Received: by 2002:a05:6a10:22f:0:0:0:0 with SMTP id 15csp610219pxk; Thu, 3 Sep 2020 08:11:28 -0700 (PDT) X-Google-Smtp-Source: ABdhPJz/l5IicAZf0kPEoxftOEQy9WUf7vhuGizS9rJer73vVpLaCuDrjPfC0AaDCm80BTkHDbLX X-Received: by 2002:a17:906:a24f:: with SMTP id bi15mr2707677ejb.379.1599145888206; Thu, 03 Sep 2020 08:11:28 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1599145888; cv=none; d=google.com; s=arc-20160816; b=hZ2LivsZrJ6Jnmc9DkyCRijB+2Mq5L/9594+PA6+DolKikyGkz35f2DwpbNOckvln3 WVhddI/zvzXTa5zwl/4A7n/soykDH09VMi+GZNkj1x5rbjgkKz8k1g0JZsNnq6SMIrUc B8kSHKCcyt0SS2QWJ9WdBM73zc5WJ3Up+Pohe0AkItmmC6W6126S53qn4SRytgvPMSbq hp6+ZpRGN8PziGSCgl/76byggddcXa47vtxyoNHhgaBaXUzbmaVjrFmchcRxqtSUjQa5 R8nLWE238PmtqDFJticor1/vWJD/HAhF20GuVI07LVEWq6YUJ2OUIk7xGzsb/+WOHAFr 1RcQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=XRvpe7PzFyq1DShY2dULOFSm0oGxR6/UVsj0il+srEc=; b=xUmTRmOcbWI2kdNXuZIGL1+AQ3WJdg5kT2fNvbJelbSPEE13k9oJSHsPxcZUAZ2ksY Lhc1cBnkdsSTXYtUryukJuX3V9nkFAQT3nSJgXxZAeMLX2H5Q72W2DO9mufQsOflM4Ii M9aHzSDes7BZ9RyoJnFuTCsCwJhuRWgTmVhDHlRCMk4Fm00uTHxfbRblCzsR1IGDUQJN DAMpAYar+0Ej5uHsVTqi+zEiJcrB2BAmEbZovC18JCZgRNlQ0MlI22yotj5aspHSmJz5 ZdHY2vwWfmfbIuKl7+Ut5mnUqKMSYg7qrPfmF7IJEZVIfHTxNQwRhpOuKzrflgmXSk2G +OtA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=IN5GaxFP; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id y2si1940974edu.414.2020.09.03.08.11.05; Thu, 03 Sep 2020 08:11:28 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=IN5GaxFP; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729356AbgICPKU (ORCPT + 99 others); Thu, 3 Sep 2020 11:10:20 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59168 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728969AbgICN5y (ORCPT ); Thu, 3 Sep 2020 09:57:54 -0400 Received: from mail-wm1-x341.google.com (mail-wm1-x341.google.com [IPv6:2a00:1450:4864:20::341]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 953F0C061A0C for ; Thu, 3 Sep 2020 06:31:47 -0700 (PDT) Received: by mail-wm1-x341.google.com with SMTP id s13so2897792wmh.4 for ; Thu, 03 Sep 2020 06:31:47 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=XRvpe7PzFyq1DShY2dULOFSm0oGxR6/UVsj0il+srEc=; b=IN5GaxFPRDx7b36byOHI33GaWymAiillen3XxsLHkFqwa6YRRJ3ND+KktmMOiaWw1X 2dYcPLte5/jlOOchGAn2kV6QCGeooRwzsQ1JSV7mIUCqxMwWNjbtjUI06bt054sQStK4 DG+HooWUdSj33fQOi6OydwqP+kJoQUxy5xdbAScmR3Ud88/U457WZ5syGCHTg6mlODoY 6AWmiwn25hW6Ze7+aNnQbvbBBBbG1D83p0q4E+16UcO4Xw/I941OYYiMQPNHFO3CqHDn T8O6KHHYdni3GXlk2woWP8wWfuEl3qIJPsdYMIGKBct36/rVRIy33bhTNpEeFKhHVU7A mQMg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=XRvpe7PzFyq1DShY2dULOFSm0oGxR6/UVsj0il+srEc=; b=dnUJfgpclx22M30c402YvNHw6NLgYlh+E9qcJx79LLzjk0dnLXVrgP5SOYQfjwrg8C VmKvP0gn7ftAVTCn23riHBaiIHH5h5PysCIjFqkRqbMn+Dwc+WRxCgy7T7CXIh+FL5Iq wmCsrquuzIOk3+8yMV9yU5aVUcENJ7UJ2PsjtUDVe5AgtZdPPrpBXBe5EAEKMROQJOcA xT+lFSNIv4tK7QTV0rHgwiE+vd3DvIjnEpyy+r27sg8C7CxgvTKhHkYxd1PK8qsr+kQN rRVnCvYvvQTLhdR1218//Seezlhi1AWr1Z2pfATUcIMpupqTQOR7zjzGdcqjmwBwsL3t lCpw== X-Gm-Message-State: AOAM530v2WFT7LPNQ7IPZTZjIGjRoaKTlmik58088v2T34dyx5X2SAwV nwARXI8MTh45/WWcKsKyCZ0xoQ== X-Received: by 2002:a7b:c397:: with SMTP id s23mr2641816wmj.174.1599139906064; Thu, 03 Sep 2020 06:31:46 -0700 (PDT) Received: from localhost.localdomain ([212.45.67.2]) by smtp.googlemail.com with ESMTPSA id b2sm4310768wmh.47.2020.09.03.06.31.44 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Thu, 03 Sep 2020 06:31:45 -0700 (PDT) From: Georgi Djakov To: linux-pm@vger.kernel.org, bjorn.andersson@linaro.org Cc: devicetree@vger.kernel.org, robh+dt@kernel.org, sibis@codeaurora.org, mka@chromium.org, dianders@chromium.org, georgi.djakov@linaro.org, linux-kernel@vger.kernel.org Subject: [PATCH v3 7/7] arm64: dts: qcom: sc7180: Increase the number of interconnect cells Date: Thu, 3 Sep 2020 16:31:34 +0300 Message-Id: <20200903133134.17201-8-georgi.djakov@linaro.