Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: sig/PtixE42DZ+VMd8xVLG7fD07MXzJwlWexLPbtcG9WP/StKOn7JXJH8MLdNfxHMlYeg8OhsY
 BEfi9qmi5RaAtqA6dC6h/59MXezeWlnrpN8t1pgONvkrXfb/WVc/VzvL/0JDN3Jsn5JXtWapre
 HcAzdVN0emyUVlVpA82KDK8Q+asXjRxEP5U2oFtRQ/9EpHnWPfbXx7DKpJEREAsb+ttFeKuAeJ
 hmLDQij9aPchAq/v0VFU+2h0GzRLWhn548SBVybXRKEJw+Z1FIM4wti6uOL3oLH/+d5ljyfeqx
 DUY=
From:   Lars Povlsen <lars.povlsen@microchip.com>
To:     Linus Walleij <linus.walleij@linaro.org>
CC:     Lars Povlsen <lars.povlsen@microchip.com>,
        Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>,
        <devicetree@vger.kernel.org>, <linux-gpio@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>,
        Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH v2 3/3] arm64: dts: sparx5: Add SGPIO devices
Date:   Thu, 3 Sep 2020 15:35:28 +0200
Message-ID: <20200903133528.8595-4-lars.povlsen@microchip.com>
In-Reply-To: <20200903133528.8595-1-lars.povlsen@microchip.com>
References: <20200903133528.8595-1-lars.povlsen@microchip.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This adds SGPIO devices for the Sparx5 SoC and configures it for the
applicable reference boards.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
 arch/arm64/boot/dts/microchip/sparx5.dtsi     | 52 +++++++++++++++++++
 .../boot/dts/microchip/sparx5_pcb125.dts      |  5 ++
 .../dts/microchip/sparx5_pcb134_board.dtsi    |  5 ++
 .../dts/microchip/sparx5_pcb135_board.dtsi    |  5 ++
 4 files changed, 67 insertions(+)

diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
index 5408486b4d3b..3cbf8824a545 100644
--- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -232,6 +232,22 @@ si2_pins: si2-pins {
 				function = "si2";
 			};
 
+			sgpio0_pins: sgpio-pins {
+				pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3";
+				function = "sg0";
+			};
+
+			sgpio1_pins: sgpio1-pins {
+				pins = "GPIO_4", "GPIO_5", "GPIO_12", "GPIO_13";
+				function = "sg1";
+			};
+
+			sgpio2_pins: sgpio2-pins {
+				pins = "GPIO_30", "GPIO_31", "GPIO_32",
+				       "GPIO_33";
+				function = "sg2";
+			};
+
 			uart_pins: uart-pins {
 				pins = "GPIO_10", "GPIO_11";
 				function = "uart";
@@ -262,6 +278,42 @@ emmc_pins: emmc-pins {
 			};
 		};
 
+		sgpio0: gpio@61101036c {
+			compatible = "microchip,sparx5-sgpio";
+			status = "disabled";
+			clocks = <&sys_clk>;
+			pinctrl-0 = <&sgpio0_pins>;
+			pinctrl-names = "default";
+			reg = <0x6 0x1101036c 0x100>;
+			gpio-controller;
+			gpio-ranges = <&sgpio0 0 0 192>;
+			#gpio-cells = <4>;
+		};
+
+		sgpio1: gpio@611010484 {
+			compatible = "microchip,sparx5-sgpio";
+			status = "disabled";
+			clocks = <&sys_clk>;
+			pinctrl-0 = <&sgpio1_pins>;
+			pinctrl-names = "default";
+			reg = <0x6 0x11010484 0x100>;
+			gpio-controller;
+			gpio-ranges = <&sgpio1 0 0 192>;
+			#gpio-cells = <4>;
+		};
+
+		sgpio2: gpio@61101059c {
+			compatible = "microchip,sparx5-sgpio";
+			status = "disabled";
+			clocks = <&sys_clk>;
+			pinctrl-0 = <&sgpio2_pins>;
+			pinctrl-names = "default";
+			reg = <0x6 0x1101059c 0x100>;
+			gpio-controller;
+			gpio-ranges = <&sgpio2 0 0 192>;
+			#gpio-cells = <4>;
+		};
+
 		i2c0: i2c@600101000 {
 			compatible = "snps,designware-i2c";
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
index 6b2da7c7520c..9baa085d7861 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
@@ -69,6 +69,11 @@ spi-flash@9 {
 	};
 };
 
+&sgpio0 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <0 23>;
+};
+
 &i2c1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
index 35984785d611..65336be31fd9 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -54,6 +54,11 @@ spi-flash@9 {
 	};
 };
 
+&sgpio2 {
+	status = "okay";
+        microchip,sgpio-port-ranges = <0 0 11 31>;
+};
+
 &gpio {
 	i2cmux_pins_i: i2cmux-pins-i {
 	       pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19",
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
index 7de66806b14b..5ea2d0910c2b 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
@@ -67,6 +67,11 @@ spi-flash@9 {
 	};
 };
 
+&sgpio2 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <0 0 16 18 28 31>;
+};
+
 &axi {
 	i2c0_imux: i2c0-imux@0 {
 		compatible = "i2c-mux-pinctrl";
-- 
2.27.0