Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20200825162718.5838-1-prabhakar.mahadev-lad.rj@bp.renesas.com> <20200825162718.5838-5-prabhakar.mahadev-lad.rj@bp.renesas.com>
In-Reply-To: <20200825162718.5838-5-prabhakar.mahadev-lad.rj@bp.renesas.com>
From:   Geert Uytterhoeven <geert@linux-m68k.org>
Date:   Thu, 3 Sep 2020 14:20:11 +0200
Message-ID: <CAMuHMdXkGBfwNOwd5-=U3wg6U0O+3BErbXuybbuytgzsCmZqRQ@mail.gmail.com>
Subject: Re: [PATCH 4/4] ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indication
To:     Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc:     Magnus Damm <magnus.damm@gmail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Linux-Renesas <linux-renesas-soc@vger.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        Prabhakar <prabhakar.csengg@gmail.com>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Prabhakar,

On Tue, Aug 25, 2020 at 6:28 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> Add support for LED trigger on SD2 interface.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>

> --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
> +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
> @@ -63,6 +63,16 @@
>                 enable-gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
>         };
>
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               sdhi2_led {
> +                       label = "sdio-led";
> +                       gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;

GPIO_ACTIVE_HIGH?

The LED is driven by an NPN transistor, with the LED between 3.3V and
the transistor's collector.

> +                       linux,default-trigger = "mmc1";
> +               };
> +       };
> +
>         lvds-receiver {
>                 compatible = "ti,ds90cf384a", "lvds-decoder";
>                 vcc-supply = <&vcc_3v3_tft1>;

With the above fixed:
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds