Received: by 2002:a05:6a10:22f:0:0:0:0 with SMTP id 15csp38757pxk; Tue, 1 Sep 2020 15:33:49 -0700 (PDT) X-Google-Smtp-Source: ABdhPJyK8ofVtuHMCNdRwVj7b9FuTNBIYWc1UbS9X3hD7jIA5c3YzNQMRGKmOOQG0HDe2MTM/ZbM X-Received: by 2002:a17:906:394d:: with SMTP id g13mr3546147eje.524.1598999629682; Tue, 01 Sep 2020 15:33:49 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1598999629; cv=none; d=google.com; s=arc-20160816; b=jIEPyJbGSPyR4snRIvfSDGN3ieK05nQjpvxr5TTnbvFroAgZA/qb9BJU9OZ0smzrBZ LIj1mG/Uy+E5EvG4AbZu3wQ+aflF6Lv2BICzJ5ieuXVPI/7clI1i2TaAa1mBHjBpDMVD 35dzL7JhhikJxHsw2o7tUbeUYquu1UZ5ELJh4aYoiOYed78e47+oIK459YJFSjt8fOii ZbgSzSTREqmFWGf9kPSLoc/LOSqW6wUoWnhqVQKqhQoUPYGzZY05KNdPr4kZGQSbnnKR Q7iBn15dcLHIBiOdgVQyefqYgXqCoUMqplqqIj5IxYkuAnGioguUWgS53oJ0r9+8ngSw OiNQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:dkim-signature; bh=Yd3vtqhEXUYBJs790wvZthLwGwrz+f/3CptyNXimaQA=; b=WlnziqGNaA3lkvgGculTDjDI7eR1xfiBQDkT486q0zzwB2zTQNJ1dAfOROVsx//vue mijl1zf99U5fO8STV7fI1HjF1fhcYZLSIm8fknREFE59j+hX4UyW27ByAava0EvRdA1j ZRO/TdCMC908IgSkhv0NKqgbSEnIE3PXmCcNyTe9XN8Wv1HuqSv9kcBW9DFm1TngnGz+ VEibpXzEDhODATEG8hwMcghP9DvM7YW73HvnMP55D0PCKqeW47z/8rS85eGMt2HwXDsO s7cmtgcrmuPeKfUfOrMcwK5nRCi2GWfkRrjwaAzeXiq3+UC2sv+/9hG2O2fGtc0/lrrv DZ1Q== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=PFNW8z3T; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id l26si1477075eje.138.2020.09.01.15.33.26; Tue, 01 Sep 2020 15:33:49 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=PFNW8z3T; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728583AbgIAWbj (ORCPT + 99 others); Tue, 1 Sep 2020 18:31:39 -0400 Received: from lelv0143.ext.ti.com ([198.47.23.248]:47148 "EHLO lelv0143.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728236AbgIAWbR (ORCPT ); Tue, 1 Sep 2020 18:31:17 -0400 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by lelv0143.ext.ti.com (8.15.2/8.15.2) with ESMTP id 081MV7Ci011960; Tue, 1 Sep 2020 17:31:07 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1598999467; bh=Yd3vtqhEXUYBJs790wvZthLwGwrz+f/3CptyNXimaQA=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=PFNW8z3Twn1dXApk/wUnCLzdW/F2YrsJR/I9kGGhU6nhNsWMIf1IS89Z3C8tb5hGX cZgwiSsdTdjGtZn8Q1gNCEfkqzwtmXMwB/fM5NblkhYR6ASj7QzJaZpQXvlAvEljBQ 0e4wGT1mstY8aBFfclcSCOOoXhG/z4HbKGC5Hrns= Received: from DFLE100.ent.ti.com (dfle100.ent.ti.com [10.64.6.21]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 081MV6Uf053956 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Tue, 1 Sep 2020 17:31:07 -0500 Received: from DFLE102.ent.ti.com (10.64.6.23) by DFLE100.ent.ti.com (10.64.6.21) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Tue, 1 Sep 2020 17:31:06 -0500 Received: from fllv0039.itg.ti.com (10.64.41.19) by DFLE102.ent.ti.com (10.64.6.23) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Tue, 1 Sep 2020 17:31:06 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0039.itg.ti.com (8.15.2/8.15.2) with ESMTP id 081MV6sb025399; Tue, 1 Sep 2020 17:31:06 -0500 From: Nishanth Menon To: Rob Herring , Tero Kristo CC: , , , Suman Anna , Vignesh Raghavendra , , , , Nishanth Menon Subject: [PATCH 7/7] arm64: dts: ti: k3-*: Fix up node_name_chars_strict errors Date: Tue, 1 Sep 2020 17:30:59 -0500 Message-ID: <20200901223059.14801-8-nm@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200901223059.14801-1-nm@ti.com> References: <20200901223059.14801-1-nm@ti.com> MIME-Version: 1.0 Content-Type: text/plain X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Building with W=2 throws up a bunch of easy to fixup errors.. node_name_chars_strict is one of them.. Knock those out. Signed-off-by: Nishanth Menon --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 6 +++--- arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 4 ++-- arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 