Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20200901075417.22481-1-krzk@kernel.org> <CGME20200901075518eucas1p252ef2b85cf5e1a83d88f8de2dd4a8196@eucas1p2.samsung.com>
 <20200901075417.22481-12-krzk@kernel.org> <800d8fa8-7fd4-6221-f8be-ef422e5642d9@samsung.com>
In-Reply-To: <800d8fa8-7fd4-6221-f8be-ef422e5642d9@samsung.com>
From:   Krzysztof Kozlowski <krzk@kernel.org>
Date:   Tue, 1 Sep 2020 10:17:30 +0200
Message-ID: <CAJKOXPd+Mr0c7ype1KTseBc2=qx0NNKKj5Ku0w0HBOgjEsGvKg@mail.gmail.com>
Subject: Re: [PATCH 11/13] ARM: dts: exynos: Silence SATA PHY warning in
 Exynos5250 Arndale
To:     Marek Szyprowski <m.szyprowski@samsung.com>
Cc:     Rob Herring <robh+dt@kernel.org>, Kukjin Kim <kgene@kernel.org>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        "linux-samsung-soc@vger.kernel.org" 
        <linux-samsung-soc@vger.kernel.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
        Sylwester Nawrocki <snawrocki@kernel.org>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Tue, 1 Sep 2020 at 10:13, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
>
> Hi Krzysztof,
>
> On 01.09.2020 09:54, Krzysztof Kozlowski wrote:
> > The SATA PHY in Exynos5250 SoCs has two interfaces and two device nodes:
> > 1. sata-phy@12170000
> > 2. i2c-9/i2c@38
> >
> > The first node represents the actual SATA PHY device with phy-cells.
> > The second represents additional I2C interface, needed by the driver
> > to communicate with the SATA PHY device.  It is not a PHY-provider in
> > the terms of dtschema so rename it to silence dtbs_check warning:
> >
> >    arch/arm/boot/dts/exynos5250-arndale.dt.yaml: sata-phy@38: '#phy-cells' is a required property
> >      From schema: lib/python3.6/site-packages/dtschema/schemas/phy/phy-provider.yaml
> >
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > ---
> >   arch/arm/boot/dts/exynos5250-arndale.dts | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
> > index f2bcce167b2d..3c401c82905c 100644
> > --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> > +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> > @@ -544,7 +544,7 @@
> >       samsung,i2c-max-bus-freq = <40000>;
> >       samsung,i2c-slave-addr = <0x38>;
> >
> > -     sata_phy_i2c: sata-phy@38 {
> > +     sata_phy_i2c: sata-phy-i2c@38 {
> >               compatible = "samsung,exynos-sataphy-i2c";
> >               reg = <0x38>;
> >       };
>
> I'm not against the rename, but frankly, the above node and all i2c
> parameters should be moved to exynos5250.dtsi. This is a SoC internal
> things (the same way as hdmiphy in exynos4.dtsi), so the board dts
> should only contain information like status = "enabled" for i2c_8 and
> hdmi_i2c_phy nodes. No need to duplicate it here and in smdk5250.dts.

Good point, the I2C bus used here is an internal part of SoC.

I will squash these two changes into a new one. Thanks for the review!

Best regards,
Krzysztof