) > ReiserFS: sda3: Using r5 hash to sort names > VFS: Mounted root (reiserfs filesystem) readonly. > Freeing unused kernel memory: 228k freed > Adding 3911816k swap on /dev/sda2. Priority:-1 extents:1 across:3911816k > md: md0 stopped. > md: md0 stopped. > md: bind > md: bind > md0: setting max_sectors to 128, segment boundary to 32767 > raid0: looking at sdb > raid0: comparing sdb(2930286528) with sdb(2930286528) > raid0: END > raid0: ==> UNIQUE > raid0: 1 zones > raid0: looking at sdc > raid0: comparing sdc(2930286528) with sdb(2930286528) > raid0: EQUAL > raid0: FINAL 1 zones > raid0: done. > raid0 : md_size is 5860573056 blocks. > raid0 : conf->hash_spacing is 5860573056 blocks. > raid0 : nb_zone is 2. > raid0 : Allocating 16 bytes for hash. > XFS: osyncisdsync is now the default, option is deprecated. > XFS mounting filesystem dm-1 > Ending clean XFS mount for filesystem: dm-1 > XFS: osyncisdsync is now the default, option is deprecated. > XFS mounting filesystem dm-0 > Ending clean XFS mount for filesystem: dm-0 > XFS: osyncisdsync is now the default, option is deprecated. > XFS mounting filesystem md0 > Ending clean XFS mount for filesystem: md0 > eth1: no IPv6 routers present > st0: Block limits 1 - 16777215 bytes. > > > .config: > # > # Automatically generated make config: don't edit > # Linux kernel version: 2.6.16.18 > # Tue May 23 18:09:27 2006 > # > CONFIG_X86_64=y > CONFIG_64BIT=y > CONFIG_X86=y > CONFIG_SEMAPHORE_SLEEPERS=y > CONFIG_MMU=y > CONFIG_RWSEM_GENERIC_SPINLOCK=y > CONFIG_GENERIC_CALIBRATE_DELAY=y > CONFIG_X86_CMPXCHG=y > CONFIG_EARLY_PRINTK=y > CONFIG_GENERIC_ISA_DMA=y > CONFIG_GENERIC_IOMAP=y > CONFIG_ARCH_MAY_HAVE_PC_FDC=y > CONFIG_DMI=y > > # > # Code maturity level options > # > CONFIG_EXPERIMENTAL=y > CONFIG_LOCK_KERNEL=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > > # > # General setup > # > CONFIG_LOCALVERSION="" > CONFIG_LOCALVERSION_AUTO=y > CONFIG_SWAP=y > CONFIG_SYSVIPC=y > # CONFIG_POSIX_MQUEUE is not set > # CONFIG_BSD_PROCESS_ACCT is not set > CONFIG_SYSCTL=y > # CONFIG_AUDIT is not set > CONFIG_IKCONFIG=y > CONFIG_IKCONFIG_PROC=y > # CONFIG_CPUSETS is not set > CONFIG_INITRAMFS_SOURCE="" > CONFIG_UID16=y > CONFIG_VM86=y > CONFIG_CC_OPTIMIZE_FOR_SIZE=y > # CONFIG_EMBEDDED is not set > CONFIG_KALLSYMS=y > # CONFIG_KALLSYMS_EXTRA_PASS is not set > CONFIG_HOTPLUG=y > CONFIG_PRINTK=y > CONFIG_BUG=y > CONFIG_ELF_CORE=y > CONFIG_BASE_FULL=y > CONFIG_FUTEX=y > CONFIG_EPOLL=y > CONFIG_SHMEM=y > CONFIG_CC_ALIGN_FUNCTIONS=0 > CONFIG_CC_ALIGN_LABELS=0 > CONFIG_CC_ALIGN_LOOPS=0 > CONFIG_CC_ALIGN_JUMPS=0 > CONFIG_SLAB=y > # CONFIG_TINY_SHMEM is not set > CONFIG_BASE_SMALL=0 > # CONFIG_SLOB is not set > > # > # Loadable module support > # > CONFIG_MODULES=y > CONFIG_MODULE_UNLOAD=y > # CONFIG_MODULE_FORCE_UNLOAD is not set > CONFIG_OBSOLETE_MODPARM=y > # CONFIG_MODVERSIONS is not set > # CONFIG_MODULE_SRCVERSION_ALL is not set > # CONFIG_KMOD is not set > CONFIG_STOP_MACHINE=y > > # > # Block layer > # > CONFIG_LBD=y > > # > # IO Schedulers > # > CONFIG_IOSCHED_NOOP=y > # CONFIG_IOSCHED_AS is not set > CONFIG_IOSCHED_DEADLINE=y > CONFIG_IOSCHED_CFQ=y > # CONFIG_DEFAULT_AS is not set > CONFIG_DEFAULT_DEADLINE=y > # CONFIG_DEFAULT_CFQ is not set > # CONFIG_DEFAULT_NOOP is not set > CONFIG_DEFAULT_IOSCHED="deadline" > > # > # Processor type and features > # > CONFIG_X86_PC=y > # CONFIG_X86_VSMP is not set > CONFIG_MK8=y > # CONFIG_MPSC is not set > # CONFIG_GENERIC_CPU is not set > CONFIG_X86_L1_CACHE_BYTES=64 > CONFIG_X86_L1_CACHE_SHIFT=6 > CONFIG_X86_TSC=y > CONFIG_X86_GOOD_APIC=y > # CONFIG_MICROCODE is not set > CONFIG_X86_MSR=y > CONFIG_X86_CPUID=y > CONFIG_X86_IO_APIC=y > CONFIG_X86_LOCAL_APIC=y > CONFIG_MTRR=y > CONFIG_SMP=y > CONFIG_SCHED_SMT=y > CONFIG_PREEMPT_NONE=y > # CONFIG_PREEMPT_VOLUNTARY is not set > # CONFIG_PREEMPT is not set > CONFIG_PREEMPT_BKL=y > CONFIG_NUMA=y > CONFIG_K8_NUMA=y > CONFIG_X86_64_ACPI_NUMA=y > # CONFIG_NUMA_EMU is not set > CONFIG_ARCH_DISCONTIGMEM_ENABLE=y > CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y > CONFIG_ARCH_SPARSEMEM_ENABLE=y > CONFIG_SELECT_MEMORY_MODEL=y > # CONFIG_FLATMEM_MANUAL is not set > CONFIG_DISCONTIGMEM_MANUAL=y > # CONFIG_SPARSEMEM_MANUAL is not set > CONFIG_DISCONTIGMEM=y > CONFIG_FLAT_NODE_MEM_MAP=y > CONFIG_NEED_MULTIPLE_NODES=y > # CONFIG_SPARSEMEM_STATIC is not set > CONFIG_SPLIT_PTLOCK_CPUS=4 > > > > CONFIG_MIGRATION=y > CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y > CONFIG_NR_CPUS=32 > # CONFIG_HOTPLUG_CPU is not set > CONFIG_HPET_TIMER=y > CONFIG_HPET_EMULATE_RTC=y > CONFIG_GART_IOMMU=y > CONFIG_SWIOTLB=y > CONFIG_X86_MCE=y > CONFIG_X86_MCE_INTEL=y > CONFIG_X86_MCE_AMD=y > # CONFIG_KEXEC is not set > # CONFIG_CRASH_DUMP is not set > CONFIG_PHYSICAL_START=0x100000 > CONFIG_SECCOMP=y > # CONFIG_HZ_100 is not set > CONFIG_HZ_250=y > # CONFIG_HZ_1000 is not set > CONFIG_HZ=250 > CONFIG_GENERIC_HARDIRQS=y > CONFIG_GENERIC_IRQ_PROBE=y > CONFIG_ISA_DMA_API=y > CONFIG_GENERIC_PENDING_IRQ=y > > # > # Power management options > # > CONFIG_PM=y > CONFIG_PM_LEGACY=y > # CONFIG_PM_DEBUG is not set > > # > # ACPI (Advanced Configuration and Power Interface) Support > # > CONFIG_ACPI=y > CONFIG_ACPI_AC=y > CONFIG_ACPI_BATTERY=y > CONFIG_ACPI_BUTTON=y > # CONFIG_ACPI_VIDEO is not set > # CONFIG_ACPI_HOTKEY is not set > CONFIG_ACPI_FAN=y > CONFIG_ACPI_PROCESSOR=y > CONFIG_ACPI_THERMAL=y > CONFIG_ACPI_NUMA=y > # CONFIG_ACPI_ASUS is not set > # CONFIG_ACPI_IBM is not set > CONFIG_ACPI_TOSHIBA=y > CONFIG_ACPI_BLACKLIST_YEAR=0 > # CONFIG_ACPI_DEBUG is not set > CONFIG_ACPI_EC=y > CONFIG_ACPI_POWER=y > CONFIG_ACPI_SYSTEM=y > CONFIG_X86_PM_TIMER=y > # CONFIG_ACPI_CONTAINER is not set > > # > # CPU Frequency scaling > # > CONFIG_CPU_FREQ=y > CONFIG_CPU_FREQ_TABLE=y > # CONFIG_CPU_FREQ_DEBUG is not set > CONFIG_CPU_FREQ_STAT=y > # CONFIG_CPU_FREQ_STAT_DETAILS