16 ++++++++-------- .../dts/ti/k3-am654-industrial-thermal.dtsi | 12 ++++++------ .../boot/dts/ti/k3-j721e-common-proc-board.dts | 18 +++++++++--------- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 6 +++--- .../arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 2 +- 8 files changed, 33 insertions(+), 33 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 9c96e3f58c86..ff3e38408dbc 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -305,7 +305,7 @@ no-1-8-v; }; - scm_conf: scm_conf@100000 { + scm_conf: scm-conf@100000 { compatible = "syscon", "simple-mfd"; reg = <0 0x00100000 0 0x1c000>; #address-cells = <1>; @@ -344,7 +344,7 @@ <0x4090 0x3>; /* SERDES1 lane select */ }; - dss_oldi_io_ctrl: dss_oldi_io_ctrl@41E0 { + dss_oldi_io_ctrl: dss-oldi-io-ctrl@41E0 { compatible = "syscon"; reg = <0x0000041E0 0x14>; }; @@ -445,7 +445,7 @@ ti,interrupt-ranges = <0 392 32>; }; - main_navss { + main-navss { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index 6dfec68ac865..435e51019287 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -6,7 +6,7 @@ */ &cbass_mcu { - mcu_conf: scm_conf@40f00000 { + mcu_conf: scm-conf@40f00000 { compatible = "syscon", "simple-mfd"; reg = <0x0 0x40f00000 0x0 0x20000>; #address-cells = <1>; @@ -116,7 +116,7 @@ }; }; - mcu_navss { + mcu-navss { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 86c9074cb070..d12dd89f3405 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -29,7 +29,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; - secure_ddr: secure_ddr@9e800000 { + secure_ddr: secure-ddr@9e800000 { reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */ alignment = <0x1000>; no-map; @@ -70,14 +70,14 @@ >; }; - push_button_pins_default: push_button__pins_default { + push_button_pins_default: push-button-pins-default { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */ AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */ >; }; - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */ AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */ @@ -93,13 +93,13 @@ >; }; - wkup_pca554_default: wkup_pca554_default { + wkup_pca554_default: wkup-pca554-default { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ >; }; - mcu_cpsw_pins_default: mcu_cpsw_pins_default { + mcu_cpsw_pins_default: mcu-cpsw-pins-default { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */ AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */ @@ -116,7 +116,7 @@ >; }; - mcu_mdio_pins_default: mcu_mdio1_pins_default { + mcu_mdio_pins_default: mcu-mdio1-pins-default { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ @@ -167,7 +167,7 @@ >; }; - main_mmc1_pins_default: main_mmc1_pins_default { + main_mmc1_pins_default: main-mmc1-pins-default { pinctrl-single,pins = < AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ @@ -180,7 +180,7 @@ >; }; - usb1_pins_default: usb1_pins_default { + usb1_pins_default: usb1-pins-default { pinctrl-single,pins = < AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ >; diff --git a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi index cdc3d40c3f60..9021c738056b 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi @@ -2,13 +2,13 @@ #include -mpu0_thermal: mpu0_thermal { +mpu0_thermal: mpu0-thermal { polling-delay-passive = <250>; /* milliseconds */ polling-delay = <500>; /* milliseconds */ thermal-sensors = <&wkup_vtm0 0>; trips { - mpu0_crit: mpu0_crit { + mpu0_crit: mpu0-crit { temperature = <125000>; /* milliCelsius */ hysteresis = <2000>; /* milliCelsius */ type = "critical"; @@ -16,13 +16,13 @@ mpu0_thermal: mpu0_thermal { }; }; -mpu1_thermal: mpu1_thermal { +mpu1_thermal: mpu1-thermal { polling-delay-passive = <250>; /* milliseconds */ polling-delay = <500>; /* milliseconds */ thermal-sensors = <&wkup_vtm0 1>; trips { - mpu1_crit: mpu1_crit { + mpu1_crit: mpu1-crit { temperature = <125000>; /* milliCelsius */ hysteresis = <2000>; /* milliCelsius */ type = "critical"; @@ -30,13 +30,13 @@ mpu1_thermal: mpu1_thermal { }; }; -mcu_thermal: mcu_thermal { +mcu_thermal: mcu-thermal { polling-delay-passive = <250>; /* milliseconds */ polling-delay = <500>; /* milliseconds */ thermal-sensors = <&wkup_vtm0 2>; trips { - mcu_crit: mcu_crit { + mcu_crit: mcu-crit { temperature = <125000>; /* milliCelsius */ hysteresis = <2000>; /* milliCelsius */ type = "critical"; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index c355692796a9..648267284582 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -86,13 +86,13 @@ }; &main_pmx0 { - sw10_button_pins_default: sw10_button_pins_default { + sw10_button_pins_default: sw10-button-pins-default { pinctrl-single,pins = < J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */ >; }; - main_mmc1_pins_default: main_mmc1_pins_default { + main_mmc1_pins_default: main-mmc1-pins-default { pinctrl-single,pins = < J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ @@ -106,14 +106,14 @@ >; }; - main_usbss0_pins_default: main_usbss0_pins_default { + main_usbss0_pins_default: main-usbss0-pins-default { pinctrl-single,pins = < J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ >; }; - main_usbss1_pins_default: main_usbss1_pins_default { + main_usbss1_pins_default: main-usbss1-pins-default { pinctrl-single,pins = < J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ >; @@ -153,7 +153,7 @@ >; }; - mcasp10_pins_default: mcasp10_pins_default { + mcasp10_pins_default: mcasp10-pins-default { pinctrl-single,pins = < J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */ J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */ @@ -167,7 +167,7 @@ >; }; - audi_ext_refclk2_pins_default: audi_ext_refclk2_pins_default { + audi_ext_refclk2_pins_default: audi-ext-refclk2-pins-default { pinctrl-single,pins = < J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */ >; @@ -175,7 +175,7 @@ }; &wkup_pmx0 { - sw11_button_pins_default: sw11_button_pins_default { + sw11_button_pins_default: sw11-button-pins-default { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */ >; @@ -194,7 +194,7 @@ >; }; - mcu_cpsw_pins_default: mcu_cpsw_pins_default { + mcu_cpsw_pins_default: mcu-cpsw-pins-default { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */ J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */ @@ -211,7 +211,7 @@ >; }; - mcu_mdio_pins_default: mcu_mdio1_pins_default { + mcu_mdio_pins_default: mcu-mdio1-pins-default { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* MCU_MDIO0_MDC */ J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */ diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 1d2a7c05b6f3..ea57d07777ba 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -86,7 +86,7 @@ ti,interrupt-ranges = <8 392 56>; }; - main_navss { + main-navss { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; @@ -888,7 +888,7 @@ no-1-8-v; }; - usbss0: cdns_usb@4104000 { + usbss0: cdns-usb@4104000 { compatible = "ti,j721e-usb"; reg = <0x00 0x4104000 0x00 0x100>; dma-coherent; @@ -918,7 +918,7 @@ }; }; - usbss1: cdns_usb@4114000 { + usbss1: cdns-usb@4114000 { compatible = "ti,j721e-usb"; reg = <0x00 0x4114000 0x00 0x100>; dma-coherent; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 81801f519a61..03fa69c0a038 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -249,7 +249,7 @@ }; }; - mcu_navss { + mcu-navss { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi index d69d90c8b5e3..5dc3ba739131 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -71,7 +71,7 @@ }; &wkup_pmx0 { - wkup_i2c0_pins_default: wkup_i2c0_pins_default { + wkup_i2c0_pins_default: wkup-i2c0-pins-default { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ -- 2.17.1