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200903133134.17201-1-georgi.djakov@linaro.org> References: <20200903133134.17201-1-georgi.djakov@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Sibi Sankar Increase the number of interconnect-cells, as now we can include the tag information. The consumers can specify the path tag as an additional argument to the endpoints. Signed-off-by: Sibi Sankar Tested-by: Matthias Kaehlcke Reviewed-by: Matthias Kaehlcke Signed-off-by: Georgi Djakov --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 218 +++++++++++++-------------- 1 file changed, 109 insertions(+), 109 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index d3e6008cf3fb..d5007e61e6cc 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -132,7 +132,7 @@ &LITTLE_CPU_SLEEP_1 capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; next-level-cache = <&L2_0>; #cooling-cells = <2>; @@ -158,7 +158,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; next-level-cache = <&L2_100>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -180,7 +180,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; next-level-cache = <&L2_200>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -202,7 +202,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; next-level-cache = <&L2_300>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -224,7 +224,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; next-level-cache = <&L2_400>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -246,7 +246,7 @@ &LITTLE_CPU_SLEEP_1 dynamic-power-coefficient = <100>; next-level-cache = <&L2_500>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -268,7 +268,7 @@ &BIG_CPU_SLEEP_1 dynamic-power-coefficient = <405>; next-level-cache = <&L2_600>; operating-points-v2 = <&cpu6_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -290,7 +290,7 @@ &BIG_CPU_SLEEP_1 dynamic-power-coefficient = <405>; next-level-cache = <&L2_700>; operating-points-v2 = <&cpu6_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -748,7 +748,7 @@ qupv3_id_0: geniqup@8c0000 { #size-cells = <2>; ranges; iommus = <&apps_smmu 0x43 0x0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>; interconnect-names = "qup-core"; status = "disabled"; @@ -762,9 +762,9 @@ i2c0: i2c@880000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -782,8 +782,8 @@ spi0: spi@880000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -798,8 +798,8 @@ uart0: serial@880000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -814,9 +814,9 @@ i2c1: i2c@884000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -834,8 +834,8 @@ spi1: spi@884000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -850,8 +850,8 @@ uart1: serial@884000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -866,9 +866,9 @@ i2c2: i2c@888000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -884,8 +884,8 @@ uart2: serial@888000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -900,9 +900,9 @@ i2c3: i2c@88c000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -920,8 +920,8 @@ spi3: spi@88c000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -936,8 +936,8 @@ uart3: serial@88c000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -952,9 +952,9 @@ i2c4: i2c@890000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -970,8 +970,8 @@ uart4: serial@890000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -986,9 +986,9 @@ i2c5: i2c@894000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, - <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1006,8 +1006,8 @@ spi5: spi@894000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1022,8 +1022,8 @@ uart5: serial@894000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1039,7 +1039,7 @@ qupv3_id_1: geniqup@ac0000 { #size-cells = <2>; ranges; iommus = <&apps_smmu 0x4c3 0x0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>; interconnect-names = "qup-core"; status = "disabled"; @@ -1053,9 +1053,9 @@ i2c6: i2c@a80000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1073,8 +1073,8 @@ spi6: spi@a80000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1089,8 +1089,8 @@ uart6: serial@a80000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1105,9 +1105,9 @@ i2c7: i2c@a84000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1123,8 +1123,8 @@ uart7: serial@a84000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1139,9 +1139,9 @@ i2c8: i2c@a88000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1159,8 +1159,8 @@ spi8: spi@a88000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1175,8 +1175,8 @@ uart8: serial@a88000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1191,9 +1191,9 @@ i2c9: i2c@a8c000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1209,8 +1209,8 @@ uart9: serial@a8c000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1225,9 +1225,9 @@ i2c10: i2c@a90000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1245,8 +1245,8 @@ spi10: spi@a90000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1261,8 +1261,8 @@ uart10: serial@a90000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1277,9 +1277,9 @@ i2c11: i2c@a94000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, - <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; @@ -1297,8 +1297,8 @@ spi11: spi@a94000 { #size-cells = <0>; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1313,8 +1313,8 @@ uart11: serial@a94000 { interrupts = ; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qup_opp_table>; - interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -1323,63 +1323,63 @@ uart11: serial@a94000 { config_noc: interconnect@1500000 { compatible = "qcom,sc7180-config-noc"; reg = <0 0x01500000 0 0x28000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; system_noc: interconnect@1620000 { compatible = "qcom,sc7180-system-noc"; reg = <0 0x01620000 0 0x17080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mc_virt: interconnect@1638000 { compatible = "qcom,sc7180-mc-virt"; reg = <0 0x01638000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; qup_virt: interconnect@1650000 { compatible = "qcom,sc7180-qup-virt"; reg = <0 0x01650000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre1_noc: interconnect@16e0000 { compatible = "qcom,sc7180-aggre1-noc"; reg = <0 0x016e0000 0 0x15080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre2_noc: interconnect@1705000 { compatible = "qcom,sc7180-aggre2-noc"; reg = <0 0x01705000 0 0x9000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; compute_noc: interconnect@170e000 { compatible = "qcom,sc7180-compute-noc"; reg = <0 0x0170e000 0 0x6000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sc7180-mmss-noc"; reg = <0 0x01740000 0 0x1c100>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; ipa_virt: interconnect@1e00000 { compatible = "qcom,sc7180-ipa-virt"; reg = <0 0x01e00000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -1406,9 +1406,9 @@ ipa: ipa@1e40000 { clocks = <&rpmhcc RPMH_IPA_CLK>; clock-names = "core"; - interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>, - <&aggre2_noc MASTER_IPA &system_noc SLAVE_IMEM>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>; + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; interconnect-names = "memory", "imem", "config"; @@ -1899,7 +1899,7 @@ gpu: gpu@5000000 { operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; - interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>; + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "gfx-mem"; gpu_opp_table: opp-table { @@ -2565,8 +2565,8 @@ qspi: spi@88dc000 { clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, <&gcc GCC_QSPI_CORE_CLK>; clock-names = "iface", "core"; - interconnects = <&gem_noc MASTER_APPSS_PROC - &config_noc SLAVE_QSPI_0>; + interconnects = <&gem_noc MASTER_APPSS_PROC 0 + &config_noc SLAVE_QSPI_0 0>; interconnect-names = "qspi-config"; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&qspi_opp_table>; @@ -2625,7 +2625,7 @@ usb_1_ssphy: phy@88e9200 { dc_noc: interconnect@9160000 { compatible = "qcom,sc7180-dc-noc"; reg = <0 0x09160000 0 0x03200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -2639,14 +2639,14 @@ system-cache-controller@9200000 { gem_noc: interconnect@9680000 { compatible = "qcom,sc7180-gem-noc"; reg = <0 0x09680000 0 0x3e200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; npu_noc: interconnect@9990000 { compatible = "qcom,sc7180-npu-noc"; reg = <0 0x09990000 0 0x1600>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -2682,8 +2682,8 @@ usb_1: usb@a6f8800 { resets = <&gcc GCC_USB30_PRIM_BCR>; - interconnects = <&aggre2_noc MASTER_USB3 &mc_virt SLAVE_EBI1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3>; + interconnects = <&aggre2_noc MASTER_USB3 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>; interconnect-names = "usb-ddr", "apps-usb"; usb_1_dwc3: dwc3@a600000 { @@ -2715,8 +2715,8 @@ venus: video-codec@aa00000 { "vcodec0_core", "vcodec0_bus"; iommus = <&apps_smmu 0x0c00 0x60>; memory-region = <&venus_mem>; - interconnects = <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_VENUS_CFG>; + interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>; interconnect-names = "video-mem", "cpu-cfg"; video-decoder { @@ -2741,7 +2741,7 @@ videocc: clock-controller@ab00000 { camnoc_virt: interconnect@ac00000 { compatible = "qcom,sc7180-camnoc-virt"; reg = <0 0x0ac00000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; };