is not set > CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y > # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set > CONFIG_CPU_FREQ_GOV_USERSPACE=y > CONFIG_CPU_FREQ_GOV_ONDEMAND=y > # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set > > # > # CPUFreq processor drivers > # > CONFIG_X86_POWERNOW_K8=y > CONFIG_X86_POWERNOW_K8_ACPI=y > # CONFIG_X86_SPEEDSTEP_CENTRINO is not set > CONFIG_X86_ACPI_CPUFREQ=y > > # > # shared options > # > CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y > # CONFIG_X86_SPEEDSTEP_LIB is not set > > # > # Bus options (PCI etc.) > # > CONFIG_PCI=y > CONFIG_PCI_DIRECT=y > CONFIG_PCI_MMCONFIG=y > # CONFIG_UNORDERED_IO is not set > CONFIG_PCIEPORTBUS=y > CONFIG_PCI_MSI=y > # CONFIG_PCI_LEGACY_PROC is not set > > # > # PCCARD (PCMCIA/CardBus) support > # > #CONFIG_PCCARD is not set > > # > # PCI Hotplug Support > # > #CONFIG_HOTPLUG_PCI is not set > > # > # Executable file formats / Emulations > # > CONFIG_BINFMT_ELF=y > # CONFIG_BINFMT_MISC is not set > CONFIG_IA32_EMULATION=y > CONFIG_IA32_AOUT=y > CONFIG_COMPAT=y > CONFIG_SYSVIPC_COMPAT=y > > # > # Networking > # > CONFIG_NET=y > > # > # Networking options > # > #CONFIG_NETDEBUG is not set > CONFIG_PACKET=y > # CONFIG_PACKET_MMAP is not set > CONFIG_UNIX=y > # CONFIG_NET_KEY is not set > CONFIG_INET=y > CONFIG_IP_MULTICAST=y > # CONFIG_IP_ADVANCED_ROUTER is not set > CONFIG_IP_FIB_HASH=y > CONFIG_IP_PNP=y > CONFIG_IP_PNP_DHCP=y > # CONFIG_IP_PNP_BOOTP is not set > # CONFIG_IP_PNP_RARP is not set > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE is not set > # CONFIG_IP_MROUTE is not set > # CONFIG_ARPD is not set > # CONFIG_SYN_COOKIES is not set > # CONFIG_INET_AH is not set > # CONFIG_INET_ESP is not set > # CONFIG_INET_IPCOMP is not set > # CONFIG_INET_TUNNEL is not set > CONFIG_INET_DIAG=y > CONFIG_INET_TCP_DIAG=y > # CONFIG_TCP_CONG_ADVANCED is not set > CONFIG_TCP_CONG_BIC=y > CONFIG_IPV6=y > # CONFIG_IPV6_PRIVACY is not set > # CONFIG_INET6_AH is not set > # CONFIG_INET6_ESP is not set > # CONFIG_INET6_IPCOMP is not set > # CONFIG_INET6_TUNNEL is not set > # CONFIG_IPV6_TUNNEL is not set > # CONFIG_NETFILTER is not set > > # > # DCCP Configuration (EXPERIMENTAL) > # > #CONFIG_IP_DCCP is not set > > # > # SCTP Configuration (EXPERIMENTAL) > # > #CONFIG_IP_SCTP is not set > > # > # TIPC Configuration (EXPERIMENTAL) > # > # CONFIG_TIPC is not set > # CONFIG_ATM is not set > # CONFIG_BRIDGE is not set > # CONFIG_VLAN_8021Q is not set > # CONFIG_DECNET is not set > # CONFIG_LLC2 is not set > # CONFIG_IPX is not set > # CONFIG_ATALK is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_NET_DIVERT is not set > # CONFIG_ECONET is not set > # CONFIG_WAN_ROUTER is not set > > # > # QoS and/or fair queueing > # > #CONFIG_NET_SCHED is not set > > # > # Network testing > # > # CONFIG_NET_PKTGEN is not set > # CONFIG_HAMRADIO is not set > # CONFIG_IRDA is not set > # CONFIG_BT is not set > # CONFIG_IEEE80211 is not set > > # > # Device Drivers > # > > # > # Generic Driver Options > # > CONFIG_STANDALONE=y > CONFIG_PREVENT_FIRMWARE_BUILD=y > # CONFIG_FW_LOADER is not set > > # > # Connector - unified userspace <-> kernelspace linker > # > #CONFIG_CONNECTOR is not set > > # > # Memory Technology Devices (MTD) > # > #CONFIG_MTD is not set > > # > # Parallel port support > # > #CONFIG_PARPORT is not set > > # > # Plug and Play support > # > #CONFIG_PNP is not set > > # > # Block devices > # > CONFIG_BLK_DEV_FD=y > # CONFIG_BLK_CPQ_DA is not set > # CONFIG_BLK_CPQ_CISS_DA is not set > # CONFIG_BLK_DEV_DAC960 is not set > # CONFIG_BLK_DEV_UMEM is not set > # CONFIG_BLK_DEV_COW_COMMON is not set > CONFIG_BLK_DEV_LOOP=y > # CONFIG_BLK_DEV_CRYPTOLOOP is not set > # CONFIG_BLK_DEV_NBD is not set > # CONFIG_BLK_DEV_SX8 is not set > # CONFIG_BLK_DEV_UB is not set > CONFIG_BLK_DEV_RAM=y > CONFIG_BLK_DEV_RAM_COUNT=16 > CONFIG_BLK_DEV_RAM_SIZE=4096 > CONFIG_BLK_DEV_INITRD=y > # CONFIG_CDROM_PKTCDVD is not set > # CONFIG_ATA_OVER_ETH is not set > > # > # ATA/ATAPI/MFM/RLL support > # > CONFIG_IDE=y > CONFIG_BLK_DEV_IDE=y > > # > # Please see Documentation/ide.txt for help/info on IDE drives > # > # CONFIG_BLK_DEV_IDE_SATA is not set > # CONFIG_BLK_DEV_HD_IDE is not set > CONFIG_BLK_DEV_IDEDISK=y > CONFIG_IDEDISK_MULTI_MODE=y > CONFIG_BLK_DEV_IDECD=y > # CONFIG_BLK_DEV_IDETAPE is not set > # CONFIG_BLK_DEV_IDEFLOPPY is not set > # CONFIG_BLK_DEV_IDESCSI is not set > # CONFIG_IDE_TASK_IOCTL is not set > > # > # IDE chipset support/bugfixes > # > CONFIG_IDE_GENERIC=y > # CONFIG_BLK_DEV_CMD640 is not set > CONFIG_BLK_DEV_IDEPCI=y > # CONFIG_IDEPCI_SHARE_IRQ is not set > # CONFIG_BLK_DEV_OFFBOARD is not set > # CONFIG_BLK_DEV_GENERIC is not set > # CONFIG_BLK_DEV_OPTI621 is not set > # CONFIG_BLK_DEV_RZ1000 is not set > CONFIG_BLK_DEV_IDEDMA_PCI=y > # CONFIG_BLK_DEV_IDEDMA_FORCED is not set > CONFIG_IDEDMA_PCI_AUTO=y > # CONFIG_IDEDMA_ONLYDISK is not set > # CONFIG_BLK_DEV_AEC62XX is not set > # CONFIG_BLK_DEV_ALI15X3 is not set > CONFIG_BLK_DEV_AMD74XX=y > # CONFIG_BLK_DEV_ATIIXP is not set > # CONFIG_BLK_DEV_CMD64X is not set > # CONFIG_BLK_DEV_TRIFLEX is not set > # CONFIG_BLK_DEV_CY82C693 is not set > # CONFIG_BLK_DEV_CS5520 is not set > # CONFIG_BLK_DEV_CS5530 is not set > # CONFIG_BLK_DEV_HPT34X is not set > # CONFIG_BLK_DEV_HPT366 is not set > # CONFIG_BLK_DEV_SC1200 is not set > CONFIG_BLK_DEV_PIIX=y > # CONFIG_BLK_DEV_IT821X is not set > # CONFIG_BLK_DEV_NS87415 is not set > # CONFIG_BLK_DEV_PDC202XX_OLD is not set > CONFIG_BLK_DEV_PDC202XX_NEW=y > # CONFIG_BLK_DEV_SVWKS is not set > # CONFIG_BLK_DEV_SIIMAGE is not set > # CONFIG_BLK_DEV_SIS5513 is not set > # CONFIG_BLK_DEV_SLC90E66 is not set > # CONFIG_BLK_DEV_TRM290 is not set > # CONFIG_BLK_DEV_VIA82CXXX is not set > # CONFIG_IDE_ARM is not set > CONFIG_BLK_DEV_IDEDMA=y > # CONFIG_IDEDMA_IVB is not