Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Jonathan Marek <jonathan@marek.ca>
To:     linux-arm-msm@vger.kernel.org
Cc:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Michael Turquette <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        linux-clk@vger.kernel.org (open list:COMMON CLK FRAMEWORK),
        devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v2 1/7] dt-bindings: clock: sdm845-dispcc: same name for dp_phy clocks as sc7180
Date:   Thu,  3 Sep 2020 18:26:09 -0400
Message-Id: <20200903222620.27448-2-jonathan@marek.ca>
In-Reply-To: <20200903222620.27448-1-jonathan@marek.ca>
References: <20200903222620.27448-1-jonathan@marek.ca>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This makes it easier to combine dt bindings for sdm845/sc7180 dispcc.

Note: nothing upstream provides these clocks and the sdm845 dispcc driver
hasn't switched to using .fw_name for these clocks (these properties are
ignored), so changing this shouldn't be a problem.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 .../devicetree/bindings/clock/qcom,sdm845-dispcc.yaml     | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
index 4a3be733d042..ead44705333b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
@@ -43,8 +43,8 @@ properties:
       - const: dsi0_phy_pll_out_dsiclk
       - const: dsi1_phy_pll_out_byteclk
       - const: dsi1_phy_pll_out_dsiclk
-      - const: dp_link_clk_divsel_ten
-      - const: dp_vco_divided_clk_src_mux
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
 
   '#clock-cells':
     const: 1
@@ -92,8 +92,8 @@ examples:
                     "dsi0_phy_pll_out_dsiclk",
                     "dsi1_phy_pll_out_byteclk",
                     "dsi1_phy_pll_out_dsiclk",
-                    "dp_link_clk_divsel_ten",
-                    "dp_vco_divided_clk_src_mux";
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-- 
2.26.1