set > CONFIG_IDEDMA_AUTO=y > # CONFIG_BLK_DEV_HD is not set > > # > # SCSI device support > # > CONFIG_RAID_ATTRS=y > CONFIG_SCSI=y > # CONFIG_SCSI_PROC_FS is not set > > # > # SCSI support type (disk, tape, CD-ROM) > # > CONFIG_BLK_DEV_SD=y > CONFIG_CHR_DEV_ST=y > # CONFIG_CHR_DEV_OSST is not set > # CONFIG_BLK_DEV_SR is not set > CONFIG_CHR_DEV_SG=y > CONFIG_CHR_DEV_SCH=y > > # > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs > # > # CONFIG_SCSI_MULTI_LUN is not set > # CONFIG_SCSI_CONSTANTS is not set > # CONFIG_SCSI_LOGGING is not set > > # > # SCSI Transport Attributes > # > CONFIG_SCSI_SPI_ATTRS=y > CONFIG_SCSI_FC_ATTRS=y > # CONFIG_SCSI_ISCSI_ATTRS is not set > # CONFIG_SCSI_SAS_ATTRS is not set > > # > # SCSI low-level drivers > # > #CONFIG_ISCSI_TCP is not set > CONFIG_BLK_DEV_3W_XXXX_RAID=y > CONFIG_SCSI_3W_9XXX=y > # CONFIG_SCSI_ACARD is not set > # CONFIG_SCSI_AACRAID is not set > CONFIG_SCSI_AIC7XXX=y > CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 > CONFIG_AIC7XXX_RESET_DELAY_MS=15000 > CONFIG_AIC7XXX_DEBUG_ENABLE=y > CONFIG_AIC7XXX_DEBUG_MASK=0 > CONFIG_AIC7XXX_REG_PRETTY_PRINT=y > # CONFIG_SCSI_AIC7XXX_OLD is not set > CONFIG_SCSI_AIC79XX=y > CONFIG_AIC79XX_CMDS_PER_DEVICE=32 > CONFIG_AIC79XX_RESET_DELAY_MS=4000 > # CONFIG_AIC79XX_ENABLE_RD_STRM is not set > # CONFIG_AIC79XX_DEBUG_ENABLE is not set > CONFIG_AIC79XX_DEBUG_MASK=0 > # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set > # CONFIG_MEGARAID_NEWGEN is not set > # CONFIG_MEGARAID_LEGACY is not set > # CONFIG_MEGARAID_SAS is not set > CONFIG_SCSI_SATA=y > # CONFIG_SCSI_SATA_AHCI is not set > # CONFIG_SCSI_SATA_SVW is not set > CONFIG_SCSI_ATA_PIIX=y > # CONFIG_SCSI_SATA_MV is not set > # CONFIG_SCSI_SATA_NV is not set > # CONFIG_SCSI_PDC_ADMA is not set > # CONFIG_SCSI_SATA_QSTOR is not set > # CONFIG_SCSI_SATA_PROMISE is not set > # CONFIG_SCSI_SATA_SX4 is not set > # CONFIG_SCSI_SATA_SIL is not set > # CONFIG_SCSI_SATA_SIL24 is not set > # CONFIG_SCSI_SATA_SIS is not set > # CONFIG_SCSI_SATA_ULI is not set > CONFIG_SCSI_SATA_VIA=y > # CONFIG_SCSI_SATA_VITESSE is not set > CONFIG_SCSI_SATA_INTEL_COMBINED=y > # CONFIG_SCSI_BUSLOGIC is not set > # CONFIG_SCSI_DMX3191D is not set > # CONFIG_SCSI_EATA is not set > # CONFIG_SCSI_FUTURE_DOMAIN is not set > # CONFIG_SCSI_GDTH is not set > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INITIO is not set > # CONFIG_SCSI_INIA100 is not set > # CONFIG_SCSI_SYM53C8XX_2 is not set > # CONFIG_SCSI_IPR is not set > # CONFIG_SCSI_QLOGIC_FC is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > # CONFIG_SCSI_QLA_FC is not set > # CONFIG_SCSI_LPFC is not set > # CONFIG_SCSI_DC395x is not set > # CONFIG_SCSI_DC390T is not set > # CONFIG_SCSI_DEBUG is not set > > # > # Multi-device support (RAID and LVM) > # > CONFIG_MD=y > CONFIG_BLK_DEV_MD=y > CONFIG_MD_LINEAR=y > CONFIG_MD_RAID0=y > CONFIG_MD_RAID1=y > # CONFIG_MD_RAID10 is not set > CONFIG_MD_RAID5=y > # CONFIG_MD_RAID6 is not set > # CONFIG_MD_MULTIPATH is not set > # CONFIG_MD_FAULTY is not set > CONFIG_BLK_DEV_DM=y > # CONFIG_DM_CRYPT is not set > # CONFIG_DM_SNAPSHOT is not set > # CONFIG_DM_MIRROR is not set > # CONFIG_DM_ZERO is not set > # CONFIG_DM_MULTIPATH is not set > > # > # Fusion MPT device support > # > CONFIG_FUSION=y > # CONFIG_FUSION_SPI is not set > CONFIG_FUSION_FC=y > # CONFIG_FUSION_SAS is not set > CONFIG_FUSION_MAX_SGE=128 > # CONFIG_FUSION_CTL is not set > # CONFIG_FUSION_LAN is not set > > # > # IEEE 1394 (FireWire) support > # > #CONFIG_IEEE1394 is not set > > # > # I2O device support > # > #CONFIG_I2O is not set > > # > # Network device support > # > CONFIG_NETDEVICES=y > # CONFIG_DUMMY is not set > # CONFIG_BONDING is not set > # CONFIG_EQUALIZER is not set > CONFIG_TUN=y > > # > # ARCnet devices > # > #CONFIG_ARCNET is not set > > # > # PHY device support > # > #CONFIG_PHYLIB is not set > > # > # Ethernet (10 or 100Mbit) > # > CONFIG_NET_ETHERNET=y > CONFIG_MII=y > # CONFIG_HAPPYMEAL is not set > # CONFIG_SUNGEM is not set > # CONFIG_CASSINI is not set > # CONFIG_NET_VENDOR_3COM is not set > > # > # Tulip family network device support > # > # CONFIG_NET_TULIP is not set > # CONFIG_HP100 is not set > CONFIG_NET_PCI=y > # CONFIG_PCNET32 is not set > # CONFIG_AMD8111_ETH is not set > # CONFIG_ADAPTEC_STARFIRE is not set > # CONFIG_B44 is not set > # CONFIG_FORCEDETH is not set > # CONFIG_DGRS is not set > # CONFIG_EEPRO100 is not set > CONFIG_E100=y > # CONFIG_FEALNX is not set > # CONFIG_NATSEMI is not set > # CONFIG_NE2K_PCI is not set > # CONFIG_8139CP is not set > # CONFIG_8139TOO is not set > # CONFIG_SIS900 is not set > # CONFIG_EPIC100 is not set > # CONFIG_SUNDANCE is not set > # CONFIG_VIA_RHINE is not set > > # > # Ethernet (1000 Mbit) > # > # CONFIG_ACENIC is not set > # CONFIG_DL2K is not set > # CONFIG_E1000 is not set > # CONFIG_NS83820 is not set > # CONFIG_HAMACHI is not set > # CONFIG_YELLOWFIN is not set > # CONFIG_R8169 is not set > # CONFIG_SIS190 is not set > # CONFIG_SKGE is not set > # CONFIG_SKY2 is not set > # CONFIG_SK98LIN is not set > # CONFIG_VIA_VELOCITY is not set > CONFIG_TIGON3=y > # CONFIG_BNX2 is not set > > # > # Ethernet (10000 Mbit) > # > # CONFIG_CHELSIO_T1 is not set > # CONFIG_IXGB is not set > CONFIG_S2IO=m > # CONFIG_S2IO_NAPI is not set > > # > # Token Ring devices > # > #CONFIG_TR is not set > > # > # Wireless LAN (non-hamradio) > # > #CONFIG_NET_RADIO is not set > > # > # Wan interfaces > # > # CONFIG_WAN is not set > # CONFIG_FDDI is not set > # CONFIG_HIPPI is not set > # CONFIG_PPP is not set > # CONFIG_SLIP is not set > CONFIG_NET_FC=y > # CONFIG_SHAPER is not set > CONFIG_NETCONSOLE=y > CONFIG_NETPOLL=y > # CONFIG_NETPOLL_RX is not set > # CONFIG_NETPOLL_TRAP is not set > CONFIG_NET_POLL_CONTROLLER=y > > # > # ISDN subsystem > # > #CONFIG_ISDN is not set > > # > # Telephony Support > # > #CONFIG_PHONE is not set > > # > # Input device support > # > CONFIG_INPUT=y > > # > # Userland interfaces > # > CONFIG_INPUT_MOUSEDEV=y > CONFIG_INPUT_MOUSEDEV_PSAUX=y > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > # CONFIG_INPUT_JOYDEV is not set > # CONFIG_INPUT_TSDEV is not set > CONFIG_INPUT_EVDEV=y > # CONFIG_INPUT_EVBUG is not set > > # > # Input Device Drivers > # > CONFIG_INPUT_KEYBOARD=y > CONFIG_KEYBOARD_ATKBD=y > # CONFIG_KEYBOARD_SUNKBD is not set > # CONFIG_KEYBOARD_LKKBD is not set > # CONFIG_KEYBOARD_XTKBD is not set > # CONFIG_KEYBOARD_NEWTON is not set > CONFIG_INPUT_MOUSE=y > CONFIG_MOUSE_PS2=y > # CONFIG_MOUSE_SERIAL is not set > # CONFIG_MOUSE_VSXXXAA is not set > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TOUCHSCREEN is not set > # CONFIG_INPUT_MISC is not set > > # > # Hardware I/O ports > # > CONFIG_SERIO=y > CONFIG_SERIO_I8042=y > # CONFIG_SERIO_SERPORT is not set > # CONFIG_SERIO_CT82C710 is not set > # CONFIG_SERIO_PCIPS2 is not set > CONFIG_SERIO_LIBPS2=y > # CONFIG_SERIO_RAW is not set > # CONFIG_GAMEPORT is not set > > # > # Character devices > # > CONFIG_VT=y > CONFIG_VT_CONSOLE=y > CONFIG_HW_CONSOLE=y > # CONFIG_SERIAL_NONSTANDARD is not set > > # > # Serial drivers > # > CONFIG_SERIAL_8250=y > CONFIG_SERIAL_8250_CONSOLE=y > # CONFIG_SERIAL_8250_ACPI is not set > CONFIG_SERIAL_8250_NR_UARTS=4 > CONFIG_SERIAL_8250_RUNTIME_UARTS=4 > # CONFIG_SERIAL_8250_EXTENDED is not set > > # > # Non-8250 serial port support > # > CONFIG_SERIAL_CORE=y > CONFIG_SERIAL_CORE_CONSOLE=y > # CONFIG_SERIAL_JSM is not set > CONFIG_UNIX98_PTYS=y > CONFIG_LEGACY_PTYS=y > CONFIG_LEGACY_PTY_COUNT=256 > > # > # IPMI > # > #CONFIG_IPMI_HANDLER is not set > > # > # Watchdog Cards > # > #CONFIG_WATCHDOG is not set > CONFIG_HW_RANDOM=y > # CONFIG_NVRAM is not set > CONFIG_RTC=y > # CONFIG_DTLK is not set > # CONFIG_R3964 is not set > # CONFIG_APPLICOM is not set > > # > # Ftape, the floppy tape device driver > # > CONFIG_AGP=y > CONFIG_AGP_AMD64=y > CONFIG_AGP_INTEL=y > # CONFIG_DRM is not set > # CONFIG_MWAVE is not set > CONFIG_RAW_DRIVER=y > CONFIG_MAX_RAW_DEVS=256 > CONFIG_HPET=y > # CONFIG_HPET_RTC_IRQ is not set > CONFIG_HPET_MMAP=y > # CONFIG_HANGCHECK_TIMER is not set > > # > # TPM devices > # > # CONFIG_TCG_TPM is not set > # CONFIG_TELCLOCK is not set > > # > # I2C support > # > #CONFIG_I2C is not set > > # > # SPI support > # > # CONFIG_SPI is not set > # CONFIG_SPI_MASTER is not set > > # > # Dallas's 1-wire bus > # > #CONFIG_W1 is not set > > # > # Hardware Monitoring support > # > CONFIG_HWMON=y > # CONFIG_HWMON_VID is not set > # CONFIG_SENSORS_F71805F is not set > # CONFIG_SENSORS_HDAPS is not set > # CONFIG_HWMON_DEBUG_CHIP is not set > > # > # Misc devices > # > #CONFIG_IBM_ASM is not set > > # > # Multimedia Capabilities Port drivers > # > > # > # Multimedia devices > # > #CONFIG_VIDEO_DEV is not set > > # > # Digital Video Broadcasting Devices > # > #CONFIG_DVB is not set > > # > # Graphics support > # > #CONFIG_FB is not set > CONFIG_VIDEO_SELECT=y > > # > # Console display driver support > # > CONFIG_VGA_CONSOLE=y > CONFIG_DUMMY_CONSOLE=y > > # > # Sound > # > #CONFIG_SOUND is not set > > # > # USB support > # > CONFIG_USB_ARCH_HAS_HCD=y > CONFIG_USB_ARCH_HAS_OHCI=y > CONFIG_USB=y > # CONFIG_USB_DEBUG is not set > > # > # Miscellaneous USB options > # > CONFIG_USB_DEVICEFS=y > # CONFIG_USB_BANDWIDTH is not set > # CONFIG_USB_DYNAMIC_MINORS is not set > # CONFIG_USB_SUSPEND is not set > # CONFIG_USB_OTG is not set > > # > # USB Host Controller Drivers > # > CONFIG_USB_EHCI_HCD=y > # CONFIG_USB_EHCI_SPLIT_ISO is not set > # CONFIG_USB_EHCI_ROOT_HUB_TT is not set > # CONFIG_USB_ISP116X_HCD is not set > CONFIG_USB_OHCI_HCD=y > # CONFIG_USB_OHCI_BIG_ENDIAN is not set > CONFIG_USB_OHCI_LITTLE_ENDIAN=y > CONFIG_USB_UHCI_HCD=y > # CONFIG_USB_SL811_HCD is not set > > # > # USB Device Class drivers > # > #CONFIG_USB_ACM is not set > CONFIG_USB_PRINTER=y > > # > #NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' > # > > # > # may also be needed; see USB_STORAGE Help for more information > # > CONFIG_USB_STORAGE=y > # CONFIG_USB_STORAGE_DEBUG is not set > # CONFIG_USB_STORAGE_DATAFAB is not set > # CONFIG_USB_STORAGE_FREECOM is not set > # CONFIG_USB_STORAGE_ISD200 is not set > # CONFIG_USB_STORAGE_DPCM is not set > # CONFIG_USB_STORAGE_USBAT is not set > # CONFIG_USB_STORAGE_SDDR09 is not set > # CONFIG_USB_STORAGE_SDDR55 is not set > # CONFIG_USB_STORAGE_JUMPSHOT is not set > # CONFIG_USB_STORAGE_ALAUDA is not set > # CONFIG_USB_LIBUSUAL is not set > > # > # USB Input Devices > # > CONFIG_USB_HID=y > CONFIG_USB_HIDINPUT=y > # CONFIG_USB_HIDINPUT_POWERBOOK is not set > # CONFIG_HID_FF is not set > # CONFIG_USB_HIDDEV is not set > # CONFIG_USB_AIPTEK is not set > # CONFIG_USB_WACOM is not set > # CONFIG_USB_ACECAD is not set > # CONFIG_USB_KBTAB is not set > # CONFIG_USB_POWERMATE is not set > # CONFIG_USB_MTOUCH is not set > # CONFIG_USB_ITMTOUCH is not set > # CONFIG_USB_EGALAX is not set > # CONFIG_USB_YEALINK is not set > # CONFIG_USB_XPAD is not set > # CONFIG_USB_ATI_REMOTE is not set > # CONFIG_USB_ATI_REMOTE2 is not set > # CONFIG_USB_KEYSPAN_REMOTE is not set > # CONFIG_USB_APPLETOUCH is not set > > # > # USB Imaging devices > # > # CONFIG_USB_MDC800 is not set > # CONFIG_USB_MICROTEK is not set > > # > # USB Multimedia devices > # > #CONFIG_USB_DABUSB is not set > > # > # Video4Linux support is needed for USB Multimedia device support > # > > # > # USB Network Adapters > # > # CONFIG_USB_CATC is not set > # CONFIG_USB_KAWETH is not set > # CONFIG_USB_PEGASUS is not set > # CONFIG_USB_RTL8150 is not set > # CONFIG_USB_USBNET is not set > CONFIG_USB_MON=y > > # > # USB port drivers > # > > # > # USB Serial Converter support > # > #CONFIG_USB_SERIAL is not set > > # > # USB Miscellaneous drivers > # > # CONFIG_USB_EMI62 is not set > # CONFIG_USB_EMI26 is not set > # CONFIG_USB_AUERSWALD is not set > # CONFIG_USB_RIO500 is not set > # CONFIG_USB_LEGOTOWER is not set > # CONFIG_USB_LCD is not set > # CONFIG_USB_LED is not set > # CONFIG_USB_CYTHERM is not set > # CONFIG_USB_PHIDGETKIT is not set > # CONFIG_USB_PHIDGETSERVO is not set > # CONFIG_USB_IDMOUSE is not set > # CONFIG_USB_SISUSBVGA is not set > # CONFIG_USB_LD is not set > # CONFIG_USB_TEST is not set > > # > # USB DSL modem support > # > > # > # USB Gadget Support > # > #CONFIG_USB_GADGET is not set > > # > # MMC/SD Card support > # > #CONFIG_MMC is not set > > # > # InfiniBand support > # > #CONFIG_INFINIBAND is not set > > # > # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) > # > #CONFIG_EDAC is not set > > # > # Firmware Drivers > # > # CONFIG_EDD is not set > # CONFIG_DELL_RBU is not set > # CONFIG_DCDBAS is not set > > # > # File systems > # > CONFIG_EXT2_FS=y > CONFIG_EXT2_FS_XATTR=y > CONFIG_EXT2_FS_POSIX_ACL=y > # CONFIG_EXT2_FS_SECURITY is not set > # CONFIG_EXT2_FS_XIP is not set > CONFIG_EXT3_FS=y > CONFIG_EXT3_FS_XATTR=y > CONFIG_EXT3_FS_POSIX_ACL=y > # CONFIG_EXT3_FS_SECURITY is not set > CONFIG_JBD=y > # CONFIG_JBD_DEBUG is not set > CONFIG_FS_MBCACHE=y > CONFIG_REISERFS_FS=y > # CONFIG_REISERFS_CHECK is not set > # CONFIG_REISERFS_PROC_INFO is not set > CONFIG_REISERFS_FS_XATTR=y > CONFIG_REISERFS_FS_POSIX_ACL=y > # CONFIG_REISERFS_FS_SECURITY is not set > # CONFIG_JFS_FS is not set > CONFIG_FS_POSIX_ACL=y > CONFIG_XFS_FS=y > CONFIG_XFS_EXPORT=y > CONFIG_XFS_QUOTA=y > CONFIG_XFS_SECURITY=y > CONFIG_XFS_POSIX_ACL=y > # CONFIG_XFS_RT is not set > # CONFIG_OCFS2_FS is not set > # CONFIG_MINIX_FS is not set > # CONFIG_ROMFS_FS is not set > CONFIG_INOTIFY=y > # CONFIG_QUOTA is not set > CONFIG_QUOTACTL=y > CONFIG_DNOTIFY=y > CONFIG_AUTOFS_FS=y > # CONFIG_AUTOFS4_FS is not set > # CONFIG_FUSE_FS is not set > > # > # CD-ROM/DVD Filesystems > # > CONFIG_ISO9660_FS=y > CONFIG_JOLIET=y > # CONFIG_ZISOFS is not set > # CONFIG_UDF_FS is not set > > # > # DOS/FAT/NT Filesystems > # > CONFIG_FAT_FS=y > CONFIG_MSDOS_FS=y > CONFIG_VFAT_FS=y > CONFIG_FAT_DEFAULT_CODEPAGE=437 > CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" > CONFIG_NTFS_FS=m > # CONFIG_NTFS_DEBUG is not set > # CONFIG_NTFS_RW is not set > > # > # Pseudo filesystems > # > CONFIG_PROC_FS=y > CONFIG_PROC_KCORE=y > CONFIG_SYSFS=y > CONFIG_TMPFS=y > CONFIG_HUGETLBFS=y > CONFIG_HUGETLB_PAGE=y > CONFIG_RAMFS=y > # CONFIG_RELAYFS_FS is not set > # CONFIG_CONFIGFS_FS is not set > > # > # Miscellaneous filesystems > # > # CONFIG_ADFS_FS is not set > # CONFIG_AFFS_FS is not set > # CONFIG_HFS_FS is not set > # CONFIG_HFSPLUS_FS is not set > # CONFIG_BEFS_FS is not set > # CONFIG_BFS_FS is not set > # CONFIG_EFS_FS is not set > # CONFIG_CRAMFS is not set > # CONFIG_VXFS_FS is not set > # CONFIG_HPFS_FS is not set > # CONFIG_QNX4FS_FS is not set > # CONFIG_SYSV_FS is not set > # CONFIG_UFS_FS is not set > > # > # Network File Systems > # > CONFIG_NFS_FS=y > CONFIG_NFS_V3=y > # CONFIG_NFS_V3_ACL is not set > # CONFIG_NFS_V4 is not set > # CONFIG_NFS_DIRECTIO is not set > CONFIG_NFSD=y > CONFIG_NFSD_V3=y > # CONFIG_NFSD_V3_ACL is not set > # CONFIG_NFSD_V4 is not set > CONFIG_NFSD_TCP=y > CONFIG_ROOT_NFS=y > CONFIG_LOCKD=y > CONFIG_LOCKD_V4=y > CONFIG_EXPORTFS=y > CONFIG_NFS_COMMON=y > CONFIG_SUNRPC=y > # CONFIG_RPCSEC_GSS_KRB5 is not set > # CONFIG_RPCSEC_GSS_SPKM3 is not set > CONFIG_SMB_FS=y > # CONFIG_SMB_NLS_DEFAULT is not set > # CONFIG_CIFS is not set > # CONFIG_NCP_FS is not set > # CONFIG_CODA_FS is not set > # CONFIG_AFS_FS is not set > # CONFIG_9P_FS is not set > > # > # Partition Types > # > #CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > > # > # Native Language Support > # > CONFIG_NLS=y > CONFIG_NLS_DEFAULT="iso8859-1" > CONFIG_NLS_CODEPAGE_437=y > # CONFIG_NLS_CODEPAGE_737 is not set > # CONFIG_NLS_CODEPAGE_775 is not set > # CONFIG_NLS_CODEPAGE_850 is not set > # CONFIG_NLS_CODEPAGE_852 is not set > # CONFIG_NLS_CODEPAGE_855 is not set > # CONFIG_NLS_CODEPAGE_857 is not set > # CONFIG_NLS_CODEPAGE_860 is not set > # CONFIG_NLS_CODEPAGE_861 is not set > # CONFIG_NLS_CODEPAGE_862 is not set > # CONFIG_NLS_CODEPAGE_863 is not set > # CONFIG_NLS_CODEPAGE_864 is not set > # CONFIG_NLS_CODEPAGE_865 is not set > # CONFIG_NLS_CODEPAGE_866 is not set > # CONFIG_NLS_CODEPAGE_869 is not set > # CONFIG_NLS_CODEPAGE_936 is not set > # CONFIG_NLS_CODEPAGE_950 is not set > # CONFIG_NLS_CODEPAGE_932 is not set > # CONFIG_NLS_CODEPAGE_949 is not set > # CONFIG_NLS_CODEPAGE_874 is not set > # CONFIG_NLS_ISO8859_8 is not set > # CONFIG_NLS_CODEPAGE_1250 is not set > # CONFIG_NLS_CODEPAGE_1251 is not set > CONFIG_NLS_ASCII=y > CONFIG_NLS_ISO8859_1=y > # CONFIG_NLS_ISO8859_2 is not set > # CONFIG_NLS_ISO8859_3 is not set > # CONFIG_NLS_ISO8859_4 is not set > # CONFIG_NLS_ISO8859_5 is not set > # CONFIG_NLS_ISO8859_6 is not set > # CONFIG_NLS_ISO8859_7 is not set > # CONFIG_NLS_ISO8859_9 is not set > # CONFIG_NLS_ISO8859_13 is not set > # CONFIG_NLS_ISO8859_14 is not set > CONFIG_NLS_ISO8859_15=y > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > CONFIG_NLS_UTF8=y > > # > # Instrumentation Support > # > # CONFIG_PROFILING is not set > # CONFIG_KPROBES is not set > > # > # Kernel hacking > # > #CONFIG_PRINTK_TIME is not set > CONFIG_MAGIC_SYSRQ=y > # CONFIG_DEBUG_KERNEL is not set > CONFIG_LOG_BUF_SHIFT=15 > > # > # Security options > # > # CONFIG_KEYS is not set > # CONFIG_SECURITY is not set > > # > # Cryptographic options > # > #CONFIG_CRYPTO is not set > > # > # Hardware crypto devices > # > > # > # Library routines > # > # CONFIG_CRC_CCITT is not set > # CONFIG_CRC16 is not set > CONFIG_CRC32=y > # CONFIG_LIBCRC32C is not set > > lspci -vvv: > 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) > Subsystem: Tyan Computer Unknown device 2892 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Capabilities: [44] HyperTransport: Slave or Primary Interface > Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL- > Link Control 0: CFlE+ CST- CFE- TXO- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- > LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- > Link Control 1: CFlE- CST- CFE- TXO+ Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- > LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- > Revision ID: 1.03 > Link Frequency 0: 800MHz > Link Error 0: Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ > 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- > Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- > Link Frequency 1: 200MHz > Link Error 1: Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- > 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- > Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- > CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- > Prefetchable memory behind bridge Upper: 00-00 > Bus Number: 00 > Capabilities: [e0] HyperTransport: MSI Mapping > > 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) > Subsystem: Tyan Computer Unknown device 2892 > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Region 0: I/O ports at 8c00 [size=128] > > 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) > Subsystem: Tyan Computer Unknown device 2892 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Interrupt: pin A routed to IRQ 0 > Region 0: I/O ports at 1000 [size=32] > Region 4: I/O ports at 5000 [size=64] > Region 5: I/O ports at 5040 [size=64] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev > a2) (prog-if 10 [OHCI]) > Subsystem: Tyan Computer Unknown device 2892 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 (750ns min, 250ns max) > Interrupt: pin A routed to IRQ 50 > Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev > a3) (prog-if 20 [EHCI]) > Subsystem: Tyan Computer Unknown device 2892 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 (750ns min, 250ns max) > Interrupt: pin B routed to IRQ 233 > Region 0: Memory at dd001000 (32-bit, non-prefetchable) [size=256] > Capabilities: [44] Debug port > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2) (prog-if > 8a [Master SecP PriP]) > Subsystem: Tyan Computer Unknown device 2892 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 (750ns min, 250ns max) > Region 4: I/O ports at 1400 [size=16] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller > (rev a3) (prog-if 85 [Master SecO PriO]) > Subsystem: Tyan Computer Unknown device 2892 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 (750ns min, 250ns max) > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at 1440 [size=8] > Region 1: I/O ports at 1434 [size=4] > Region 2: I/O ports at 1438 [size=8] > Region 3: I/O ports at 1430 [size=4] > Region 4: I/O ports at 1410 [size=16] > Region 5: Memory at dd002000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller > (rev a3) (prog-if 85 [Master SecO PriO]) > Subsystem: Tyan Computer Unknown device 2892 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 (750ns min, 250ns max) > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at 1458 [size=8] > Region 1: I/O ports at 144c [size=4] > Region 2: I/O ports at 1450 [size=8] > Region 3: I/O ports at 1448 [size=4] > Region 4: I/O ports at 1420 [size=16] > Region 5: Memory at dd003000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) > (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > I/O behind bridge: 00002000-00002fff > Memory behind bridge: dd100000-deffffff > Prefetchable memory behind bridge: 88000000-880fffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium > >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- > > 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) > (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0, Cache Line Size 10 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [48] Message Signalled Interrupts: 64bit+ > Queue=0/1 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [58] HyperTransport: MSI Mapping > Capabilities: [80] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- > Device: Latency L0s <512ns, L1 <4us > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 512 bytes > Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 1 > Link: Latency L0s <512ns, L1 <4us > Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- > Link: Speed 2.5Gb/s, Width x4 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- > Slot: Number 2, PowerLimit 25.000000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > Slot: AttnInd Off, PwrInd On, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > > 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) > (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0, Cache Line Size 10 > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [48] Message Signalled Interrupts: 64bit+ > Queue=0/1 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [58] HyperTransport: MSI Mapping > Capabilities: [80] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- > Device: Latency L0s <512ns, L1 <4us > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 512 bytes > Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 0 > Link: Latency L0s <512ns, L1 <4us > Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- > Link: Speed 2.5Gb/s, Width x16 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- > Slot: Number 1, PowerLimit 75.000000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > Slot: AttnInd Off, PwrInd On, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > > 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] HyperTransport Technology Configuration > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- Capabilities: [80] HyperTransport: Host or Secondary Interface > !!! Possibly incomplete decoding > Command: WarmRst+ DblEnd- > Link Control: CFlE- CST- CFE- Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit > Revision ID: 1.02 > Capabilities: [a0] HyperTransport: Host or Secondary Interface > !!! Possibly incomplete decoding > Command: WarmRst+ DblEnd- > Link Control: CFlE- CST- CFE- Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit > Revision ID: 1.02 > Capabilities: [c0] HyperTransport: Host or Secondary Interface > !!! Possibly incomplete decoding > Command: WarmRst+ DblEnd- > Link Control: CFlE- CST- CFE- Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit > Revision ID: 1.02 > > 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] Address Map > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- > 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] DRAM Controller > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- > 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] Miscellaneous Control > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- > 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] HyperTransport Technology Configuration > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- Capabilities: [80] HyperTransport: Host or Secondary Interface > !!! Possibly incomplete decoding > Command: WarmRst+ DblEnd- > Link Control: CFlE- CST- CFE- Link Config: MLWI=16bit MLWO=16bit LWI=N/C LWO=N/C > Revision ID: 1.02 > Capabilities: [a0] HyperTransport: Host or Secondary Interface > !!! Possibly incomplete decoding > Command: WarmRst+ DblEnd- > Link Control: CFlE- CST- CFE- Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit > Revision ID: 1.02 > Capabilities: [c0] HyperTransport: Host or Secondary Interface > !!! Possibly incomplete decoding > Command: WarmRst+ DblEnd- > Link Control: CFlE- CST- CFE- Link Config: MLWI=16bit MLWO=16bit LWI=N/C LWO=N/C > Revision ID: 1.02 > > 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] Address Map > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- > 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] DRAM Controller > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- > 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] Miscellaneous Control > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- > 01:06.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev > 27) (prog-if 00 [VGA]) > Subsystem: ATI Technologies Inc Rage XL > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping+ SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 66 (2000ns min), Cache Line Size 10 > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M] > Region 1: I/O ports at 2000 [size=256] > Region 2: Memory at dd100000 (32-bit, non-prefetchable) [size=4K] > [virtual] Expansion ROM at 88000000 [disabled] [size=128K] > Capabilities: [5c] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 01:08.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro > 100] (rev 10) > Subsystem: Intel Corporation EtherExpress PRO/100 S Server Adapter > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 66 (2000ns min, 14000ns max), Cache Line Size 10 > Interrupt: pin A routed to IRQ 177 > Region 0: Memory at dd101000 (32-bit, non-prefetchable) [size=4K] > Region 1: I/O ports at 2400 [size=64] > Region 2: Memory at dd120000 (32-bit, non-prefetchable) [size=128K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > 08:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge > (rev 12) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 64 > Bus: primary=08, secondary=09, subordinate=09, sec-latency=96 > I/O behind bridge: 00003000-00003fff > Memory behind bridge: df300000-df3fffff > Prefetchable memory behind bridge: 00000000df800000-00000000dff00000 > Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium > >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [a0] PCI-X bridge device > Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv > Status: Dev=08:0a.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- > Upstream: Capacity=14 CommitmentLimit=65535 > Downstream: Capacity=2 CommitmentLimit=65535 > Capabilities: [b8] HyperTransport: Interrupt Discovery and > Capabilities: Configuration > Capabilities: [c0] HyperTransport: Slave or Primary Interface > !!! Possibly incomplete decoding > Command: BaseUnitID=10 UnitCnt=2 MastHost- DefDir- > Link Control 0: CFlE- CST- CFE- TXO- Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit > Link Control 1: CFlE- CST- CFE- TXO+ Link Config 1: MLWI=8bit MLWO=8bit LWI=N/C LWO=N/C > Revision ID: 1.02 > > 08:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev > 01) (prog-if 10 [IO-APIC]) > Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 0 > Region 0: Memory at df200000 (64-bit, non-prefetchable) [size=4K] > > 08:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge > (rev 12) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 64 > Bus: primary=08, secondary=0a, subordinate=0a, sec-latency=96 > I/O behind bridge: 00004000-00004fff > Memory behind bridge: df400000-df4fffff > Prefetchable memory behind bridge: 0000000088100000-0000000088100000 > Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium > >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [a0] PCI-X bridge device > Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv > Status: Dev=08:0b.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- > Upstream: Capacity=14 CommitmentLimit=65535 > Downstream: Capacity=2 CommitmentLimit=65535 > Capabilities: [b8] HyperTransport: Interrupt Discovery and > Configuration > > 08:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev > 01) (prog-if 10 [IO-APIC]) > Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 0 > Region 0: Memory at df201000 (64-bit, non-prefetchable) [size=4K] > > 09:02.0 Fibre Channel: LSI Logic / Symbios Logic FC929X Fibre Channel > Adapter (rev 81) > Subsystem: LSI Logic / Symbios Logic Unknown device 10d0 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 72 (16000ns min, 2500ns max), Cache Line Size 10 > Interrupt: pin A routed to IRQ 225 > Region 0: I/O ports at 3000 [size=256] > Region 1: Memory at df310000 (64-bit, non-prefetchable) [size=64K] > Region 3: Memory at df300000 (64-bit, non-prefetchable) [size=64K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Message Signalled Interrupts: 64bit+ > Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [68] PCI-X non-bridge device > Command: DPERE- ERO- RBC=2048 OST=8 > Status: Dev=ff:1f.0 64bit+ 133MHz+ SCD- USC- DC=simple > DMMRBC=2048 DMOST=8 DMCRS=64 RSCEM- 266MHz- 533MHz- > > 09:02.1 Fibre Channel: LSI Logic / Symbios Logic FC929X Fibre Channel > Adapter (rev 81) > Subsystem: LSI Logic / Symbios Logic Unknown device 10d0 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 72 (16000ns min, 2500ns max), Cache Line Size 10 > Interrupt: pin B routed to IRQ 217 > Region 0: I/O ports at 3400 [size=256] > Region 1: Memory at df330000 (64-bit, non-prefetchable) [size=64K] > Region 3: Memory at df320000 (64-bit, non-prefetchable) [size=64K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Message Signalled Interrupts: 64bit+ > Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [68] PCI-X non-bridge device > Command: DPERE- ERO- RBC=2048 OST=8 > Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple > DMMRBC=2048 DMOST=8 DMCRS=64 RSCEM- 266MHz- 533MHz- > > 09:03.0 RAID bus controller: 3ware Inc 9xxx-series SATA-RAID > Subsystem: 3ware Inc 9xxx-series SATA-RAID > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 72 (2250ns min), Cache Line Size 10 > Interrupt: pin A routed to IRQ 217 > Region 0: I/O ports at 3800 [size=256] > Region 1: Memory at df340000 (64-bit, non-prefetchable) [size=256] > Region 3: Memory at df800000 (64-bit, prefetchable) [size=8M] > [virtual] Expansion ROM at df350000 [disabled] [size=64K] > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA > PME(D0+,D1+,D2-,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 0a:03.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01) > Subsystem: Adaptec AHA-3960D U160/m > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 72 (10000ns min, 6250ns max), Cache Line Size 10 > Interrupt: pin A routed to IRQ 201 > BIST result: 00 > Region 0: I/O ports at 4000 [disabled] [size=256] > Region 1: Memory at df400000 (64-bit, non-prefetchable) [size=4K] > [virtual] Expansion ROM at 88100000 [disabled] [size=128K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 0a:03.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01) > Subsystem: Adaptec AHA-3960D U160/m > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 72 (10000ns min, 6250ns max), Cache Line Size 10 > Interrupt: pin B routed to IRQ 209 > BIST result: 00 > Region 0: I/O ports at 4400 [disabled] [size=256] > Region 1: Memory at df401000 (64-bit, non-prefetchable) [size=4K] > [virtual] Expansion ROM at 88120000 [disabled] [size=128K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 0a:09.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 > Gigabit Ethernet (rev 03) > Subsystem: Broadcom Corporation Unknown device 1644 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 64 (16000ns min), Cache Line Size 10 > Interrupt: pin A routed to IRQ 185 > Region 0: Memory at df420000 (64-bit, non-prefetchable) [size=64K] > Region 2: Memory at df410000 (64-bit, non-prefetchable) [size=64K] > [virtual] Expansion ROM at 88140000 [disabled] [size=64K] > Capabilities: [40] PCI-X non-bridge device > Command: DPERE- ERO- RBC=512 OST=1 > Status: Dev=ff:1f.0 64bit+ 133MHz+ SCD- USC- DC=simple > DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable+ DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data > Capabilities: [58] Message Signalled Interrupts: 64bit+ > Queue=0/3 Enable- > Address: 1a72e12521540314 Data: 0128 > > 0a:09.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 > Gigabit Ethernet (rev 03) > Subsystem: Broadcom Corporation Unknown device 1644 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- SERR- Latency: 64 (16000ns min), Cache Line Size 10 > Interrupt: pin B routed to IRQ 193 > Region 0: Memory at df440000 (64-bit, non-prefetchable) [size=64K] > Region 2: Memory at df430000 (64-bit, non-prefetchable) [size=64K] > [virtual] Expansion ROM at 88150000 [disabled] [size=64K] > Capabilities: [40] PCI-X non-bridge device > Command: DPERE- ERO+ RBC=2048 OST=1 > Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple > DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data > Capabilities: [58] Message Signalled Interrupts: 64bit+ > Queue=0/3 Enable- > Address: 2000274248c02928 Data: 0006 > > /proc/cpuinfo: > > processor : 0 > vendor_id : AuthenticAMD > cpu family : 15 > model : 5 > model name : AMD Opteron(tm) Processor 246 > stepping : 10 > cpu MHz : 2000.000 > cache size : 1024 KB > fpu : yes > fpu_exception : yes > cpuid level : 1 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge > mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm > 3dnowext 3dnow > bogomips : 4025.03 > TLB size : 1024 4K pages > clflush size : 64 > cache_alignment : 64 > address sizes : 40 bits physical, 48 bits virtual > power management: ts fid vid ttp > > processor : 1 > vendor_id : AuthenticAMD > cpu family : 15 > model : 5 > model name : AMD Opteron(tm) Processor 246 > stepping : 10 > cpu MHz : 2000.000 > cache size : 1024 KB > fpu : yes > fpu_exception : yes > cpuid level : 1 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge > mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm > 3dnowext 3dnow > bogomips : 4018.81 > TLB size : 1024 4K pages > clflush size : 64 > cache_alignment : 64 > address sizes : 40 bits physical, 48 bits virtual > power management: ts fid vid ttp > - -- Kai - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/